Only show results in USA? Ok

Baghouse Air Filtration Applications

  • Premium

    Temperature measurement and control devices for non-ferrous metals industry

    TTEC thermocouples are used in various Non-Ferrous Metals Industries to accurately measure high temperatures under harsh conditions. TTEC Series 2000 Industrial Assemblies are used to measure molten metal temperatures in smelting applications. TTEC Series 1000 TECPAK thermocouples are used in large processing facilities to provide accurate Furnace Temperatures. The TTEC # 10-3633 custom Thermocouple with ¼" NPT process thread is utilized for Reclaimer Temperatures in the Aluminum Industry.

    By Thermocouple Technology, LLC (TTEC) based in Quakertown, PENNSYLVANIA (USA).

  • Premium

    Environmental solutions for the metals and mining industry

    Dürr Megtec provides custom-designed gas cleaning solutions for the metallurgical industry. Gas cleaning for acid plants, furnaces and converters: Wet electrostatic precipitators for collecting fine particulate and sulfuric acid mists from SO2-rich gas streams. Wet and dry electrostatic precipitators for reduction of particulate from furnace and converter gas streams. Acid gas control with wet absorbers.

    By Dürr MEGTEC, LLC based in De Pere, WISCONSIN (USA).

  • Premium

    Environmental solutions for the flue gas temperature control

    Evaporative gas cooling and conditioning systems help protect your downstream equipment, enhance air pollution control performance, reduce gas volumes, and increase production capacity. Central to our systems are Turbotak atomizing nozzles, which introduce a controlled amount of finely atomized water into the hot gas stream to reduce and/or maintain gas temperature. The water evaporates, while absorbing heat from the gases, for free-flowing dust, zero liquid discharge, and minimal or no wall buildup.

    By Dürr MEGTEC, LLC based in De Pere, WISCONSIN (USA).

  • Premium

    Industrial monitoring solutions for the dust collectors areas

    Most industrial processes have dust collectors of some form or other, the most popular being filter bag houses. Very few of these are covered by regulation other than to have a broken bag detector to prevent nuisance dusts escaping and creating a local nuisance. The CODEL StakGard is a low cost Tribo-electric monitor that directly measures mass particulate concentration by sensing the frictional charge created when particles collide with a conductor. The advanced electronics of the StakGard detect this signal and...

    By Codel International Ltd based in Bakewell, UNITED KINGDOM.

  • Automotive Shredder Residue Drying

    Getting economic value from landfill waste like automotive shredder residue (ASR) is a big challenge that can have a big payoff. Vulcan® Systems Drying Technology is the key component of material preparation when separating ASR waste to reclaim energy and metals. Vulcan® ASR Dryer Systems are manufactured to suit each client’s individual project needs and custom-designed specifically to dry ASR, making the material easy to transport, separate, and handle. This drying system consists of a drum with a burner that...

    By Vulcan Drying Systems based in Moberly, MISSOURI (USA).

  • Demister manufacturer

    Global supplier and manufacturer of Separation Technologies, Process equipment, Mass Transfer and Filtration systems.

    By Euromesh BV based in Sliedrecht, NETHERLANDS.

  • Still Mill Furnace Dust Filtration

    Steel Plant Blast Furnace Filter Nomex Filter Bags ,Aramind Needle Felt Aramid Filter Bag.

    By Zhejiang Grace Envirotech based in Xiaoshan, CHINA.

  • Water treatment solutions for the construction waters industry

    Construction site stormwater run-off, groundwater and dewatering water. Passive and active treatment systems.

    By Dungeness Environmental Solutions, Inc. (DESI) based in Everett, WASHINGTON (USA).

  • Knockers, Vibrators and Rappers for Dust Collectors

    The Cleveland Vibrator Company offers a wide range of pneumatic, piston-driven, industrial vibrators, knockers, impactors and rappers to dislodge collected dust from precipitator wires and plates or baghouse filter bags as well as keep dust free flowing in collection bins and hoppers.

    By Cleveland Vibrator Company based in Cleveland, OHIO (USA).

  • Industrial Meshes For Hot Gas Filtration

    The SolidWEAVE stainless steel filters from GKD have for decades been in use in a variety of applications for hot gas filtration. Knowledge of the specific requirements for the filtration of hot gases and continuous optimization and further development result in the high quality of our filter meshes.

    By GKD - Gebr. Kufferath AG based in Düren, GERMANY.

  • Waste Management Solutions for Metal Manufacturing Industry

    There are several challenges faced by the metal manufacturing industry. Firstly, there is a drive to recover as much metal credit as possible before disposal of by-products as wastes. Secondly, there is a requirement to minimise waste generation or alternatively minimise the costs of managing the disposal of any hazardous waste material generated during the manufacturing process. Finally, keeping the company competitive by generating value or by reducing costs in the manufacturing process. Any solutions that can...

    By Tetronics (International) Limited based in Swindon, UNITED KINGDOM.

  • Nomex filter bags for asphalt mixing site dust filtration

    Nomex filter bag for higher temperature dust filtration ,widely applied in Asphalt mixing plant ,Kiln smoke in cement plant ,steel plant blast furnace smoke and so on. NOMEX filters offer one of the best total economies in a filtrationsystem because of higher air to cloth ratios, higher temperaturecapability, and a long wear life.

    By Zhejiang Grace Envirotech based in Xiaoshan, CHINA.

  • Industrial Solution for food

    Macrotek has designed and supplied systems for many different applications in the food sector including sugar, starch, corn, sugar cane and rendering. A common challenge in many of these industries is the collection and treatment of explosive dust. Baghouses were the primary technology for particulate clean up, however, recent major incidents and explosions in these industries, particularly sugar handling, have resulted in a review and change in dust system collection design and strategy. Macrotek is an experienced...

    By Macrotek Inc. based in Markham, ONTARIO (CANADA).

  • Waste Management Solutions for Metal Refining

    Metal refining is increasingly seen as an essential part of natural resource conservation As sources of primary metals become scarcer or harder to excavate, the only viable solution is to extract and recycle secondary source of material already in circulation in a number of mass produced consumer products across the globe. The challenge is finding a technology that can efficiently recover these valuable metals from their less valuable materials. Tetronics can assist with a range of metal refining challenges,...

    By Tetronics (International) Limited based in Swindon, UNITED KINGDOM.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you