Well Monitoring Equipment For Water And Wastewater Available In North Dakota
-
based in FRANCE
A complete and fully scalable monitoring solution, for all sizes of IT environments. Monitor your IT estate regardless of location, whether its on-premises, in dynamic environments, public cloud or a hybrid of these. OP5 Monitor is equipped to meet the monitoring demands of the most complex infrastructure. OP5 is highly customisable and can be adapted to your exact needs, without the cost of ...
-
Manufactured by Clampon ASbased in NORWAY
Any owner or operator of a factory would surely like to operate it as efficiently and profitably as possible. An oil or gas well can be regarded as a factory, and the ClampOn sand detector gives operators the best tool for maximizing profits. ClampOn’s DSP systems operate on thousands of wells every year, and the company is the world’s largest supplier of sand monitoring systems. ...
-
Manufactured by E.S.I. Environmental Sensors Inc.based in CANADA
In the production side of the oil industry, mature wells produce high percentages of water with each pump stroke. It has become necessary to ensure that even low productivity wells remain in production. Most efficient pumping rates can be attained by measuring oil/water contents at the well head. Flo Point is the ideal method providing the ...
-
Manufactured by Mettler - Toledo Int. Incbased in SWITZERLAND
EasyClean150 is the most cost-effective unit for the automated flushing of sensors installed in a pneumatically operated retractable housing. The system controls the movement of the housing as well as monitoring the flushing function for the sensor. EasyClean150 is suitable for applications in which the use of water as a cleaning medium is ...
-
Manufactured by Abaxisbased in USA
The VETSCAN VSpro is an easy-to-use coagulation analyzer enabling canine and feline PT (prothrombin time) and aPTT (activated partial thromboplastin time) testing and equine fibrinogen testing. With an incredibly simple and intuitive user interface, it enables you to enhance your clinic’s capabilities and obtain important information on-site within minutes, especially valuable for ...
-
Manufactured by Neptune Technology Group Inc.based in USA
Neptune’s ProCoder™, when connected to R900® System endpoints, provides a high-resolution, 8-digit remote meter reading, as well as leak, tamper, and reverse flow detection. ...
-
Manufactured by Calgon Carbon Corporationbased in USA
The DISPOSORB canisters have been developed by Calgon Carbon Corporation for rapid deployment and cleanup of low flow treatment applications such as off-spec products, accidental spills, wash water or runoff water treatment or temporary groundwater cleanups. The DISPOSORB canisters contain all of the design features of a full scale adsorber, but are easily transportable and are intended to be ...
-
Manufactured by Develogicbased in GERMANY
The new MI.Sat II buoy is based on a design already proven in various deployments near the Cape Verde Islands and in the Irminger Sea south of Greenland. The buoy is suitable for deep water moorings with mooring lengths of 6,000m and more. As the unit is designed to withstand external pressure up to 50bar, temporary submerging during deployment or heavy weather is not a ...
-
Manufactured by SEBA Hydrometrie GmbH & Co. KGbased in GERMANY
Mobile Pocket handset to determine the water level to a depth of 15m in monitoring wells from Ø 1" // Optical and acoustic signal upon contact with water // Extendable functionality (basic button, saltwater probe cap etc.) ...
-
Manufactured by Sabio Environmentalbased in USA
Collecting and distributing homogenous air samples for analysis is easy with the Model 1002 and 1004 heated sample manifolds. With the ability to work equally well in dry, humid or chemically harsh environments, each manifold is well suited for any monitoring project. For durability and reactive inertness, the Model 1002 is constructed of 316 stainless steel and the Model 1004 is constructed with ...
-
Manufactured by Cerlic Environmental Control Inc.based in GEORGIA
The ITX-IL In-Line Suspended Solids Sensor is the ultimate tool for effective process control supplied with 1 ½” SS isolation valve. Designed for up to 87 psig (6 bar) applications with built-in mechanical stop. The sensor is used for continous measurement of suspended solids in RAS, WAS, MLSS and Sand Filter Backwash monitoring in industrial plants. The measuring principle is a ...
-
Manufactured by Burt Process Equipment, Inc. (BPE)based in USA
Spec Master family of pH adjustment systems is engineered to meet the most demanding specifications for quality and performance. Our Spec Master BPSM units use components of the highest quality for optimal durability and reliability during a wastewater treatment process. They’re custom built to your requirements and engineering specifications. Our custom modifications are based on proven ...
-
Manufactured by Geoprobe Systems -Kejr, Inc.based in USA
The DT22 system is the fastest growing sampling system in the industry! It uses Geoprobe 2.25 in. (57 mm) OD probe rods as an outer casing and Geoprobe Light-Weight Center Rods for the inner rod string. Primarily used under the Geoprobe GH40 & GH60 series machines. The main advantage of sampling through a cased hole is that there is no side slough to contend with. In addition, the outer ...
-
Manufactured by Westbay Instruments - part of Nova Metrix LLCbased in CANADA
The Westbay System is unsurpassed for the flexibility of design provided for the field hydrogeologist. Each Westbay System monitoring well is comprised of modular casing, packers, and valved port couplings. Additional components can be added for additional monitoring zones - essentially without limit. This is useful if drilling operations encounter more complex conditions than anticipated. Holes ...
-
Manufactured by Probodeltbased in SPAIN
Within the processes of continuous improvement, Probodelt SL presents a new version of the fly trap Hemitrap. HEMITRAP is the fruit fly trap, specially designed for liquid attractants, that became commercially available in spring ...
-
Manufactured by ChemGroutbased in USA
The ChemGrout CG-500HP series are skid mounted, high-pressure grout plants. These units feature two 70-gallon (265 liters) mixing tanks, a 21-gallon (80 liters) holding hopper and a high-pressure plunger grout pump. The unique double mix tank design permits continuous pumping as each mix tank alternates feeding the ...
-
Manufactured by AquaBlok, Ltd.based in USA
Providing a Multi-Use, Self-Compacting, Bentonite-Based Seal for Repair of Penetrations to Certified Landfill ...
-
Manufactured by Pulsar Measurementbased in UNITED KINGDOM
Specifically developed for sand monitoring in the oil and gas industry, the iSensys SandAlert monitor is a sand and particle monitor that is ideal wherever you need to keep wells producing efficiently. Sand production for oil and gas operators is an increasing problem and can cause catastrophic damage to well and rig equipment. The SandAlert provides robust, dependable sand monitoring data, so ...
-
Manufactured by INOX Pty. Ltdbased in AUSTRALIA
Height requirement restrictions and operator ergonomics are considerable factors when selecting and designing your machinery. Up to 1000L, an operator loading height of 1,000mm is available. Because INOX custom designs equipment to suit your specific requirements, custom design and consultation with INOX staff is another key factor that influences purchasing from a local ...
-
Manufactured by SPOHR-Messtechnik GmbHbased in GERMANY
The round sealing cap is ideal for flush mount wells, because the pipes can be cut to the correct height and no adaptor is required for the well cap. An additional advantage is that locking takes place centrally from above, and this means that no space issues arise when opening and closing. Fastening takes place using a clamping ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you