Only show results available in Virginia? Ok

Calibration Gas Services

  • Audit, Maintenance And Calibration Of Gas Sampling Equipment Services

    Consulair offers audit, maintenance and calibration services for gas analysers, high volume samplers and mass particle analysers such as the TEOM 1400A, Partisol and Dichotomous.

    By Consulair based in Quebec, QUEBEC (CANADA).

  • Continuous Emission Monitoring

    AirNova, Inc. operates several Mobile Continuous Emission Monitoring (CEM) Laboratories providing on-site, real-time analysis for both source emission and ambient test programs. To ensure data quality and optimize data capture, these laboratories offer a wide variety of instrumentation housed in a controlled environment. In line with these ...

    By AirNova, Inc. based in Pennsauken, NEW JERSEY (USA).

  • calibration gas - calibration gas

    calibration gas

    By AG Gases Ltd based in Stoke-on-Trent, UNITED KINGDOM.

  • Calibration

    We offer a full line of calibration services in our laboratory, as well as in-field calibrations. Our capabilities include calibration gas cylinders, NIST traceable gas generation and full service field calibration.

    By DOD Technologies Inc based in Cary, ILLINOIS (USA).

  • Air and Gas Flow Calibration Services

    Young Calibration is a leading supplier of and air and gas flow calibration services to the automotive, medical, environmetal and process instrumentation industries. Recognising the high quality performance our customers require; a continual program of expansion directs our way ahead.

    By Young Calibration Ltd based in Shoreham by Sea, UNITED KINGDOM. from Calibration Services Service line

  • Repair & Calibration Services

    Hy-Ram Engineering Co. Ltd. provide a specialist quality repair service for a range of Water and Gas and other associated industries equipment. We have repaired such equipment for over 30 years…  our team of experienced engineers, coupled with our production team adhere to strict process and test procedures in accordance with our ...

    By Hy-Ram Engineering Co. Ltd. based in Mansfield, UNITED KINGDOM.

  • Gas Flow Calibration & Test Facility

    D-Flow has access to excellent calibration facilities at Luleå University of Technology. The air calibration and test facility has a flow range from 1 to 90 000 l/h with ± 0.15% accuracy. The facility is fully automated for long-term and repeated test cycles. The air flow calibration and test facility makes it possible for us to ...

    By D-Flow Technology AB based in LuleƄ, SWEDEN.

  • Check of Calibration/ Re-Calibration at Site / in Ulm

    In general, gas flow meter of the COMBIMASS series are not subjected to wear and tear. It can be useful under some circumstances (e.g. installation in corrosive/abrasive gas media) or if the nature of the project requires from time to time some check (e.g. CDM, high requirements on accuracy, etc), calibration of the flow sensors can be checked ...

    By BINDERGROUP AG based in Ulm, GERMANY.

  • UKAS Calibration Services

    Chell’s BS/EN/ISO/IEC 17025 accredited Calibration Laboratory provides a comprehensive service for Vacuum, pneumatic Pressure and Gas Flow measuring, controlling and generating instrumentation. Our calibration standards have been developed to provide a service having some of the lowest uncertainties in their fields, providing our customers ...

    By Chell Instruments Ltd. based in North Walsham, UNITED KINGDOM.

  • Personal Gas Detectors Calibration & Service

    Calibration and Service of your personal gas monitors and detectors is a key activity to ensure your units comply with legislation and regulations. Manufacturers of Gas monitors recommend that these meters are calibrated every 6 months to ensure the integrity of the sensors and confirm that the personal gas detector will alarm in the event of a ...

    By Point Safety Ltd based in UNITED KINGDOM.

  • Flow Meter Calibration Services

    SmartmeasurementTM is happy to announce that we have improved our flow calibration services.  We can provide fully-accredited flow meter calibration traceable to National Institute and Technology (NIST) for our own manufactured liquid and/or gas flow meters as well as other flow manufacturers.  Periodic recalibrations are often need to ...

    By SmartMeasurement based in Wauwatosa, WISCONSIN (USA).

  • Cylinder Gas Management Services

    Under the CEMS Maintenance Service Plan AMP-Cherokee personnel will provide all calibration and maintenance gases required for continuous operation of the CEMS, as well as quarterly CGAs and annual RATAs.

    By AMP-Cherokee based in Angier, NORTH CAROLINA (USA).

  • MCS Technical Services, Calibrations and Repairs

    MCS has over 45 years of experience installing, testing, calibrating and repairing liquid, gas and steam measurement products for Industrial customers. Our Technical Services staff is highly skilled, professionally trained and dedicated to providing exceptional service with an unparalleled commitment to quality and customer satisfaction.

    By Measurement Control Systems (MCS) based in Santa Ana, CALIFORNIA (USA).

  • Blend Tolerance

    Blend tolerances are affected by a number of factors including: Blending Method: Although most manufacturers utilize a combination of partial pressure and gravimetric filling, Liquid Technology uses solely gravimetric blending to manufacture all calibration gas standards. This allows us to offer tighter blend tolerances on all gas mixtures ...

    By Liquid Technology Corporation based in Apopka, FLORIDA (USA).

  • Waste Energy Services

    Currently involved in a two year emission measurement contract (2003-2004) for two mass burn facilities providing annual compliance testing including mercury, multiple metals, PCDD/PCDF, hydrochloric acid (inlet/outlet), total suspended particulate matter, particulate matter less than 10 microns (PM10), CEMS RATA, and quarterly cylinder gas audits ...

    By Gammie Air Monitoring LLC based in West Simsbury, CONNECTICUT (USA). from Industry Services Service line

  • CEMS Services

    The Air Compliance Testing team of professionals includes staff specializing in CEMS Certification Testing. They have worked on hundreds of CEMS-related projects. Our extensive field experience performing Relative Accuracy Test Audits (RATA) provides the insight necessary to understand the complexities associated with these sometimes cantankerous ...

    By Air Compliance Testing, Inc. based in Cleveland, OHIO (USA).

  • Repair & Calibration Services

    At MKS we understand that establishing a consistent regular calibration program for your gas pressure and flow instrument is critical to ensuring repeatable processes within a tool, between tools in the same facility, between tools in duplicate facilities, and when transferring processes from R&D to production. Ensuring instrument calibrations ...

    By MKS Instruments, Inc. based in Andover, MASSACHUSETTS (USA).

  • Flow Dynamics - Flow Meter Calibration Services

    Among the world’s elite flow calibration facilities, the Badger Meter Flow Dynamics primary and secondary standard calibration laboratories, located in Scottsdale, AZ, calibrate most flow meters from any manufacturer. The Flow Dynamics primary standard calibration facility offers superior liquid and gas calibration uncertainties, as ...

    By Badger Meter, Inc. based in Milwaukee, WISCONSIN (USA).

  • Thoron Calibration Services

    The RAD7 is able to measure both radon (222-Rn) and thoron (220-Rn) concentrations simultaneously and independently. The standard radon calibration is performed with a precision of better than 1% and we guarantee the RAD7 absolute accuracy for radon to be better than 5%. However thoron has a very short half life (about one minute) so that the ...

    By Durridge Company, Inc. based in Billerica, MASSACHUSETTS (USA).

  • Premium

    Spare Parts Services

    LANDTEC provides various spare part products for the GEM2000 instrument. Among those products we have: Calibration Gas Kit, Heated Soft Case, Lens Protector, Pressure Relief Valves, an others.

    By QED Environmental Systems based in Dexter, MICHIGAN (USA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you