Air Treatment Articles

  • Avondale Foods effluent treatment - Case Study

    Introduction Avondale Foods (Craigavon) Ltd. is one of the UK's leading manufacturers and suppliers of coleslaw, wet salads, side salads, vegetable accompaniments, soups, sauces and mayonnaise to retail and foodservice customers throughout Britain and Ireland. The company has a team of over 380 people working in its state-of-the-art facility, with all products being manufactured on the ...


    By Water Tecnik Ltd.

  • Horizontal Well Rehabilitation at NASA Facility

    A horizontal groundwater extraction well at an active NASA facility in Louisiana was impacted by mineral scaling and bio-fouling affecting operations of the groundwater pump and the treatment system. A flow reduction of over 50% was observed. Directional Technologies, Inc. performed a series of horizontal well rehabilitation activities, that increases flow by 58%, which including mechanical ...

  • The design and build of a process and wastewater treatment plant - Wastewater inlet COD: 3000 mg/l - Case Study

    The client Our Client has been on the market since about 50 years and is one of the most important protagonists of the Italian dairy industry. The business of this Group consists of 4 main areas: milk and cream, yogurt, cheese and “diversification”, which includes industrial gastronomic specialities, eggs and desserts. Milk still remains his primary activity, even if, with the ...


    By IDRAFLOT

  • Raw water clarification by flotation with microbubbles and nanobubbles generated with a multiphase pump

    Raw water clarification by flotation was studied by injecting air into a centrifugal multiphase pump to generate microbubbles (MBs) and nanobubbles (NBs). Measurements of gas dispersion parameters were performed and optimal conditions were obtained using a pump pressure of 4 bar. Values showed a bubble Sauter diameter of 75 μm, an air holdup of 1.2%, a bubble surface area flux of 34 s−1 and an ...


    By IWA Publishing

  • Used Furnaces & Ovens

    Industrial ovens and furnaces are both heated chambers used to process raw materials at higher temperatures than what can be obtained in open-air systems. There is a range of heat treatments possible with both industrial furnaces and ovens, and the main purpose of any heat treatment is to change the mechanical of physical properties of a material. Some examples of materials that benefit from heat ...


    By Thermcraft Inc

  • Treatment and Disposal of Air Pollution Control Residue

    What is APCr? Thermal waste management using Energy Recovery Facilities (ERFs) is now a well-managed and mature technology that is subject to environmental monitoring by a range of competent international bodies. These ERFs have been established as a means of diverting waste away from landfill disposal and for valorising the material and energy content of the waste. Counter to historic ...

  • Ballast water treatment on Alaskan coastline - Case Study

    An Alaskan oil terminal had to deal with contaminated ballast water that needed to be collected and treated before discharge. They had a biological treatment process on site, but it was difficult to operate in the temperature and contaminant loading extremes the site experiences and they struggled to get it to work consistently. The plant is also required to treat spring snowmelt and rain that ...


    By QED Environmental Systems

  • Using Air Strippers for Off-gas Treatment - Case Study

    Two pharmaceutical plants in Puerto Rico used large sequencing batch reactor (SBR) systems to treat their wastewater. The primary treatment was an aerobic bio breakdown of the waste. The were forced to change their treament process because of change in treatment regulations. The new regulations required them to treat off-gas that was coming from the SBRs. They were faced with installing a very ...


    By QED Environmental Systems

  • Case study - MBT Wrexham

    Planning, delivery, installation, commissioning, testing and turnkey delivery of a plant for mechanical-biological treatment of municipal waste. Customer: FCC Environment Throughput: (50,000 Mg/a): 33,500 Mg/a Household waste and 16,500 Mg/a Commercial waste Commissioning: March/April 2015 ...


    By Eggersmann Anlagenbau

  • Case study - RDF plant Tel Aviv

    Engineering and planning, procurement, production and delivery of the complete plant engineering as well as installation and commissioning. Retention: September 2012 Throughput: 540,000 Mg/a Operational time: at least 6,200 Mg/a Input: municipal solid waste, commercial and industrial ...


    By Eggersmann Anlagenbau

  • Case study - CAIROX CR potassium permanganate tablets

    PROBLEM Hydrogen sulfide (H2S) results from septic conditions during the collection and treatment of wastewater. H2S has long been recognized as a major problem for municipal wastewater systems. This colorless gas, known for its rotten egg smell, is produced by the biological reduction of sulfates and the decomposition of organic material. It forms at virtually every point in a system ...


    By Carus Corporation

  • Case study - City of Montreal upgrade of Atwater and Des Baillets water treatment plants

    Sidestream Venturi Injection—Basin Nozzle Manifold Contacting System. Montreal, Quebec, Canada The Problem: In 2001, a water quality audit revealed that two of the largest drinking water plants in the City of Montreal were out of compliance with Quebec’s latest water quality rules. In response to the audit, the city upgraded the 1,400 MLD Atwater and the ...

  • How to Choose the Best Wastewater Treatment System for Your Plant

    For industrial companies producing wastewater as a byproduct of their process, some type of wastewater treatment system is usually necessary. Failing to properly treat your wastewater can potentially harm the environment, human health, and your process, in addition to causing your facility to incur heavy fines and possible legal action if it is being improperly discharged into a publicly owned ...


    By SAMCO Technologies, Inc.

  • Determining Proper Cooling Tower Size

    To maximize water-based cooling tower benefits, the appropriate tower size must be selected, requiring the identification of several critical factors. Cooling towers are a relatively inexpensive and reliable way of expelling heat from a number of industrial processes, including nuclear & thermal power plants, petroleum refineries, petrochemical plants, food processing plants, as well as HVAC ...


    By Delta Cooling Towers, Inc

  • Innovative portable package wastewater treatment plants - Case study

    DEVISE ENGINEERING S.A. has designed, engineered and is currently producing a new series of State of the Art Portable Sewage Treatment Plants (PSTP), incorporating advanced Ultra-Filtration (MBR) technology. These Plants are used for multiple “emergency” & “short-term” purposes with the ability to re-use the treated effluent. The particular Portable STP can be easily ...


    By DEVISE ENGINEERING S.A.

  • Repair, retrofit, and rebuild services for amine treating acid gas process - Case Study

    Catalytic Products International (CPI) was recently engaged by a Western Colorado Gas Processing Facility to review the existing amine treating acid gas process and the air pollution control equipment installed in an effort to help optimize the units and make improvements to the reliability of the entire system. Introduction: Identify root cause of numerous failures and create an ...

  • Customers Who Identified Delta Cooling Towers as the Solution Hollywood Seminole Water Treatment - Case Study

    Our Delta High Air Stripping Towers used to treat potable water at the Hollywood Seminole Water Treatment Plant in Hollywood, FL can be seen in the background in the April 2016 Issue of Treatment Plant Operator (TPO) Magazine. Click here for the whole article. Woodruff Arts Center ...


    By Delta Cooling Towers, Inc

  • Strategies for the reduction of Legionella in biological treatment systems

    A community-wide outbreak of Legionnaire's disease occurred in Warstein, Germany, in August 2013. The epidemic strain, Legionella pneumophila Serogruppe 1, was isolated from an industrial wastewater stream entering the municipal wastewater treatment plant (WWTP) in Wartein, the WWTP itself, the river Wäster and air/water samples from an industrial cooling system 3 km downstream of the WWTP. ...


    By IWA Publishing

  • Pd/RGO modified carbon felt cathode for electro-Fenton removing of EDTA-Ni

    Ethylenediaminetetraacetic acid (EDTA) forms stable complexes with toxic metals such as nickel due to its strong chelation. The electro-Fenton (EF) process using a cathode made from palladium (Pd), reduced graphene oxide (RGO) and carbon felt, fed with air, exhibited high activities and stability for the removal of 10 mg L−1 EDTA-Ni solution. Pd/RGO catalyst was prepared by one-pot synthesis; ...


    By IWA Publishing

  • Case study - Wastewater treatment plant - ROPEC - deodorization plan project

    Bioconservacion has recently been awarded the supply of high capacity odor elimination media for two deodorization systems in a waste water treatment plant (WWTP) located in the Canadian capital of Ottawa. The Robert O. Pickard Environmental ...


    By Bioconservacion SA

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you