Only show results in Texas? Ok

Air Contaminant Applications

  • Premium

    Waste water treatment plants Air quality control by TRS MEDOR Online Odor Monitoring

    ontext & Challenges Globally, the wastewater treatment is the first public health issue. Urban development leads to urbanization near waste water treatment plant and extension of sewerage network. These aspects induce to an augmentation of sulfur compounds (H2S, mercaptans and sulfides) which are very corrosive, odorant and toxic. To monitor this compounds online CHROMATOTEC® offers high meteorological solutions. Odors are very distinct air contaminants as they generate nuisances. The factors playing a...

    By Chromatotec Group based in Val de Virvée, FRANCE.

  • Premium

    Building solutions for the cement manufacturing sector

    Cement manufacturing has an impact on the environment at every stage of the manufacturing process. Airborne pollutants are released in the form of dust, gases, noise, and vibration when operating machinery and during blasting in quarries. Technologies to reduce dust emissions during the quarrying and manufacture of cement are widely used, as are technologies to trap and separate exhaust gases.

    By CECO Environmental based in Dallas, TEXAS (USA).

  • Premium

    Tunnel solutions for the extractive areas

    In some countries they do not allow tunnel atmosphere monitors to be mounted on the tunnel wall; also, where there is a single bore it is very difficult to gain access for maintenance purposes. The TunnelTech 400 series are extractive gaseous pollutant and visibility monitors and extract a gas and dust sample from the tunnel bore and carry to a remote analyser. This allows maintenance to take place without affecting tunnel traffic flow.

    By Codel International Ltd based in Bakewell, UNITED KINGDOM.

  • Premium

    Tunnel solutions for the gaseous pollutants

    The TunnelTech 200 series are primarily gas monitors with optional Visibility capability. Most use Infra-red absorption technology to monitor gaseous pollutants and those with a visibility channel use optical attenuation for that application. All TunnelTech 200 analysers except the TunnelTech 205 use the same rugged corrosion resistant enclosures and have an optional Data Display unit. As there is only one moving part so reliability levels are very high and maintenance levels very low.

    By Codel International Ltd based in Bakewell, UNITED KINGDOM.

  • Premium

    Industrial air pollution control for the metals and mining

    Since mankind`s early beginnings, mining, metallurgy and the subsequent processing of natural resources have evolved into one of the most significant industries. Known as `heavy-industry`, this branch plays an important economic role in most countries. The scope of applications for CTP systems ranges from the mining of natural resources (e.g. bauxite and gold-ore mining), through the production of acetylene gas from coal and calcium carbonate, to the aluminium and steel industry and their foundries.

  • Premium

    Machine condition monitoring for food and beverage

    Manufacturers of food and beverages typically have a high volume of product passing through their facilities at all times. For this reason, any unexpected downtime can be very costly in terms of lost production. In addition, many food and beverage facilities have difficult challenges associated with lubricant contamination.

    By Spectro Scientific based in Chelmsford, MASSACHUSETTS (USA).

  • Premium

    Thermal waste gas purification of siliceous organic compounds

    Example: Electrical industry. Similar tasks: Electronic industry, Coating, Waste management.

  • Premium

    Engineered clean air flexibility solutions for alternative energy applications

    Environmental control is easier said than done when you’re manufacturing alternative energy solutions. Humidity, temperature fluctuations, and dust can corrode your copper solar panel or battery components. Metal finishing, coating, or painting containment is a daunting task when working with behemoth turbine bases and blades. But, how do you isolate your critical processes in a controlled clean air environment without breaking your material handling budget? The answer is a flexible indoor air filtration...

    By Duroair Technologies Inc. based in Niagara Falls, ONTARIO (CANADA).

  • Premium

    Engineered clean air solutions for lean manufacturing applications

    Whether you call it lean manufacturing or Just-in-Time (JIT) manufacturing, eliminating waste isn’t a new concept for bottom-line minded manufacturers. But, it isn’t easy to reduce operating costs while creating more value for your customers. This is especially the case for welding, sanding, painting, or other processes that produce harmful air contaminants and create production bottlenecks for larger construction projects. What if you had a portable, clean air solution to protect your employees from...

    By Duroair Technologies Inc. based in Niagara Falls, ONTARIO (CANADA).

  • Premium

    Engineered clean air solutions for marine applications

    You already know there’s no such thing as simple one-piece flow when it comes to boat building and repair. Larger pieces must be built in place and smaller subsystems, pipelines, and foundations are usually brought to the site. For smaller crafts, hulls and decks must be moved between workstations, usually via overhead cranes.

    By Duroair Technologies Inc. based in Niagara Falls, ONTARIO (CANADA).

  • Premium

    Engineered clean air solutions for metal fabrication applications

    Whether you’re cutting, welding, coating, grinding, or sanding, every metal fabrication task produces dust and fumes that can threaten your employees’ safety, derail productivity, increase maintenance costs, and place you in directly in the EPA’s crosshairs. Oil mist and dust particles can settle into every crack and crevice of your machinery, electronics, and cooling fans, eventually causing equipment failure and downtime. Who has the time and resources to redesign an entire facility around a...

    By Duroair Technologies Inc. based in Niagara Falls, ONTARIO (CANADA).

  • Premium

    Engineered clean air solutions for transportation applications

    From alternating between initial paint sprays and repairs with finishing and coating applications, you’re too busy to worry if your shop floor air is OSHA or EPA compliant. You want to protect your employees against sanding dust and spray fumes, but facility-wide HVAC systems can suck the air out of your bottom line. What if you had a cost-effective, clean air solution that could protect your employees from airborne hazards and even speed up drying times for a more efficient work flow?

    By Duroair Technologies Inc. based in Niagara Falls, ONTARIO (CANADA).

  • Premium

    Gas analysis solutions for medical & pharmaceutical industry

    Applications within the medical and pharmaceutical industry are vast with gases being delivered directly to patients for therapy (e.g. ventilators or anaesthesia) or used for storage, cryogenic freezing or incubation. Pharmaceutical companies use gases in the manufacturing process of many products and ingredients. Additionally analysis takes place in physiology laboratories, for example, to measure oxygen depletion levels in humans with the use of a Douglas bag.

    By Cambridge Sensotec Limited based in St. Ives, UNITED KINGDOM.

  • Premium

    Activated carbons solutions for automotive industry

    In today’s competitive market, vehicle manufacturers face a variety of challenges with respect to the capture of organic compounds. Increasingly stringent emissions regulations require efficient removal of volatile organic compounds (VOCs) from the vehicle, mileage standards impact the size and weight of vehicles (thus impacting the design of air filters used in the vehicle), and consumers continue to demand improved driving experiences (driven in part by air quality within the vehicle cabin). Auto makers...

    By Jacobi Group based in Kalmar, SWEDEN.

  • Premium

    Coriolis Air Sampler for Food/Pharma/Veterinary Industry

    Coriolis air sampler collects biological particles in the air for air quality control and monitoring in an industrial process

    By Bertin Instruments based in Montigny-le-Bretonneux, FRANCE.

  • Premium

    Spectrometric Monitoring for Air and Water

    Spectrometric monitoring offers a continuous operating measurement system for nuclide specific detection of low level gamma contamination in air and in liquids.

    By Bertin Instruments based in Montigny-le-Bretonneux, FRANCE.

  • Premium

    Coriolis Air Sampler for Biomedical & Health

    Coriolis air sampler collects biological particles in the air for biocontamination control in a biomedical and health environment

    By Bertin Instruments based in Montigny-le-Bretonneux, FRANCE.

  • Premium

    Emissions Monitoring for Airports

    Opsis systems provide high-performance monitoring of the emission activities within an airport. The rapid system allows on-line monitoring of the emissions from each aircraft at take-offs and landings, monitoring of fugitive emissions from stationary sources and differing of the airport sources from the surrounding pollution sources.

    By Opsis AB based in Furulund, SWEDEN.

  • Premium

    Vacuum technology solutions for pulp & paper industry

    The treatment of raw material, the supply of local energy, and the core production process in the pulp and paper industry means a wide range of wet and dry applications for DISAB vacuum system solutions in the pursuit of reduced downtime, improved quality, and the recycling of valuable material.

    By Disab Vacuum Technology based in ESLÖV, SWEDEN.

  • Premium

    Activated carbons solutions for personal protection industry

    The Challenge: Manufacturers of personal protection devices are driven to safeguard the public health caused by airborne chemical contaminants. Removal of these contaminants is technically demanding, and manufacturers must meet this technical challenge while navigating stringent regulations. Jacobi’s understands this unique blend of technical and regulatory challenges for personal protection devices faced by our customers. Jacobi provides many different formats of product that are used in different aspect...

    By Jacobi Group based in Kalmar, SWEDEN.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you