Only show results available in Virginia? Ok

Carbon Emissions Applications

  • Premium

    Air pollution control for the composite & carbon fiber industry

    Anguil is intimately familiar with emission capture, control and compliance hurdles that composite and carbon fiber producers face. We specifically address the needs of our carbon fiber customers with proprietary oxidizer designs for furnace and oven emissions. Our systems are recognized for energy efficient operation and destruction capabilities by the U.S. Federal Government at their Oak Ridge National Laboratories (ORNL). Anguil continues to help producers drive down energy consumption and emission output...

    By Anguil Environmental Systems, Inc. based in Milwaukee, WISCONSIN (USA).

  • Premium

    Measurement of hydrogen sulfide & carbon disulfide in air for continous emission monitoring

    The Series 8900 Hydrogen Sulfide and Carbon Disulfide Analyzer provides direct measurement of H2S and CS2 in ambient air. This instrument is utilized for continuous emission monitoring. The Series 8900 H2S and CS2 Analyzer employs a Photoionization detector (PID) as the sensing element. A dual column configuration with timed backflush to vent is used to strip off moisture and heavier hydrocarbons. A pre-cut column is used in series with the analytical column. At sample injection a fixed volume of sample is...

    By AMETEK MOCON - Baseline based in Lyons, COLORADO (USA).

  • Premium

    Carbon footprinting calculations for environmental management

    With its expertise in calculating and managing emissions data, CERC offers a range of services to assess greenhouse gas emissions, from determining the carbon footprint of a single industrial process, to compiling a greenhouse gas inventory for a whole geographical area.

    CERC uses methods and emission factors laid out by the Intergovernmental Panel on Climate Change (IPCC). Emissions from transport, industrial, heating and agricultural activities are calculated and stored using the EMIT software...

    By Cambridge Environmental Research Consultants (CERC) based in Cambridge, UNITED KINGDOM.

  • Premium

    Continuous emissions monitoring for palm oil plants

    Make more out of your mill. OPSIS tested and approved monitoring systems provide cost-effective and reliable on-line monitoring of several gas compounds, such as both high and low concentrations of methane, moisture, carbon dioxide and hydrogen sulphide, at several locations.

    By Opsis AB based in Furulund, SWEDEN.

  • Premium

    Gas Detection Solutions for Carbon Fiber Manufacturing Industry

    The carbon fiber manufacturing industry requires a unique process control solution that conventional gas detection technology lacks. Boreal Laser’s line-of-sight laser based gas detection system is the perfect fit for measuring HF in various pan oven applications and stack emissions monitoring . Whether you are looking for gas detection solutions for safety, environmental or process control needs Boreal Laser has you covered.

    By Boreal Laser Inc. based in Edmonton, ALBERTA (CANADA).

  • PLAZKAT systems for treatment of emissions from ferrous and non-ferrous metal working industries

    Metal casting and heat treatment processes are associated with harmful gaseous emissions into the atmosphere which include substances such as carbon monoxide, nitrous oxides, oil vapors and sulfur dioxide.

    By Plasma Air Systems Corporation based in Harju Maakond, ESTONIA.

  • Solutions for Petrochemical

    Petrochemical plants, and especially their process water recovery plants, are a major source of air pollution. If odours are a recurring problem, the emission of greenhouse gases may also be particularly important.

    By Pi² Technologies Inc based in Montreal, QUEBEC (CANADA).

  • RDF

    RDF (Refuse Derived Fuel) is made from domestic waste which includes biodegradable material as well as plastics, and has a lower calorific value than SRF (Solid Recovered Fuel). RDF (Refuse Derived Fuel) is used in combined heat and power facilities, many of them in Europe where they produce electricity and hot water for communal heating systems in the local area. Compared to landfilling, the lower carbon emissions resulting from RDF manufacture outweigh the emissions associated with transporting the reclaimed...

    By MK Group based in Galbally, IRELAND.

  • Dominator despackaging machines for Municiple waste to energy industry

    Energy recovery from municipal waste is the conversion of non-recyclable waste materials into usable energy like heat, electricity, or fuel through a variety of processes, including combustion, gasification, pyrolization, anaerobic digestion and landfill gas recovery. This process is often called waste to energy by the industry.

    By Rowan Food and Biomass Engineering Ltd based in Gloucestershire, UNITED KINGDOM.

  • PLAZKAT systems for treatment of emissions in the petrochemical industry

    Today, the reduction of atmospheric emissions produced by the gas processing and petrochemical industries is an acute problem. The most widely used technique of exhaust gas treatment comprises complete burning, even though this method does not provide an adequate degree of treatment. Therefore, in this case PLAZKAT systems are a more effective solution for removing aromatic hydrocarbon from the emissions.

    By Plasma Air Systems Corporation based in Harju Maakond, ESTONIA.

  • PLAZKAT systems for treatment of emissions from motor and railroad vehicles

    PLAZKAT Aero systems are used to treat emissions from motor and railroad vehicles. It has been found that exhaust gases from internal combustion engines (ICE) contain over 250 ingredients. Major components include carbon oxides, nitrogen oxides and hydrocarbons.

    By Plasma Air Systems Corporation based in Harju Maakond, ESTONIA.

  • Dead tree disposal

    By converting dead trees into wood chips and gasifying them, our machine produces clean electricity and offsets disposal costs. Disposal by gasification also has far lower particulate emissions than controlled burns and a lower carbon footprint than decomposition, since methane emissions from anaerobic decomposition are avoided. Decomposing wood reverts all of its carbon content to CO2, but gasification sequesters a portion of it as charcoal waste, usable as biochar.

    By All Power Labs based in Berkeley, CALIFORNIA (USA).

  • Carbon Dioxide (CO2) monitoring

    Carbon dioxide (CO2) is emitted in a number of ways. It is emitted naturally and through human activities like the burning of fossil fuels. Carbon dioxide (CO2) is generated as a by-product of the combustion of fossil fuels or the burning of vegetable matter, among other chemical processes. Small amounts of carbon dioxide are emitted from volcanoes and other geothermal processes.

    By Ecotech Pty Ltd based in Knoxfield, AUSTRALIA.

  • Measurement solution for on-line carbon bed system

    Commonly, activated carbon beds are used as abatement systems on plant, with emissions being reduced by adsorption onto the bed. The efficiency of any abatement system is critical to its operation, not just in ensuring emissions are reduced as much as possible, but an efficient bed has cost savings for the operator.

    By Protea Limited based in Middlewich, UNITED KINGDOM.

  • Air Quality & Emission Management Issues

    • Development of documents substantiating the volumes of emissions of pollutants into the air from stationary sources for enterprises, organizations and private entrepreneurs; • Inventory of air pollutants emissions from stationary sources; • Preparing, maintenance support of documentation for receiving a Permit for Emissions of Pollutants into the Air from Stationary Sources (PEPASS) *, issued by the Departments of Environment and Natural Resources of the regional state administrations of Ukraine; • Development...

    By PP `Tehnologia O` based in Vinnytsia, UKRAINE.

  • Continuous emissions monitoring for carbon capture and storage

    The process control of a CO2 capture plant needs good and reliable detection of gas phase NH3. Measuring NH3 is a challenge due to the corrosive environment and high concentrations of NH3. Several places in the process needs to be monitored and to transport the sample is difficult. A large dynamic range is needed as the NH3 concentration can vary between 15% volume and a...

    By Enviro Technology Services Ltd based in Stroud, UNITED KINGDOM.

  • Measurement solution for carbon fibre manufacture

    Carbon fibre is a unique material and is found in many high-tech industries such as sports car manufacture, wind turbine blade construction and sports equipment. The production of carbon fibre from acrylic fibre involves the baking of the fibre in ovens, which gives emissions of gas species including Hydrogen Cyanide (HCN). Protea’s range of gas analysers can provide a solution for the periodic or continuous measurement of gases from carbon fibre production in order to give reportable emissions values as...

    By Protea Limited based in Middlewich, UNITED KINGDOM.

  • CO2 / CO Monitoring in Air

    CO (carbon monoxide) and CO2 (carbon dioxide) are generally measured to ensure process control. CO2 is the desired product and CO is undesired in combustion since it will explode in high enough concentrations. CO2 and CO concentrations can also be used to determine other process-specific efficiencies. Continuous emissions monitoring equipment that can be calibrated as a CO and CO2 analyzer is thereby essential for process control.

    By Unisearch Associates Inc. based in Concord, ONTARIO (CANADA).

  • Vacuum systems in residential areas

    As waste volumes continue to grow, more and more stringent demands are being made of waste handling with regard to hygiene and the environment. The Envac vacuum system for waste handling in residential areas is a long-term investment offering both financial and environmental benefits, as well as other added value.

    By Envac AB based in Stockholm, SWEDEN.

  • Aquatech Water Management Solutions for Unconventional Gas

    Managing produced water from shale gas wells is challenging and requires a variety of solutions & services. Aquatech offers mobile and/or central facility solutions that provide customers to suit their needs. The demands of field operations on equipment and personnel require a high level of continued dedication, experience, & engineering. Aquatech delivers reliability on all of these fronts to ensure that water management & treatment enable gas production to proceed rapidly and efficiently. Our solutions ensure...

    By Aquatech International Corporation based in Canonsburg, PENNSYLVANIA (USA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you