Well Maintenance Equipment For Water And Wastewater In Singapore
-
Manufactured by HORIBA Europe GmbHbased in GERMANY
The APMA-370 is a device for continuously monitoring CO concentrations using a Non-dispersion cross modulation infrared analysis method. The APMA-370 employs an independent, internal dry-method sampling device to achieve the highest levels of sensitivity and accuracy. The dry method, due to its capability for continuously monitoring and instantaneously analyzing of gas in its unaltered state as ...
-
Manufactured by Singnergy Corporation Pte Ltdbased in SINGAPORE
REVOZ is a revolutionary dryer, the first in the world utilizing induction heating and compression to intensify the drying process. The heat is directly translated from the heating source to the heating substance. No heating medium such as hot air, steam or thermal oil is required to convey the heat. Therefore, REVOZ is capable of achieving very low energy ...
-
Manufactured by ANDRITZ Separation - ANDRITZ Groupbased in AUSTRIA
The PUREVO pharma peeler centrifuge is a perfect combination of innovation and technological evolution that meets the highest hygienic and purity standards. PUREVO is the advancement of the Krauss-Maffei HZ Ph peeler centrifuge from ANDRITZ KMPT. In close cooperation with our customers, proven technologies have been combined with innovative design features, leading to excellent separation ...
-
Manufactured by Control Instruments Corporation (CIC)based in USA
Operating Temperature: 60°C - 140°F. The Model SNR671 is an industrial strength assembly consisting of a heated flame cell and an integrated controller that continuously measures total flammable vapor concentrations from 0 to 100% of the Lower Flammable Limit (LFL) range. Optional modifications allow the SNR671 to sample low oxygen and inert ...
-
Manufactured by Environmental Dynamics International (EDI)based in USA
Material Features: Clog resistant, large diameter diffuser elements with above water air distribution piping. 1” & 2” nominal pipe sizes available. Turbulent mixing with multiple shear planes and edge contours to fragment bubbles for maximum efficiency. High bubble shear for maximum mixing. Low maintenance. ABS—non-corrosive ...
-
Manufactured by Environmental Dynamics International (EDI)based in USA
Material Features: Simplex or duplex configuration. Designed for high airflow capacity. Available in 24-inch length (610 mm). Clog resistant self-purge design. Full 48-inch air release perimeter (1220 mm). Standard units in stock for immediate shipment. Standard open bottom with optional closed bottom units available. PVC or optional CPVC construction for maximum chemical and temperature ...
-
Manufactured by Environmental Dynamics International (EDI)based in USA
Coarse bubble diffuser systems offer moderate oxygen transfer efficiency and low maintenance with aggressive mixing, providing circulation and turbulence that ensures the entire water column is mixed adequately and sludge accumulation is limited. They are a very robust solution, with no moving parts in the water and orifices that are less prone to clogging than other forms of ...
-
Manufactured by Control Instruments Corporation (CIC)based in USA
The Model 650 FID is a high-temperature flame ionization sensor that continuously measures total hydrocarbon concentrations. Industrial Design: Rugged industrial strength assembly suitable for continuous use in harsh environments. Direct Mount: Design eliminates heat-traced sample lines & allows the fastest response time. Fully Heated: To avoid condensation during sampling, the entire sensor ...
-
Manufactured by Control Instruments Corporation (CIC)based in USA
Operating Temperature: 270°C - 518°F. The Model SNR675 is an industrial strength assembly consisting of a heated flame cell and an integrated controller that continuously measures total flammable vapor concentrations from 0 to 100% of the Lower Flammable Limit (LFL) range. Optional modifications allow the SNR675 to sample low oxygen and inert ...
-
Manufactured by Control Instruments Corporation (CIC)based in USA
Operating Temperature: 200deg;C - 392deg;F. The Model SNR674 is an industrial strength assembly consisting of a heated flame cell and an integrated controller that continuously measures total flammable vapor concentrations from 0 to 100% of the Lower Flammable Limit (LFL) range. Optional modifications allow the SNR674 to sample low oxygen and inert ...
-
Manufactured by Control Instruments Corporation (CIC)based in USA
Operating Temperature: 120°C - 248°F. The Model SNR672 is an industrial strength assembly consisting of a heated flame cell and an integrated controller that continuously measures total flammable vapor concentrations from 0 to 100% of the Lower Flammable Limit (LFL) range. Optional modifications allow the SNR672 to sample low oxygen and inert ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you