Equipment

157307 Results found
Only show results in Virginia?
OK

RainWise - Model SM - Soil Moisture Sensor

by RainWise Inc.     based in Trenton, MAINE (USA)

This sensor responds to changes in soil moisture. Once placed in soil, it exchanges water with the surrounding soil, staying in equilibrium with it. As the soil dries, water is removed from the sensor and the resistance measurement increases. When soil gets wet, the resistance lowers. This is due to the fact that soil water is an electrical ...


Cerex - Model UV Sentry - Open-Path Air-Monitoring System

by Cerex Monitoring Solutions, LLC.     based in Atlanta, GEORGIA (US) (USA)

The Cerex UV Sentry Open Path Multi-gas Analyzer sets the industry standard for time-resolved, gap-less fugitive emissions and chemical emergency monitoring across fencelines, around process units and around tank farms.


KONCAR - Model ST&P - Shaft Torque and Power Monitoring System

by KONCAR - Electrical Engineering Institute Inc.     based in Zagreb, CROATIA

Torque, speed and power are the defining mechanical parameters associated with functional performance of rotating machines (machine efficiency determination). ST&P system enables insight into this important machine parameters by on line measurement of shaft twist angle. The system uses two precise optical fork sensors


CONESEP - Automated Process For External Regeneration Of Ion Exchange

by Ovivo (Formerly Eimco Water Technologies)     based in Salt Lake City, UTAH (USA)

The CONESEP system is a fully automated process for external regeneration of ion exchange resin, used in deep bed ion exchange condensate polishing. The process achieves superior resin separation to conventional external regeneration systems without operator intervention, which is the key to the highest quality condensate and permits extended runs ...


TiPPS - Model DAF - Dissolved Air Flotation System

by MPP & TiPSS Technologies – Veolia Water Technologies     based in Ede, NETHERLANDS

The VWS MPP Systems TiPPS DAF (Dissolved Air Flotation) system has unique design that contains a plate pack section for enhanced efficiency and reduced footprint requirements and a pneumatic scraper system that optimizes the thickening of the float layer.


Vulcan - Model R-106B - Tipping Refuse Body Scale System Without Mounting Brackets

by Vulcan On-Board Scales     based in Kent, WASHINGTON (USA)

The Vulcan tipping refuse body scale system with mounting brackets is designed to work with all refuse bodies that tip to dump. It can also be modified for units that tip only for service. The scale system measures gross vehicle, net payload and individual commercial pick-up weights.


Model TD-4100 XD - Continuous On-Line Oil in Water Monitor

by Turner Designs Hydrocarbon Instruments, Inc.     based in Fresno, CALIFORNIA (USA)

The TD-4100 XD is a ruggedized version of the TD-4100 continuous on-line oil in water monitor. The XD is designed specifically for offshore oil production, refining, petro-chemical, mining, and other industries that require robust on-line hardware for severe duty and hazardous area locations. The monitor is skid or wall mounted and constructed of ...


TAPI - Model 465M - Process Ozone Monitor

by Teledyne Advanced Pollution Instrumentation (TAPI)     based in San Diego, CALIFORNIA (USA)

The Model 465M is a microprocessor based medium range ozone monitor for measuring process ozone concentrations in water treatment, food processing, and research applications. The design has been specifically optimized for applications requiring the measurement of ozone at near-ambient pressure such as water treatment contactor off-gas measurement. ...


Chroma CO - Model C11022 - Gas Analyser

by Chromatotec Group     based in Val de Virvée, FRANCE

A gas analyser using flame detection with a catalytic methanator module to analyse CO and CO2 for monitoring gas purity and electronic gas measurement. A 19' inch rack mountable chassis, 4U high. It has the ability to be used as a fully integrated system for automatic sample analysis as well as it is transportable for use at various sites. Our ...


Newman Zone - Electron Donor for Enhancing the In Situ Anaerobic Bioremediation

by RNAS Remediation Products     based in Brooklyn Center, MINNESOTA (USA)

Newman Zone® was the first EVO bioremediation product on the market and tens of millions of pounds have been successfully used around the world. Newman Zone® is a blend of fast and slow release electron donors proven effective in treating chlorinated solvents and other contaminants.


iToxcontrol - Integrated On-line Wastewater Toxicity Monitor

by microLAN On-line Biomonitoring Systems     based in Waalwijk, NETHERLANDS

Automatic waste water toxicity monitoring with the iTOXcontrol helps to control your process.


Teledyne RD Instruments - Workhorse Rio Grande ADCP

by Teledyne RD Instruments     based in Poway, CALIFORNIA (USA)

The WORKHORSE RIO GRANDE ADCP (Acoustic Doppler Current Profiler) is an accurate, rapid-sampling current profiling system designed to operate from a moving boat. The result is the fastest, safest, and most flexible method for measuring discharge.


TenCate Geotube - Containment Berms for Mining and Mineral Processing

by TenCate - Geotube     based in Commerce, GEORGIA (US) (USA)

TenCate Geotube industrial fabrics deliver solutions for mining and mineral processing. From our complete product line for the dewatering market, we offer materials that are ideal for handling dewatering and containment in one operation. Mine tailings, coal sludge, and other materials can be managed and handled cost-effectively with TenCate ...


Ready - Tank Containment Berm

by Ready Containment, LLC     based in Palmetto, FLORIDA (USA)

This unique berm design allows for the Secondary Containment of large amounts of liquid such as chemicals or fuels. While extended wall height allows for reduced footprint compared to traditional spill berms. The Ready Tank containment Berm can be designed for both portable/temporary uses as well as a permanent spill containment solution.


Shand & Jurs - Model 94210 - Emergency Vent & Manhole Cover (Hinged) for Biogas Digesters

by Shand & Jurs (L&J Technologies & L&J Engineering)     based in Hillside, ILLINOIS (USA)

The Shand & Jurs Model 94210 Emergency Vent and Manhole Cover is an economical solution to emergency venting requirements where intermediate pressure settings are required.


Gasmet - In-Situ Multicomponent FTIR Gas Analyser

by Gasmet Technologies Oy     based in Helsinki, FINLAND

The In-Situ analyzer consists of a sample cell inserted into the stack or duct, heated steel mounting flange and the rugged GICCOR interferometer unit in an IP65 enclosure that is directly attached to the flange.


Systech - Model MM400 - Moisture Analyzer

by Systech Instruments Ltd     based in Thame, UNITED KINGDOM

Advanced technologies in process gas measurement for maintenance-free moisture analysis. The MM400 moisture / dew point hygrometers are designed to be customised to your application giving precise measurements while providing a simple, yet affordable analyzer.


Anguil - Emission Concentrator with Integrated Oxidizer

by Anguil Environmental Systems, Inc.     based in Milwaukee, WISCONSIN (USA)

Typical air pollution control projects focus on the capture mechanism and a destruction device. With regulations driving towards higher capture efficiencies, combustion devices must treat larger volumes of air with lower concentration of pollutants. The Anguil rotor concentrator is an adsorption system designed to concentrate large volume, low ...


Hydrolab DS5/DS5X - Multiparameter Sonde

by Stevens Water Monitoring Systems, Inc.     based in Portland, OREGON (USA)

For maximum capability and flexibility, the DS multisondes offer the choice of any of Hydrolab’s 17 sensor options on a multiprobe designed for either profiling or unattended monitoring. Each features seven built-in expansion ports, and can measure up to 15 water quality parameters simultaneously.


MCM-IntelliProbe-U10T - Voltage Monitoring Module

by Smart Testsolutions GmbH     based in Stuttgart, GERMANY

Ultra-compact 10-channel voltage measurement module with integrated bus termination and direct-mount attachment for a galvanically isolated voltage logging in groups of battery, fuel cell or electrolysis stacks with the following technical specification (excerpt): - Dimensions (WxHxL mm) 10.5 x 30 x 100 without guiding pins and bus connectors. - ...

Need help finding the right suppliers?

Let the XPRTs do the work for you