Only show results in Michigan? Ok

Cleanroom Monitoring Applications

  • Premium

    Airborne Molecular Contamination

    Cleanroom Monitoring Of Detrimental ...

    By AMETEK MOCON - Baseline based in Lyons, COLORADO (USA).

  • Premium

    Gas analyzers for clean air room monitoring

    The ambient air in clean air rooms needs to be constantly monitored for the safety of workers and of the production according to the environment. A clean air room is a room where the concentration of particles is controlled in order to minimize the introduction, the generation, retention of particles inside, for instance for chip production or the production of ...

    By Chromatotec Group based in Val de Virvée, FRANCE.

  • Premium

    Chemiluminescense based analyzer for environmental applications

    Focuses on low NOx and NOx-related concentrations up to 100 ppm where high resolution is required. Parameters included are NO, NO2, NOx and NOy. Target applications are ambient air monitoring, indoor measurement, clean room measurement and atmospheric ...

    By ECO Physics AG based in Duernten, SWITZERLAND.

  • Premium

    Data loggers and data acquisition monitoring solutions for the cleanroom sector

    Cleanroom monitoring systems to assure and certify sterility in cleanrooms and other isolated areas that require users to monitor, record, alarm and validate data. Stand-alone and graphic display models. With cleanroom monitoring systems, effective sterility assurance in cleanrooms and other isolated areas requires users to monitor, alarm and validate data as the three critical tenets of a comprehensive environmental monitoring ...

    By CAS DataLoggers based in Chesterland, OHIO (USA).

  • Smoke generator device for clean room solutions

    The correct functioning of HEPA filters is normally tested at the time of installation, as well as part of the routine maintenance programme. It is normally recommended that HEPA filters are checked at 14 month intervals or less, or immediately after filter changing. Where high efficiency filters are fitted, it is vital that the filter housing/sealing device does not allow particulate material to pass and thereby compromise the clean room environment that is being served. Testing is necessary since HEPA filters ...

    By Concept Smoke Systems | Concept Engineering Ltd. based in Maidenhead, UNITED KINGDOM.

  • Cleanrooms for Chemicals

    Chemicals are used in a variety of industries in a variety of ways. Hazardous chemicals and chemical testing and processes require specially controlled cleanroom environments. These cleanrooms must adhere to ISO 14644-1 cleanroom classifications, and generally must meet a minimum classification of ISO Class 8. ...

    By Angstrom Technology based in Grand Rapids, MICHIGAN (USA).

  • Cleanroom testing equipment

    Clean room testing equipment Aerosol generators, dilution system, particle counter, sampling probe, distribution system ISO 14644-3 cleanroom classification, filter integrity test, recovery time, protection factor DIN 1946-4 ...

    By Topas GmbH based in Dresden, GERMANY.

  • Monitors, gas analyzers solutions for ISO 22716 solutions for cosmetics & personal care

    Providing you with a complete spectrum of contamination monitoring solutions. The Cosmetics and Personal Care manufacturing industry is required to meet ISO 22716:2007 and worldwide GMP Standards for hygienic production and contamination control. This includes monitoring viable and non viable contamination that could impact the safety and quality of your products. Particle Measuring Systems brings in-depth knowledge of manufacturing processes and regulatory codes, such as ISO 22716, to Cosmetics and Personal Care ...

    By Particle Measuring Systems based in Boulder, COLORADO (USA).

  • Open Path Analyser for Gas Measurements

    Trace contaminant monitoring in process applications and air quality measurements. Gas measurements play a critical role in both maximising product yield through trace contaminant detection, and ensuring the health and safety of employees and the general public. In addition, the wider environment is also protected from potentially harmful emissions. ...

    By MIRICO based in Chilton, UNITED KINGDOM.

  • Cleanrooms for Medical Research

    Medical research laboratories require strict cleanroom conditions. For example, for research involving blood or stem cells, an ISO Class 5/Fed Std 209E Class 100 to ISO Class 7/Fed Std 209E Class 10,000 cleanroom environment is necessary, per ISO 14644 standards. Other medical laboratories are subject to ISO 15189, which also has regulations of control of the laboratory ...

    By Angstrom Technology based in Grand Rapids, MICHIGAN (USA).

  • Monitors, gas analyzers solutions for ISO 14644-1/2: 2015 insights & solutions

    ISO 14644-1:2015 continues to pose challenges to cleanroom managers and manufacturers. Here we provide several sources of information to help everyone from those new to this ISO regulation to veterans in the field. Our team of regulatory experts have put together a package of information so you can easily understand the requirements and what you need to do to meet them. Get a summary of ISO 14644-1:2015 by reading the paper below or watching the recorded webinar at the right. We also have FAQs and a paper to learn ...

    By Particle Measuring Systems based in Boulder, COLORADO (USA).

  • Cleanroom Solutions from Concept Smoke Systems

    The correct functioning of HEPA filters is normally tested at the time of installation, as well as part of the routine maintenance programme. It is normally recommended that HEPA filters are checked at 14 month intervals or less, or immediately after filter changing. Where high efficiency filters are fitted, it is vital that the filter housing/sealing device does not allow particulate material to pass and thereby compromise the cleanroom environment that is being served. Testing is necessary since HEPA filters can ...

    By Concept Smoke Systems | Concept Engineering Ltd. based in Maidenhead, UNITED KINGDOM.

  • Monitors, gas analyzers solutions for pharmaceuticals / life sciences sector

    The only complete Contamination Monitoring Solutions Provider. Since 1972, Particle Measuring Systems has been the global expert in contamination monitoring, providing the pharmaceutical and other life science industries with the expertise to detect, analyze and manage cleanroom contamination so you can meet all regulatory requirements including ISO 14644-1:2015 and EU GMP Annex ...

    By Particle Measuring Systems based in Boulder, COLORADO (USA).

  • PID sensors for OEMs industry

    Ion Science leading PID sensors are recognised around the world by original equipment manufacturers for their longevity, stability and critically their resistance to humidity, so are ideal for deployment across a wide range of testing environments and diverse ...

    By Ion Science Ltd. based in Royston, UNITED KINGDOM.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you