Combustion Monitoring News

  • Introduction offer from NEO Monitors; LaserGas III SP CO Combustion analyzer

    NEO Monitors is presenting another great campaign, valid from November 15th to June 30th. The new LaserGas III CO Combustion is a new multicomponent analyzer targeting combustion control on boilers, process heaters, fired heaters and others. It is one of the most compact TLAS analyzers that is certified for use in all zones (except ZONE 0) making it ...


    By NEO Monitors AS

  • PJM monitor recommends capacity market changes

    The PJM Interconnection’s independent market monitor says in a new report that PJM’s wholesale energy, capacity and regulation markets produced competitive results through the first nine months of 2016, but recommended new changes to enhance competitiveness and efficiency. The report, released by PJM’s Independent Market Monitor Monitoring Analytics, found that energy market ...

  • Combustion analyzer for rough environments

    Based on decades of experience and customer feedback, NEO Monitors has designed an Ex-d certified tunable diode laser (TDLS) analyzer. The instrument is based on the proven LaserGas™ III platform, and is for those that need CO-monitoring in combustion processes. In combination with LaserGas™ III SP O2, the analyzer is the answer to any combustion process where ...


    By NEO Monitors AS

  • We Are Pleased to Present Our 2016 Fall Trade-In Special

    Are you using one of our older combustion analyzers to monitor a commercial or residential HVAC system or furnace? If so, how is its condition? If you have one of our older combustion analyzers and feel like it's time for you to start using one that's more state-of-the-art, you might want to take advantage of our fall promotion. ...

  • EREF Awards Record 12 Master’s and Doctoral Scholarships, Including 3 New Named Scholarships

    The Board of Directors of the Environmental Research & Education Foundation (EREF) has awarded a record of 12 scholarships to Master’s and Doctoral students across the United States and Canada. Included in those 12 scholarships are recipients of 3 new named EREF scholarships: the Evergreen Surety Bond Scholarship, funded by Evergreen National Indemnity Company (Evergreen), the ...

  • New NIR Borescope Enables Continuous Reformer Temperature Measurement

    AMETEK Land, the leading industrial infrared non-contact temperature measurement specialist, has released the new Near Infrared Borescope (NIR-B) 3XR for industrial gas applications. The NIR-B 3XR delivers continuous reformer tube wall temperature (TWT) measurement and furnace optimisation and monitoring, allowing highly accurate temperature point data to be measured, stored and trended ...


  • Expand Your Knowledge of Combustion Analyzers by Attending Our NATE-Certified Training Course on Combustion Analysis

    Are you a NATE (North American Technician Excellence) certified technician? Are you looking for more understanding and knowledge of combustion analysis? Are you aware of the differences and importance of measuring new High Efficiency Condensing Boilers and Furnaces? Well, we here at E Instruments are excited to announce that we now have NATE-certified training courses for combustion analyzers ...

  • COD analyzer for laboratories

    LAR's QuickCODlab is a chemical-free working COD analyzer for the determination of the chemical oxygen demand (COD) in water. Due to an innovative injection and oxidation technique, unfiltered water samples incl. particulates will be injected ...


    By LAR Process Analysers AG

  • Johney Green to lead NREL Mechanical and Thermal Systems Engineering Research

    The Energy Department's National Renewable Energy Laboratory (NREL) has named Dr. Johney Green Jr. as Associate Laboratory Director for Mechanical and Thermal Systems Engineering. He will oversee the laboratory's transportation, buildings, wind, water and geothermal research programs.  Green comes to NREL from Oak Ridge National Laboratory (ORNL), where he has held a number of leadership ...

  • Testo and Ashtead announce new partnership

    Testo, a global leader in portable measurement technology, has appointed Ashtead Technology as platinum distributor for its portable emissions analysers, the Testo 340 and 350. As part of the agreement, Ashtead also becomes Testo’s Preferred Rental Partner for this equipment. “We have been renting Testo emissions analysers for over 10 years and our team have built up a wealth of ...


    By Ashtead Technology Ltd

  • JASC’s New Heatsink Clamp Reduces Risk of Coking in Idle Liquid Fuel Lines Near Combustor Cans

    The JASC Heatsink Clamp is designed to move heat away from idle liquid fuel lines by utilizing the adjacent coolant lines while the turbine is running on gaseous fuel. With liquid fuel flow checked in close proximity to the combustor cans during operation on gaseous fuel, the liquid fuel can slowly cook down to a sludge or worse yet form carbon deposits, aka coke, on vital components of the ...

  • Mobile altitude simulation system

    At this year’s Automotive Testing Expo Europe in Stuttgart, HORIBA presented MEDAS (short for: Mobile Efficient Dynamic Altitude Simulator), a completely innovative altitude simulator for optimizing performance and emission optimization in engine development intended for portable use. In this way, the Japanese company expands its range in the field of real driving emissions (RDE). MEDAS can ...


    By HORIBA Europe GmbH

  • New Boiler Safety Report Released

    Our team of experts has been hard at work and has just released a new report detailing How to Maximize Boiler Performance.  Below is a brief synopsis of the report, but the full edition can be found here and, with our permission, may be used as a white paper resource.       ...

  • Engine emissions analyser further improves Intertek’s emissions testing capabilities

    An advanced FTIR analyser installed at Intertek’s engine test facility in Milton Keynes is enabling engineers to improve the quality of their tests on the gaseous components of engine exhaust emissions.  The gas analyser manufactured by Gasmet Technologies and installed by their UK subsidiary, Quantitech, measures multiple organic and inorganic components simultaneously from ...


    By Gasmet Technologies Oy

  • Engine emissions analyser further improves Intertek’s emissions testing capability

    An advanced FTIR analyser installed at Intertek’s engine test facility in Milton Keynes is enabling engineers to improve the quality of their tests on the gaseous components of engine exhaust emissions. The gas analyser manufactured by Gasmet Technologies and installed by their UK subsidiary, Quantitech, measures multiple organic and inorganic components simultaneously from a large library ...


    By Quantitech Ltd

  • NEW E4500-N The IDEAL Commercial & Industrial Combustion Gas and Emissions Analyzer

    The NEW E4500-N Hand-Held Combustion Emissions Analyzer is a new, rugged unit with the ability to measure NOx from high efficiency & condensing boilers, burners, engines, turbines, kilns, furnaces, incinerators and other industrial combustion processes.  Featuring a new large COLOR display and expanded internal memory, the E4500-N lets you ...

  • Sensor+Test 2016

    LED Microsensor NT, LLC will be participating at Sensor+Test Expo 2016 in Nuremberg on May, 10-12. We invite you to visit us - Booth 661 Hall 1. This year we are glad to represent our new devices: LED analyzer LA-1t and MDS-4D Methane Sensor with built-in ZigBee/Bluetooth data transmission module and autonomous power supply. LA-1t LED analyzer is oriented for ...


    By LED Microsensor NT

  • CODEL International releases new EnergyTech range

    EnergyTech is a new range of gas and particulate analysers focused on power generation process, safety and efficiency. The EnergyTech 101 is a low cost optical dust/smoke monitor, the 301 is a new tribo-electric dust monitor that can be used in indicative and calibrated modes. The EnergyTech 200 series is a new range of mill, silo and other combustion process monitors configurable from 1 to 4 ...


    By Codel International Ltd

  • NEW E6000 Innovative Hand-Held Industrial Combustion Gas and Emissions Analyzer

    The NEW E6000 portable flue gas & emissions analyzer is designed for emissions monitoring, maintenance & tuning of BOILERS, BURNERS, ENGINES, FURNACES, TURBINES, KILNS, INCINERATORS, and many other industrial combustion processes requiring accurate emissions measurements. Measure Up To SIX Gases Simultaneously Built-in Printer & Full COLOR Graphic Display ...

  • USA Engines manufacturer renews its confidence in Environnement S.A.`s EGAS 2M monitoring systems

    Fully satisfied with its 2 turnkey EGAS 2M Systems provided by Environnement S.A in 2014, a leading Engine Manufacturer in the United States places a new order for a new EGAS turnkey cabinet. The EGAS 2M engine exhaust gas analysis system is the only system on the market allowing the measurement of 1 or 2 independent streams in a single analysis cabinet. Designed to measure ...


    By Environnement S.A

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you