Air & Climate Downloads

TTEC manufactures Thermocouple Assemblies for severe high temperature corrosive environments. These assemblies utilize an HR160 Thermowell or Protection Tube. HR160 is a solid, solution strengthened NI-Co-Cr-Si Alloy with outstanding resistance to various forms of high temperature corrosion attack. Outstanding High Temperature Corrosion Resistance. High levels of Cr & Si combine to form a ...

By Thermocouple Technology, LLC (TTEC)

TTEC Turbine thermocouples are custom manufactured to suit a variety of Gas and Steam Turbine Applications. These units are precisely manufactured in small or large quantities as direct replacements for the original equipment sensors provided. Designs include Turbine Exhaust, Inlet Air, Wheelspace and Compressor Discharge Temperature, Thrust Bearing, Bearing Drain, Gas Flow, Lube Oil Header, Disc ...

By Thermocouple Technology, LLC (TTEC)

Metal Ceramic, Grade LT-1 - hard, abrasion-resistant and dense - is a slip-cast composite of two compatible high temperature materials, chromium and aluminum oxide. Products made from Grade LT-1 material possess three properties of particular interest: Superior oxidation resistance to 2500ºF. Thermal conductivity comparable to that of stainless steel. Good resistance to wetting by most ...

By Thermocouple Technology, LLC (TTEC)

TTEC manufactures Thermocouple Assemblies for severe high temperature corrosive environments. These assemblies utilize an HR160 Thermowell or Protection Tube. HR160 is a solid, solution strengthened NI-Co-Cr-Si Alloy with outstanding resistance to various forms of high temperature corrosion attack. Outstanding High Temperature Corrosion Resistance. High levels of Cr & Si combine to form a ...

By Thermocouple Technology, LLC (TTEC)

Probe w/ Standard 3 Prong Plug. Sheath Length: 6.000 in. Calibration: Platinum 100 Ohm at 0ºC, DIN, .00385. Lead Insulation: Teflon. Form / Junction: Single - 3 Wire. O.D.: .250 in. Temperature Limit: -58 to 400 ...

By Thermocouple Technology, LLC (TTEC)

Probe w/ Standard 3 Prong Plug. Sheath Length: 6.000 in. Calibration: Platinum 100 Ohm at 0ºC, DIN, .00385. Lead Insulation: Teflon. Form / Junction: Single - 3 Wire. O.D.: .250 in. Temperature Limit: -58 to 400 ...

By Thermocouple Technology, LLC (TTEC)

Tadel SA is a fish flour and fish oil processing company in Rocafuerte, Ecuador. It produces 100 tons of flour a day from fish waste, resulting in approximately 300 m3/d of wastewater. The wastewater is a combination of washing water, boiler blowdown, and cooling-tower water, as well as waste from the broth concentration plant and from the drying of ...

By Fluence Corporation

This volume of News on Water highlights: • New ISO Standard 17943 for Determination of VOCs in Water by HS-SPME and GC-MS • Extraction of Organic Compounds from Water, Using ENVI™-18 DSK Solid Phase Extraction Disks • Watercol columns • Certified Reference Materials ready-to-use for water and waste water analysis • Detect low concentrations of impurities in water • The Standard Test Method for ...

By Merck KGaA, Darmstadt, Germany

The FGD process requires large amounts of high-quality water, Fluence supplied a fully redundant seawater reverse osmosis plant, at ENDESA CELTA power plant on the seashore in Tarapaca, Chile, to ensure against supply interruptions. The new plant provides 2,400 m3/d of high-quality, desalinated process water for FGD and other ...

By Fluence Corporation

Fluence advanced solution, treating wastewater for Tadel S.A. a fish flour and fish oil processing company in Ecuadorv and reducing its water supply costs. Production of 240 m /d of demineralized water for reuse Production of 60 m /d of excess water for irrigation Fuel savings: $140,000/year Water savings: $210,000/year Carbon Footprint reduction: 1290 tons CO per ...

By Fluence Corporation

The National Atmospheric Deposition Program (NADP) launched the Ammonia Monitoring Network (AMoN) in 2010 but first piloted a passive sampling program beginning in 2007 with 16 test sites, experimenting with different types of passive sampling devices. Illinois Water Survey (IWS) operates as the Central Analytical Laboratory (CAL) for NADP’s AMoN and deploys and analyzes the ammonia test ...

By Merck KGaA, Darmstadt, Germany

Achieve sensitive and reliable results with air sampling media for a wide range of applications in various configurations for solvent desorption, thermal desorption, passive and whole air sampling from Supelco. Ensure low background for carbonyl sampling with products that are produced to the highest quality standards in a carbonyl controlled manufacturing environment that are complemented by ...

By Merck KGaA, Darmstadt, Germany

The Dehumidifier B-296 is the ideal accessory to condition the drying air or to work continuously with water and organic solvent mixtures. It ensures process stability and ...

By BÜCHI Labortechnik AG

To minimize fresh water usage in the cooling cycle and boiler makeup of the power plant, Fluence designed and supplied a containerized system for treatment of cooling tower blowdown wastewater for reuse and the production of ultrapure water ...

By Fluence Corporation

Go Green! Reliable environmental analysis for air, water & soil testing We can support your environmental testing workflow from sample collection, preparation to analysis whilst supplying all your lab essentials and water needs. Quality is assured with our matrix standards and proficiency testing expertise. Our complete solution includes: Extraction and analysis of organic ...

By Merck KGaA, Darmstadt, Germany

In this case study we demonstrate how natural gas companies like Summit Midstream are using the EyeCGas optical gas imaging (OGI) technology to monitor & reduce emissions across operations, making it their mission to not just meet government regulatory goals, but to surpass ...

By EyeCGas -OGI by OPGAL

Greatest benefits of the econ VacuDry technology: Highly efficient thermal desorption is achieved due to a unique vacuum and indirect thermal oil heating system. Recovery of valuable resources rather than incineration. Highest safety and environmental protection standards – due to the vacuum process, nitrogen blanketing and full procedure control. Lowest emission of any desorber type ...

By econ industries services GmbH

With 50 years of experience in imaging, the creators of the UVP ChemStudio Imaging Systems, are the trusted experts in chemiluminescence and gel imaging ...

By Analytik Jena - an Endress+Hauser Company

EyeCGas® CO  is a handheld OGI camera for CO gas leak detection. With this camera you can safely and remotely detect and locate carbon monoxide as well as other harmful gases emissions. Whether these toxic gases are part of the manufacturing process, or a byproduct of the production line, EyeCGas® CO helps increasing safety and protect the ...

By EyeCGas -OGI by OPGAL

Thermal flaring technologies used for the destruction of Hydrocarbons, Volatile Organic Compounds (VOCs) or Hazardous Air Pollutants (HAPs) are designed in two basic configurations; open and enclosed flame burners. Recent regulations on visible emissions, vapor radiation, Greenhouse Gases (GHGs) and noise pollution have driven industry away from open flaring and towards the enclosed vapor ...

By Anguil Environmental Systems, Inc.