Weirs, Sluices, Flumes, Gates Equipment in USA

  • Plasti-Fab - H, HS and HL Flumes

    The H flume and related HS & HL flumes are gaining in popularity due to their ability to handle wide ranging flows that can vary by as much 100:1 or more from low to peak. Because of the unique throat, which resembles a weir in some respects, the H flumes provide excellent resolution at low flows and still have capacity to capture peak flow ...

    By Plasti-Fab, Inc. based in Tualatin, OREGON (USA). from Flumes Product line

  • Neoprene Flap Gates

    The Plasti-Fab flexible Neoprene Flap Gate is the answer for applications requiring corrosion resistant equipment suitable for sea water and most low pH water. Simple construction and light weight make installation and maintenance easy. The Flap Gate's molded body of reinforced copolymer has a 125 lb. pattern flange and a molded neoprene flap ...

    By Plasti-Fab, Inc. based in Tualatin, OREGON (USA). from Gates Product line

  • Quarter-Frame End Dumps

    Cement's Quarter-Frame steel end dump has become the standard against which other trailers are now judged. With the high dump point of a frame and the stabilizer arms of a frameless, the Clement Quarter-Frame is the ultimate trailer for stockpling and dumping asphalt into a dumping machine. The Clement Quarter-Frame offers the paving contractor ...

    By Clement Industries based in Minden, LOUISIANA (USA). from Bathtub End Dumps Product line

  • SkimOil - Model FWS - Floating Weir Skimmer

    This is a simple floating well-proven oil skimmer that works with any pump that can pull suction. The unique FWS never needs manual adjustment. NEVER! The FWS skimmer is a surface skimmer. The FWS Floating Weir Skimmer is automatically self adjusting to your pump’s flow rate—meaning that by controlling your pump’s flow ...

    By SkimOil Inc. based in Carrboro, NORTH CAROLINA (USA). from Oil Skimmers Product line

  • Weirs

    Weirs are the workhorse of any treatment plant.  By definition, they control the overflow rate of water through the hydraulic profile.  JC-Fabrications can provide weirs to meet almost any specification, from V-notch weirs to sharp-crested and flat top weirs, in standard 12' lengths or custom lengths up to 20'.  Our weirs are ...

    By JC-Fabrications, LLC based in Boca Raton, FLORIDA (USA).

  • Plasti-Fab - Large Trapezoidal Flumes

    Trapezoidal flumes fall into two principal groups, 60º V-notch flumes and larger trapezoidal flumes. The 60º V flumes have a sharp V-throat section similar to a V-notch weir and produce superior resolution for accurate flow measurement down to 1 gpm. The larger trapezoidal flumes, up to the 2 foot SRCRC flume, have flat floors and ...

    By Plasti-Fab, Inc. based in Tualatin, OREGON (USA). from Flumes Product line

  • Model Series 900 - Stainless Steel Gates

    Series 900 Stainless Steel Gates offer high performance and long life in designs which accommodate a wide range of mounting arrangements and flow conditions. Rugged, rein forced stainless steel construction is combined with tough, flexible ultra high molecular weight polyethylene (UHMW) seat/seals, to provide a heavy-duty assembly. Flush bottom ...

    By Whipps, Inc. based in Athol, MASSACHUSETTS (USA). from Stainless Steel Gates Product line

  • Stand-Alone Sluice Gates

    WT’s  Smart Sluice Gates are fully integrated, independent, 100% complete control stations that can be instantly deployed for reservoir and canal control, check structures canal turnout, pipeline, pump station, water treatment, and flood control applications. Smart Sluice Gates Shipped complete: WT’S Smart irrigation gate is ...

    By Watch Technologies based in Grants Pass, OREGON (USA). from Sluice Gates Product line

  • Golden Harvest - Model GH-39 - Stainless Steel & Aluminum Flap Gates

    Golden Harvest, Inc. supplies Flap Gates in stainless steel, aluminum, and spun aluminum and supplied with neoprene seals. Flexible design available in square, rectangular and circular shapes. Automatic, circular opening for gravity flow and pump discharge can be aluminum or stainless steel. Stainless steel construction is recommended for pump ...

    By Golden Harvest, Inc. based in Burlington, WASHINGTON (USA). from Flap Gates Product line

  • Palmer-Bowlus Flume

    The Palmer-Bowlus flume is a fixed hydraulic structure originally developed to measure sanitary sewage / wastewater flows. The Palmer-Bowlus flume is second most common flume used to measure industrial discharges, municipal sewer flows, and influent / effluent at wastewater treatment plants, second only to the Parshall flume.

    By Openchannelflow based in Atlanta, GEORGIA (US) (USA). from Flumes Product line

  • Split Gates

    Dual blade, dual action, automated, solar-powered or AC, Smart Split Gates by Watch Technologies combines the functionality of two separate gates into one: bottom-up discharge flow control, debris sluicing, and automatic emergency dump, and top-down surface control and/or measuring weir. Easily deployed and programmed, cost efficient, reliable. ...

    By Watch Technologies based in Grants Pass, OREGON (USA). from Sluice Gates Product line

  • Tecweigh - Control Gates

    Tecweigh Control Gates provide flow control of aggregate materials ranging from sand to 6' material for load-out, batching and blending applications.Control gates feature heavy duty galvanized steel construction and permanently lubricated motor, gearbox and bushings. A precision position sensor monitors open/closed percentage, and flow switch ...

    By Tecnetics Industries, Inc. based in St. Paul, MINNESOTA (USA). from Control Gates Product line

  • Cutthroat Flume

    Developed in the mid-1960's the Utah State University Water Research Laboratory, Cutthroat flumes are sized by throat width and overall length. A number of styles are commercially available. The most commonly used types are listed in the chart below. Note that it is not uncommon for intermediate (or even custom) sizes to be specified.

    By Tracom Fiberglass Products based in Alpharetta, GEORGIA (US) (USA). from Water and Wastewater Product line

  • Model MONO Series - Knife Gate Valves

    The Mono knife gate valve, designed by Weco Armaturen Germany*,has a unique one piece bonneted body to reduce operating torque and eliminate potential leakage of odors to atmosphere.Manufactured by Jash Engineering the Mono series knife gate valve meets TAPPI - MSS- SP81, TIS-405-8 standards and compliant withnew AWWA-C 520-10 requirements.

    By PMP Precision Valve Co. Ltd. Office in Tonawanda, NEW YORK (USA). from Knife Gates Product line

  • Weir-Wolf - Automated Brush System

    The Weir-Wolf automated brush system is designed to clean the weirs, baffles, effluent spillways and launders of water and wastewater clarifiers and thickeners. The Weir-Wolf weir cleaning systems are designed to attach to the skimmer arms of these tanks without adding any additional strain, torque nor energy consumption to drive motors of the ...

    By Ford Hall Company, Inc based in Richmond, KENTUCKY (USA).

  • Model 450 - Flap Gate

    Series 450 Flap Gates are used for backflow prevention in gravity flow; pump discharge and tidal applications. Fabricated Flap Gates offer high performance and long life in designs that accommodate a wide range of mounting arrangements and flow conditions. Rugged, reinforced construction is combined with a resilient seal to provide a heavy-duty, ...

    By Whipps, Inc. based in Athol, MASSACHUSETTS (USA). from Flap Gates Product line

  • Premium

    Eijkelkamp - Model 13.17.02 - Water discharge Measurements: RBC Flumes

    RBC flumes are used to measure the quantity of water that, for instance, flows through an irrigation channel. By comparison to known flumes, such as the WSC-and the Parshall flume, the RBC flume is the most accurate. The RBC flume has been specially designed for use in smaller water ways or earthen channels (irrigation channels, in- outlets, ...

    By Eijkelkamp Soil & Water Distributor in CALIFORNIA (USA). from Sensors & Monitoring Product line

  • Flomotion Systems - Model 900 - Open Channel Flow Measurement System

    The FLOMOTION 900 provides accurate non-contact ultrasonic open channel flow measurement. Simple programming allows selection from a list of common built-in weir and flume tables. In addition, head vs. flow data points may be input for almost any type of primary device.

    By Flomotion Systems, Inc. based in Buffalo, NEW YORK (USA). from Flowmeters - Open Channel Product line

  • Accuron - Model 7100 - Single Range Open Channel Cartridge Meters

    The Accuron 7100 Cartridge Meter is a factory integrated unit, designed for open channel flow measurement. The revolutionary design combines a trapezoidal flume section and the ultrasonic height sensor in a stainless steel cartridge. The Cartridge Meter has been designed for open channel flow measurement in sewer manholes. With the ease of ...

    By Eastech Flow Controls based in Upper Saddle River, NEW JERSEY (USA). from Open Channel Cartridge Meters Product line

  • RF-INSAMCOR - Model LW - Knife Gate Valves

    Knife Gate Valves For knife gate valves that perform in the most challenging conditions, trust in Insamcor.

    By RF Valves, Inc based in Hanover, MARYLAND (USA). from Knife Gate Valves Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you