Well Pumps Downloads

  • Premium

    Orlita - Model MH - Hydraulic Diaphragm Metering Pump - Brochure

    Hydraulic diaphragm liquid end. A metal diaphragm hermetically separates the product chamber from the hydraulic component. The diaphragm is moved during the pressure and suction stroke action by the hydraulic fluid dis placed by the plunger. An overflow valve as well as an automatic bleed valve for the hydraulic chamber are integrated in the pump end. The valveless forced anti-cavitation of ...

  • Premium

    DULCO - Model flex DF4a - Peristaltic Pump for Flocculant Metering - Brochure

    Capacity range 1.5 – 12 l/h, 4 – 2 bar; The peristaltic pump DULCO flex DF4a for metering flocculants and activated charcoal treats water precisely and accurately. It is ideal for use in swimming pools, hot tubs or spa and wellness facilities. An operating pressure up to 4 bar is ...

  • Premium

    Orlita - Model MF - Hydraulic Diaphragm Metering Pump - Brochure

    Hydraulic diaphragm liquid end. The dual PTFE diaphragm hermetically seals off the product chamber from the hydraulic component. The diaphragm is moved during the pressure stroke action solely by the hydraulic fluid and supported if necessary during the suction action by a mechanical coupling. Thanks to this combined functional principle, the MF head achieves its extraordinary suction ...

  • Premium

    Geotech AP4+ Pneumatic Positive Air Displacement Pump - Datasheet

    The AP4+ Top Inlet Short, AP4+ Low Drawdown Top Inlet, AP4+ Bottom Inlet Short and AP4+ Low Drawdown Bottom Inlet AutoPump provide maximum capabilities and flow in a pump for 4” (100mm) diameter and larger wells and the need for an elevated inlet, such as pumping total fluids from wells contaminated with LNAPLs. Where there is the need to pump down to as low as 24 inches (62 cm) above the ...


    By Geotech

  • Premium

    Geotech AP3 Pump Pneumatic Positive Air Displacement Pump - Datasheet

    The AP3 Top Inlet, Short AutoPump is designed for applications requiring an elevated inlet, such as pumping total fluids from wells contaminated with LNAPLs. The AP3 Bottom Inlet Short AutoPump is designed for wells having shorter water columns and / or the need to pump down to lower water levels, compared to full-length ...


    By Geotech

  • Premium

    106 / 206-DW Operations Guide

    Singer Model 106/206-DW is a deep well pump control valve designed to eliminate starting and stopping surges of deep well pumps. The main valve is a single seated, hydraulically operated, diaphragm actuated, globe or angle patter n valve. The main valve is controlled by a solenoid pilot valve, utilizing line pressure for operation. The valve has a Limit Switch, which shuts down the pump when the ...


    By Singer Valve Inc.

  • Premium

    Slider Pump for Reliable Pumping in Angled Wells - Datasheet

    Slant wells are useless without the right pumps. Slider pumps have proprietary angle-independent valves to operate on any angle. They provide excellent resistance to sediment clogging and solvent ...


    By Geotech

  • Premium

    Geotech AP2 Bottom Inlet Short and Top Inlet Short AutoPumps - Datasheet

    The AP2 Bottom Inlet Short and the AP2 Top Inlet Short AutoPumps both provide maximum capabilities and flow in a pump for 2“ (50 mm) diameter wells. The AP2 Bottom Inlet Short AutoPump can handle even severe remediation and landfill pumping and applications, whilst the AP2 Top Inlet Short AutoPump is also suitable for wells having shorter water columns and / or the need to pump down ...


    By Geotech

  • Premium

    Models 106-DW / 206-DW - Deep Well Pump Control Valve – Double Chamber Brochure

    The 106-DW and 206-DW deep well pump control valves are installed in a tee between the pump discharge and the check valve. The valve is normally open, and, on pump start-up, a pilot solenoid is energized to start closing the valve at a rate governed by the closing speed control. Initially, the valve discharges air, water and sand to waste. The open valve discharges all pump flow. As the valve ...


    By Singer Valve Inc.

  • Premium

    TD-16 Coated Granular Bentonite Grouting Material - Brochure

    TD-16 is a one-step coated granular bentonite grouting material designed to achieve low permeability seals in water wells, geotechnical borings, and heat pump applications. TD-16 achieves a range of solids contents, 16% to 20% solids by weight. TD-16’s granular nature reduces dusty conditions during mixing operations and slurry loss to the formation after ...


    By Wyo-Ben, Inc.

  • Premium

    GROUT-WELL AND GROUT-WELL DF Bentonite Grouting Material - Brochure

    GROUT-WELL and GROUT-WELL DF are one step bentonite grouting materials designed to achieve low permeability seals in water wells, monitor wells, geotechnical borings, and heat pump holes. GROUT-WELL and GROUT-WELL DF achieve a range of solids contents, 17% to 20% solids by weight. GROUT-WELL DF’s granular nature reduces nuisance dust during mixing ...


    By Wyo-Ben, Inc.

  • Premium

    Eijkelkamp - Model 12.13 - Hand-Operated Foot Valve Pump Set Manual

    Two tubes, with a diameter of 10 or 16 mm, can be fitted on the hand-operated foot valve pump. The lever hinges on a tripod of which the height can be adjusted. In this way it is possible to take samples from wells fitted with a shaft type well cover as well as street type well covers. The hinge point of the lever can be moved quickly, in this way the stroke lever ratio can be adjusted which ...


    By Eijkelkamp Soil & Water

  • Model RTU - Pump Controller Manual

    The perfect pump controller will lower your operating costs. You will get lower power consumption, longer lifetime of the pump and better utilization of the sewer system and wells. A modern MJK RTU Pump Controller, not only just activate pumps – it is an intelligent, programmable device, which among many standard features, uses the parameters you decide to calculate the most efficient ...

  • Eliminator - Pump System - Brochure

    The Eliminator is a high capacity bladder pump designed for DNAPL removal in 2” (50 mm) and 4” (100 mm) wells. The Eliminator is also used to handle viscous contaminants, such as crude oil. The Eliminator uses a bladder of PTFE or elastomer to isolate the pump air supply from the pumped liquid. As a result, there is no contact between the drive air and the contaminated fluids inside ...

  • Models HR4105D and HR4105SS - Well Development Pump - Installation & Operation Manual

    QED's well development pumps are double action high rate purge pumps designed to develop 2" and 4" wells. As the operator lifts the pump within the well by pulling up on the tubing, flexible wipers attached to the pump sweep the well casing wall creating a surge-block action. The Surging draws small particles through the well screen and into the well casing, where the well development pump pumps ...

  • Pulse Pump - Pneumatic Pumping System - Brochure

    The Pulse Pump system from QED Environmental Systems can be used in many different applications and in various configurations. The simplest system would consist of a controller, well cap, tubing, exhaust valve, and pump. Many options are available, including floating layer inlets and on/off level control. Pumps are available in a wide range of sizes and materials. Included in this manual are ...

  • MicroPurge - Model MP50 - Compressor/Controller - Instruction Manual

    The MP50 Micro Purge Basics Controller/Compressor is used to operate QED Well Wizard bladder sampling pumps to purge and sample ground water. The MP50 has specific design features to make MicroPurge sampling ...

  • Model VS Series - 4" Submersible Pumps Brochure

    Fully stainless steel submersible multistage pumps at NEMA standards, suitable  for pumping of clean water in 6” wells, water plants and systems for residential and industrial use, pressurizing systems and irrigation ...


    By Stac s.r.l.

  • Model VS Series - 8" Submersible Pumps Brochure

    Fully stainless steel submersible multistage pumps at NEMA standards, suitable for pumping of clean water in 8” wells, water plants and systems for residential and industrial use, pressurizing systems and irrigation plants. Pumps have to be coupled with 6” or 8” submersible motors at NEMA standards, lubricated either with non-toxic oil, either with water. Oil lubricated motors ...


    By Stac s.r.l.

  • Model VY Series - 4" Submersible Pumps Brochure

    Submersible multistage pumps at NEMA standards, suitable for pumping of clean water in 6” wells in residential, agricultural and industrial sector, pressurizing systems and irrigation plants. The delivery and suction body is in micro-castes stainless steel AISI304. Pump have 3” threated outlet and an integrated nonreturn ...


    By Stac s.r.l.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you