Cleanrooms Articles

  • How Proper Coil Cleaning Increases Savings, IAQ and System Efficiency

    As things begin to heat up this summer, more and more HVAC facility managers and technicians will experience equipment and maintenance headaches. Take for example air conditioning systems. Even a well-maintained HVAC system consumes a lot of electricity, especially during the summer months.  In ...

  • Lumen Recommendations for Common and Industrial Work Spaces

    Lumen Recommendations for Common and Industrial Work Spaces Light brightness requirements for common and industrial spaces differ greatly. To achieve consistent, bright environments, the fixture’s luminous flux (or lumen [lm], which is the SI unit of luminous flux) must be taken into consideration. By definition, the term “luminous flux” (lx) refers to ...


    By Larson Electronics LLC

  • The Importance of Explosion Proof Lights in Cleanrooms

    Cleanrooms are pushing the limits of industrial manufacturing and scientific research programs. For professionals, the rooms provide a predictable environment with low levels of stray pollutants, germs, dust and chemical vapors. Activities conducted in cleanrooms are carried out with greater precision and safety. ...


    By Larson Electronics LLC

  • Case study - Safety, Protection against corrosion and cabinet pressurisation in refineries

    The environment in a refinery is highly corrosive. This makes it necessary to deploy control systems not only to protect staff but also to protect the equipment controlling the processes, in order to ensure their reliability. Bioconservacion has equipment that is specially designed for the safety of staff, and for protecting against corrosion in control rooms and cabinet pressurisation equipment. ...


    By Bioconservacion SA

  • Sources of Particles in Cleanrooms

    Viable particles consists of bacteria, virus, fungal spores, molds, and yeast.  These are generally obtained from people, outside air, water, equipment, tools, excipients, and active ingredients. The objectives of environmentally controlled cleanrooms are to provide a contamination-free space to test or manufacturer contamination free products.  Nonetheless, contamination has a way of ...


    By Climet Instruments Company

  • Plastics case study - Acro

    Smart Elbow® solves plastics problem Subject ACRO Extrusion Corporation's Wilmington, DE plant. Situation Stainless steel sweep elbows were wearing through at ACRO Extrusion Corporation, causing considerable downtime, product loss, and maintenance expense. The sweep elbows in their pneumatic conveying system were ...


    By HammerTek Corporation

  • We help you to handle highly active ingredients - Case Study

    Pharmaceutical research continues to develop more active ingredients and potent compounds. Thus the demands on containment in production installations are increasing and operator protection becomes even more important. The basic design of the AVA conical mixer and dryer allows for easy and effective containment. They are, by their very nature, self-contained systems. Agitator shaft bearings and ...


    By AVA GmbH u. Co. KG

  • Tissue Manufacturer Uses WEIMA Machinery to utilize waste and increase profits case study

    Nestled in the rolling hills of North Carolina (USA) is a tissue manufacturing plant that will take your breath away at first glance. This state-of-the-art facility is over one million square feet and operates around the clock producing large quantities of tissue and paper towels. This particular plant prides itself in being safe, profitable, and environmentally friendly. In order to reach these ...


    By WEIMA

  • Industrial applications – Air analysis in clean air room - Case study

    Context & Challenges To ensure people’s safety and a good repeatability of industrial process, the analysis of ambient air is crucial. Especially, electronic boards are produced in clean air room by complex lithographic process using very reactive chemicals. The nature and concentration of volatile compounds can be different depending on the chemical process and can also vary ...


    By Chromatotec Group

  • Oxygen Monitor for FOUPs in Semiconductors and Cleanrooms

    Over time, the contamination control requirements in the semiconductor industry have become more stringent. Employees now must spend more time adhering to cleaning protocols to preserve the sanitary nature of the environment and comply with regulations. The front-end unified pod (or FOUP) began appearing in semiconductors in the 1990s, serving as a transportation box to safely and ...

  • Can you source a glass washer which can be accessed from two sides?

    Question: Can you source a glass washer which can be accessed from two sides? Answer: Smeg have just launched the solution to this with the GW6010 professional glass washer. The 6010 has 20 pre-set program washes and 20 free programs for customisation. The unit comes with a peristaltic pump for both liquid detergent and liquid neutraliser and an additional 2 pumps are ...


    By Camlab Limited

  • What are the key steps in measuring pH? Why do I need to calibrate?

    pH is a useful parameter which is used across all industries for quality control, environmental monitoring, lab work and much more. There are 10 key steps which should be followed to ensure pH measurements using a meter are accurate. pH is a useful parameter which is used across all industries for quality control, environmental monitoring, lab work and much ...


    By Camlab Limited

  • Thematic Issue: Nanomaterials’ Functionality

    Nanomaterials: addressing the challenges, benefiting from the opportunities Some of the deepest challenges we will face in the coming decades derive from the opportunities offered by emerging technological advances. Many of these will improve our quality of life, and develop our economies, but all will be measured against the overarching principle that we do not make some error, and harm ...

  • Sonochemical synthesis and characterisation of bio-based hydroxyapatite nanoparticles

    Bio-based hydroxyapatite nanoparticles were synthesised via the sonochemical route using phosphoric acid and bio-based calcium carbonate particles extracted from eggshells. Hydroxyapatite is a natural bio ceramic material that contains calcium phosphate group. In this procedure phosphoric acid solution was used as the source of phosphorus and eggshell particles were used as the source of ...


    By Inderscience Publishers

  • Enclosure for small laboratory equipment case study

    Process Details Large cryogenic mill designed for cryogenic grinding and pulverising tough and temperature sensitive samples immersed in liquid nitrogen. Supply Stainless steel desktop acoustic enclosure 760mm wide x 720mm deep x 710mm high Product selection Enclosure needed to be lockable, able to collect ...


    By Wakefield Acoustics Ltd

  • Tissue manufacturer uses WEIMA machinery to utilize waste and increase profits case study

    Nestled in the rolling hills of North Carolina (USA) is a tissue manufacturing plant that will take your breath away at first glance. This state-of-the-art facility is over one million square feet and operates around the clock producing large quantities of tissue and paper towels. This particular plant prides itself in being safe, profitable, and environmentally friendly. In order to reach these ...


    By WEIMA

  • A path forward for climate talks - If the 2015 U.N. climate talks in Paris are going to have a breakthrough, some drastic changes need to take place.

    Time and again the scientific urgency for global action on climate change is stifled by chaotic U.N. climate talks as politics and process prevents the world’s policy makers from coming up with a clear plan for 2020 to divide up the global effort of reducing greenhouse emissions.  Looking ahead to the 2015 talks in Paris, can the U.N. Framework Convention on Climate ...


    By Ensia

  • Scaletron - case study

    The Customer L A Maintenance is a leading building services maintenance contractor well known for its innovative approach. One of its functions is the maintenance of air-conditioning units for computer suites and other areas where controlled air quality is essential. The problem In order to ensure a controlled air quality the air conditioning units are ...

  • Why Water Scale is Dangerous for Equipment

    Mineral scale occurs wherever circulating water exists, and it forms very fast (generally less than 3 weeks). Even a very thin layer, it will also cause insulation, make equipment inefficient, increase cost, and in some serious cases, it will shut down the whole system and even cause explosion. These problems have already existed in different fields, and are becoming worse and worse. ...


    By Mibo International Corp.

  • The Right Choice to Maintain Hotel Rooms

    Maintaining high-traffic areas in hospitality settings, such as hotel rooms, can be a really overwhelming task. After all, impeccable maintenance of hotel rooms encompasses a multitude of applications, including disinfecting the toilets, scrubbing floors, cleaning counters, deodorizing mattresses, and more. As more and more people continue to use the facilities on a daily basis, it can be harder ...


    By Daimer Industries Inc.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you