Only show results in Massachusetts? Ok

Cleanrooms Applications

  • Premium

    VOC abatement equipments for pharmaceutical

    Humidity control is an important factor for stable and predictable pharmaceutical production. From R&D labs to bulk production, humidity can affect both the chemical and mechanical properties of formulations, which can lead to quality issues and Good Manufacturing Practice (GMP) challenges. Laboratory and pharmaceutical product dehumidification systems can be the right solution to help prevent moisture issues during the production process for tablets, capsules, powders, and strips.

    By Munters based in Amesbury, MASSACHUSETTS (USA).

  • Premium

    Gas analyzers for clean air room monitoring

    The ambient air in clean air rooms needs to be constantly monitored for the safety of workers and of the production according to the environment. A clean air room is a room where the concentration of particles is controlled in order to minimize the introduction, the generation, retention of particles inside, for instance for chip production or the production of medicines.

    By Chromatotec Group based in Val de Virvée, FRANCE.

  • Premium

    Chemiluminescense based analyzer for industrial applications

    Focuses on medium NOx, NOx-related and multigas-concentrations up to 5’000 ppm where flexibility is a central requirement. Parameters included are NO, NO2, NOx, NH3, NOx-amines, O2 and CO2. Typical supported applications are industrial emission monitoring and gas manufacturing control.

    By ECO PHYSICS AG based in Duernten, SWITZERLAND.

  • Premium

    Chemiluminescense based analyzer for environmental applications

    Focuses on low NOx and NOx-related concentrations up to 100 ppm where high resolution is required. Parameters included are NO, NO2, NOx and NOy. Target applications are ambient air monitoring, indoor measurement, clean room measurement and atmospheric research.

    By ECO PHYSICS AG based in Duernten, SWITZERLAND.

  • Premium

    Microbiological solutions for the industrial industry

    The MiL routinely performs rapid microbial identifications, confirmations, and tracks contaminant sources of all pathogenic, indicator and spoilage organisms using the latest technologies such as GC FAME, Biolog, Ribotyping, and 16S rRNA base pair sequencing. Our computerized identification databases have over 3,500 microorganisms profiled and include all pathogenic bacterial strain subspecies, yeast and molds, and actinomycetes.

    By Microbe Inotech Laboratories, Inc based in St. Louis, MISSOURI (USA).

  • Premium

    Engineered clean air flexibility solutions for alternative energy applications

    Environmental control is easier said than done when you’re manufacturing alternative energy solutions. Humidity, temperature fluctuations, and dust can corrode your copper solar panel or battery components. Metal finishing, coating, or painting containment is a daunting task when working with behemoth turbine bases and blades. But, how do you isolate your critical processes in a controlled clean air environment without breaking your material handling budget? The answer is a flexible indoor air filtration...

    By Duroair Technologies Inc. based in Niagara Falls, ONTARIO (CANADA).

  • Premium

    Engineered clean air solutions for lean manufacturing applications

    Whether you call it lean manufacturing or Just-in-Time (JIT) manufacturing, eliminating waste isn’t a new concept for bottom-line minded manufacturers. But, it isn’t easy to reduce operating costs while creating more value for your customers. This is especially the case for welding, sanding, painting, or other processes that produce harmful air contaminants and create production bottlenecks for larger construction projects. What if you had a portable, clean air solution to protect your employees from...

    By Duroair Technologies Inc. based in Niagara Falls, ONTARIO (CANADA).

  • Premium

    Engineered clean air solutions for marine applications

    You already know there’s no such thing as simple one-piece flow when it comes to boat building and repair. Larger pieces must be built in place and smaller subsystems, pipelines, and foundations are usually brought to the site. For smaller crafts, hulls and decks must be moved between workstations, usually via overhead cranes.

    By Duroair Technologies Inc. based in Niagara Falls, ONTARIO (CANADA).

  • Premium

    Engineered clean air solutions for metal fabrication applications

    Whether you’re cutting, welding, coating, grinding, or sanding, every metal fabrication task produces dust and fumes that can threaten your employees’ safety, derail productivity, increase maintenance costs, and place you in directly in the EPA’s crosshairs. Oil mist and dust particles can settle into every crack and crevice of your machinery, electronics, and cooling fans, eventually causing equipment failure and downtime. Who has the time and resources to redesign an entire facility around a...

    By Duroair Technologies Inc. based in Niagara Falls, ONTARIO (CANADA).

  • Premium

    Engineered clean air solutions for stone cutting applications

    Stone cutting is one of the messiest operations in manufacturing – and the most hazardous. When it comes to producing dust, stone cutting generates clouds of dust that is far from harmless. Most concrete, masonry, and stone contain sand that is made of quartz and creates crystalline silica when cut. The inhalation of silica particles can scar the lungs or even lead to silicosis. Of course, you don’t need OSHA and NIOSH to tell you that silica dust is dangerous. What if you had a portable clean air...

    By Duroair Technologies Inc. based in Niagara Falls, ONTARIO (CANADA).

  • Premium

    Environmental solutions for the drying and curing sector

    In the industrial sector, drying and curing technologies from Dürr MEGTEC have been deployed in roll-to-roll processing applications for advanced battery materials, coatings of various types, composites, solar films, membranes, flexible packaging, coil coating, converting, printing, electronics, nonwovens, and other industries. Our patented flotation air bar systems transport webs contact-free without web shift, which helps ensure product quality. Capable of handling webs at a wide range of speeds and...

    By Dürr Systems, Inc. based in De Pere, WISCONSIN (USA).

  • Premium

    PID sensors for OEMs industry

    Ion Science leading PID sensors are recognised around the world by original equipment manufacturers for their longevity, stability and critically their resistance to humidity, so are ideal for deployment across a wide range of testing environments and diverse applications.

    By Ion Science Ltd. based in Royston, UNITED KINGDOM.

  • Premium

    Engineered clean air solutions for transportation applications

    From alternating between initial paint sprays and repairs with finishing and coating applications, you’re too busy to worry if your shop floor air is OSHA or EPA compliant. You want to protect your employees against sanding dust and spray fumes, but facility-wide HVAC systems can suck the air out of your bottom line. What if you had a cost-effective, clean air solution that could protect your employees from airborne hazards and even speed up drying times for a more efficient work flow?

    By Duroair Technologies Inc. based in Niagara Falls, ONTARIO (CANADA).

  • Premium

    Data loggers and data acquisition monitoring solutions for the cleanroom sector

    Cleanroom monitoring systems to assure and certify sterility in cleanrooms and other isolated areas that require users to monitor, record, alarm and validate data. Stand-alone and graphic display models. With cleanroom monitoring systems, effective sterility assurance in cleanrooms and other isolated areas requires users to monitor, alarm and validate data as the three critical tenets of a comprehensive environmental monitoring plan.

    By CAS DataLoggers based in Chesterland, OHIO (USA).

  • Premium

    Environmental solutions for the composites & carbon fiber industry

    Custom or hybrid styles and designs to fit your needs. Dürr Megtec provides roll-to-roll drying, curing and thermal air-handling systems for coating and laminating applications, such as composites, carbon fiber and thermoplastics. Whether you need a small, value-priced roll-support dryer, a custom-configured air flotation dryer or a complete coating line for a specialized application, Dürr Megtec has the products and services to meet your requirements. Our technical application and design engineers work...

    By Dürr Systems, Inc. based in De Pere, WISCONSIN (USA).

  • Premium

    Engineered clean air solutions for aerospace & aviation applications

    Aerospace and aviation machining, welding, metal finishing, coating, and painting processes are complex and messy, often requiring clean rooms with precise temperature and humidity controls, as well as the need to isolate and capture contaminants via positive or negative pressure. But, expensive permanent enclosures aren’t efficient for alternating between short-term production projects and long-term constructions. What if you had a flexible clean air alternative that you could quickly deploy for existing...

    By Duroair Technologies Inc. based in Niagara Falls, ONTARIO (CANADA).

  • Premium

    Engineered clean air solutions for military & defense applications

    Between manufacturing, MRO, and prototyping R&D, you don’t have time to rearrange your entire facility with the dedicated space and ductwork to shield your employees from airborne hexavalent chromium and VOCs generated during sanding and painting operations. What if you could defend against these air hazards with a portable clean air solution that moves with your manufacturing changeovers and alternating finishing and coating tasks? Duroair’s custom-engineered indoor air filtration systems do just...

    By Duroair Technologies Inc. based in Niagara Falls, ONTARIO (CANADA).

  • Filtration systems & solutions for industrial process sector

    The process industry demands filters that can withstand the most extreme and aggressive conditions of temperature, pressure and corrosion, whilst safeguarding operators and systems from particulates and ensuring environmental protection. Each filtration and separation requirement presents its own critical challenges and requires superior reliability, durability and a robust product construction.

    By Porvair Filtration Group based in Fareham, UNITED KINGDOM.

  • Monitors, gas analyzers solutions for semiconductor / microelectronics sector

    PMS has the application expertise and products with industry leading sensitivity you need to reduce yield loss. Particle Measuring Systems can provide you with the tools to determine how clean your semiconductor or microelectronics manufacturing environment is. By continuously monitoring particles when and where products are at risk, we provide the global expertise and high-performance laser particle counters you count on.

    By Particle Measuring Systems based in Boulder, COLORADO (USA).

  • Cleanrooms for Specialty Chemicals Sector

    The specialty chemicals market covers activities in which the use of specially adapted additives can add value to our clients’ products. Our expertise is based on our own cross-fertilisation strategy: our Application Laboratories follow the technical specifications and use or adapt additives from our various different sectors, from paper and textiles to paints. This approach allows us to offer new, stand-out solutions to our partners and clients.

    By Protex International based in Levallois-Pari, FRANCE.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you