Aerosol Monitoring Applications

19 Results found
Only show results available in Virginia?
OK
  • Category: Air & Climate ×

  • Subcategory: Aerosol Monitoring ×

Natural gas gathering system for inlet gas separation

by Pentair Filtration Solutions, LLC     based in Conroe, TEXAS (USA)

Natural gas gathering systems deliver large volumes of gas via pipleline to the central inlet of the gas processing facility. Removal of solid contaminants and free liquids present in the inlet gas is critical to the downstream process. Iron oxides, iron sulfides, dirt and other deformable particles can flow into the processing system. Effective removal of these contaminants is needed to prevent fouling. Pentair Porous Media technologies will help with a clean, natural gas feed, reducing upsets and associated downtime and increase productivity, lowering capital costs with fewer change-outs.

Particulate matter, halogens and aerosols

by Chemisch Thermische Prozesstechnik GmbH / CTP Air Pollution Control     based in Graz, AUSTRIA

Without CTP's innovative upstream systems, regenerative thermal oxidation would not be possible, which would render the waste gas purification cost-intensive and inefficient. Continuous burning off in the RTOs eliminates the deposits which periodically clog the ceramic honeycomb blocks.

Aerosol and particle technology for process control industry

by Palas GmbH     based in Karlsruhe, GERMANY

In order to ensure that an industrial process can be controlled or even improved and optimized continually an analysis of the current situation in real time is necessary. Process data like temperature, pressure but also particle concentration and size distribution of a material flow can supply valuable information and be used for the regulation or the improvement of a process.

High performance separation system for fuel gas streams

by Pentair Filtration Solutions, LLC     based in Conroe, TEXAS (USA)

Fuel Gas Streams are frequently contaminated with liquid aerosols. The liquid exists as a stable and persistent “smoke” in the gas stream. The liquid contaminant can enter the gas stream through any one of a variety of events including – phase separation and condensation, compressor lube-oils from compression, chemical addition to pipelines (including corrosion inhibitors), and entrainment from overheads of contact towers.

Low level measurement of VOCs and Terpenes close to the sea and the Landes Forest

by Chromatotec Group     based in Val de Virvée, FRANCE

It has been established that organic aerosol (OA) makes up for a major fraction of fine particulate matter in all region of the atmosphere. This fraction accounts approximately for half of the total PM2.5 dry mass.1,2 Primary OA is directly emitted in the troposphere from anthropological and natural sources whereas secondary OA (SOA) is formed in-situ in the atmosphere from the oxidation of biogenic or anthropogenic gas-phase precursors and subsequent partitioning of the less volatile products into the particle phase. The current number is that, on a global scale, SOA would represent around 60% of the overall OA.3 However, recent global mass-balance estimations for the removal of volatile organic compounds (VOC) suggest that this number could under-predicts SOA production.4 Recent field measurements in urban locations are also in support of a larger share, indicating that SOA is the dominant fraction of OA, with amounts considerably 20 greater than models predictions.

Aerosol and particle technology for automotive industry

by Palas GmbH     based in Karlsruhe, GERMANY

Especially in the field of automotive industry the application of modern particle measuring technology is essential in the domains of quality control and development.

Aerosol and particle technology for pressure & temperature industries

by Palas GmbH     based in Karlsruhe, GERMANY

The reproducibility of the devices has been approved by worldwide use. In order to avoid the condensation or vaporization of the particles during the particle measurement, the isothermal and isobaric particle generation and measurement is necessary.

Applications and Air Pollutants Removed in for Rendering and Food by-Product Operations.

by Bionomic Industries Inc.     based in Mahwah, NEW JERSEY (USA)

Particulate and odor control on emissions from dryers, cookers, presses and other processing operations. Poultry manure dryer particulate and odor control. 

Applications and Air Pollutants Removed in the Fiberglass Industry

by Bionomic Industries Inc.     based in Mahwah, NEW JERSEY (USA)

Removal of urea and phenol formaldehyde resin and fibers from sizing dye operations, particulate and blue haze emissions from fiberglass mat ovens. Removal of styrene emissions from fiberglass composite manufacturing operations.

Odor control for rubber tyre production

by Aerox B.V.     based in Vleuten, NETHERLANDS

The production of rubber tyres consists of several processes that generate odours. These processes emit a large airflow with a typical rubber smell, which is likely to cause problems in the wide area of the factory.

Non-Standard Applications

by Procal - Parker Hannifin Corp     based in Peterborough, UNITED KINGDOM

Procal supply analysers to monitor many different applications from small combustion plants to large power stations. Examples include University Boiler Plants, Carbon Black Plants, Thermal Oxidisers and Community Heating Projects.

Aerosol Research

by Ecotech Pty Ltd     based in Knoxfield, AUSTRALIA

The Earth is warmed principally by the sun’s radiation which enters the atmosphere. However, not all the radiation penetrates the atmosphere as some is scattered back into space. The amount of back-scattering into space alters the amount of energy that is absorbed into the atmosphere. backscattering of this energy provides valuable information on the change of the earth’s radiation balance and how different activities (artificial and anthropogenic) can affect this delicately balanced system and thus influence global warming

Aerosol and particle technology for aerosol generation industry

by Palas GmbH     based in Karlsruhe, GERMANY

For more than 25 years Palas has been building systems for the aerosol generation. With more than 30 different systems Palas is market leader worldwide. In particular, the high reproducibility and constancy regarding the particle size distribution and concentration of the Palas aerosol generators have to be emphasized. The Palas aerosol generators are heatable in part up to 150°C. Several types are built in pressure-resistant version and being used successfully worldwide for applications in under and overpressure up to 10 bar.

Aerosol and particle technology for filter testing industry

by Palas GmbH     based in Karlsruhe, GERMANY

Nearly 100 test rigs for the quality assurance and the development of filters are being used worldwide with great success.

Scrubbing Systems for Chemical & Pharmaceutical Industries

by ERG (Air Pollution Control) Ltd     based in Horsham, UNITED KINGDOM

ERG`s purpose-designed scrubbing systems are engineered to suit each application and client`s requirements.

Odour nuisance assessment for agricultural facilities

by Cambridge Environmental Research Consultants (CERC)     based in Cambridge, UNITED KINGDOM

Assessment of odour impacts from agricultural facilities is increasingly required for planning and IPPC/EPR permitting.

CERC carries out odour impact assessments to investigate odour nuisance complaints, to predict the likely impact of new and existing facilities, and to evaluate the impact and cost effectiveness of various odour control strategies.

In order to carry out a robust assessment of odour impact, whether to evaluate a proposed facility or get to grips with an odour nuisance problem, it is important to establish a clear link between the operation of the plant, the resulting emissions and the odour impact.

CERC also has experience of bioaerosol dispersion modelling for composting facilities.

Air quality monitoring

by Metrohm AG     based in Herisau, SWITZERLAND

To estimate the effects of aerosols on health and climate, it is essential to know their chemical composition. Sampling is done using two different types of aerosol collector. The first type are filter collectors that are based on the deposition of suspended particles on surfaces; the second type are powerful aerosol collectors.

PTR-TOFMS systems for Flux Measurement of BVOCs

by Ionicon Analytik Ges.m.b.H.     based in Innsbruck, AUSTRIA

The ultra-fast analysis capabilities of IONICON PTR-TOF instruments are essential for eddy covariance flux measurements, allowing to study deposition and emission rates of biogenic volatile organic compounds (BVOCs).

Oil Mist Seperator for Building Construction

by contec GmbH Industrieausrüstungen     based in Bad Honnef, GERMANY

Contec oil mist separators ensures the façade design of ETFE cushions for efficient and environmentally friendly glare-, heat- and UV-protection. Contec GmbH, Bad Honnef is a leading manufacturer of filtration systems, oil mist separators and liquid level measuring technology. The use of the Contec oil mist separator (COMS) in the field of building construction is definitely very innovative and our system has proven again its advantages in environmental aspects.

Need help finding the right suppliers?

Let the XPRTs do the work for you