Dust Collectors News

  • Liquid Industrial Mesh Nylon Dust Collector Filter Bag Fabric Factory

    Product Description Liquid Industrial Mesh Nylon Dust Collector Filter Bag Fabric Factory High efficiency  Large capacity of dirty particles  Excellent air permeability Specification 1# 2# 3# 4# 5# Water flow(m3/h) 20 40 6 12 20 Filtration area(m2) 0.25 0.5 0.09 0.15 0.25 Diameter(mm/in) 180 / 7 180 / 7 100 / ...

  • Camfil APC expands testing laboratory

    Camfil Air Pollution Control (APC), a manufacturer of dust, mist and fume collection equipment, has doubled the size of its testing laboratory to include a climate-controlled facility with a new full-size dust collection test rig. The new equipment is dedicated to testing in accordance with ANSI/ASHRAE Standard 199-2016, Method of Testing the Performance of Industrial Pulse Cleaned Dust ...


    By Camfil Ltd

  • Introducing the NEW CV (Competitive Vac) Series

    CV (Competitive Vac) Series Vac-Tron Equipment is excited to introduce a whole new line to their vacuum excavation equipment. It’s the new CV (Competitive Vac) Series. This series offers the performance you have come to expect from Vac-Tron Equipment while keeping the cost of operation to a minimum.   Standard equipment: CV GT ...


    By Vac-Tron Equipment

  • RoboVent Introduces Space-Saving Dust Collector for Robotic Welding

    Robotic welding facilities can now meet air quality regulations without losing too much floor space. RoboVent, the leading manufacturer of clean air technologies, created RoboVent Spire® to address the needs of robotic welding operations where space is at a ...


    By RoboVent

  • Diversitech Launches the WX Series of Wet Dust Collectors

    Does Your Work Application Need a Wet Dust Collector? One of the serious by-products of many industrial work applications is known as combustible dust. If dust is combustible, it greatly increases the risk for explosion or fire, and with it the risk for severe injury or death. In addition to the human toll, combustible dust fires or explosions can also be devastating to a ...


    By Diversitech

  • MACPRESSE @DRUPA, Düsseldorf, 31 May – 10 June 2016

    The fair trade DRUPA  represents an important event for key operators of the printing equipment sector. A showcase of cutting-edge technologies for the printing, packaging, certified green printing and 3D printing sectors. We will be present with our solutions for box plants, printing plants ...


    By Macpresse Europa S.R.L

  • Nederman expands its product range - introduces the most flexible dust collector ever

    To ensure a perfect fit to any manufacturing application generating dust, smoke or fumes, Nederman introduces the L-series, a modular and fully configurable dust collector. In manufacturing facilities where dust and smoke is generated during the production process, it’s a primary objective to create a safe working environment with high production efficiency and low emissions to meet ...


    By Nederman

  • Another successful installation of pleated bags at steel plant

    One of the biggest manufacturers of railway tracks in Europe had issues with two of their main dust collectors. The problem was that irregular baffling in two dust collectors caused swinging of the 4 meter long filterbags. This resulted in holes in bags and thereby high emissions (higher than the 20mg/m3 set out by public authorities). Solution was to change out the 960 4m long filterbags to 960 ...


    By Nordic Air Filtration A/S

  • China Market for Flow Control and Treatment is Tricky

    The recent Chinese stock market meltdown has many flow control and treatment product and service suppliers re-evaluating their forecasts for this country. The impact on Chinese based suppliers has to be viewed in a different light than impact on the international supplier. “The implications are mixed” states the McIlvaine Company in N064 Air/Gas/Water/Fluid Treatment and Control: ...


    By The McIlvaine Company

  • Tama S.p.A: Pulco Air filter HTB

    The product The Pulco Air HTB baghouse dust collector is a dry filtration system used to purify the air of suspended solid particles. Its installation allows treatment of a vast range of pollutants and guarantees the quality of the air in the production environment and protection for workers. Filter inlet is composed of a pre-chamber, which recovers the ...


    By Tama Aernova Srl

  • Participation of Tama at mcTER

    mcTER Forest - Conference and Exhibition on Biomasses is an event, this year was its fifth edition, which combines an exhibition with vocational training for professional qualification. Tama participated to the event on the 25th June in Milan and the main products presented in this occasion are the PULCO AIR ...


    By Tama Aernova Srl

  • Macrotek Wins Back-To-Back Multi-Million Dollar Contracts for One Of World`s Largest Nickel Producers

    Global air pollution control provider, Macrotek Inc., has been awarded three consecutive contracts for baghouse dust collection equipment from one of the largest nickel producers in the world. The contracts amount to almost $3 million in total for the design, fabrication, supply, and delivery of baghouse dust collection equipment for a nickel emissions reduction project at a refinery in Sudbury, ...


    By Macrotek Inc.

  • Fire at Vernon, Connecticut, precision machining and fabricating facility sparks OSHA investigation

    What began as a fire in a titanium dust collection system at a precision machining shop in Vernon resulted in the U.S. Department of Labor's Occupational Safety and Health Administration's identifying and citing 20 safety and health violations at Soldream Inc. Proposed fines total $59,290. "In addition to fire and explosion hazards, workers at this facility faced serious cuts and amputations, ...

  • What common sense in using slime dryer

    Slime dryer is widely used in recent years, our use of coal need to be more efficient, more environmentally friendly, bangke simply use common sense points for slime dryer, we should pay more attention in the process of using the machine. Slime dryer details: slime dryer is widely used in coal, cement, mining, building materials, chemical, food, fertilizer production and other industries, in ...

  • “Dust Collection System Myth Busting” Webinar – Tuesday, March 4, 2014 12:00 pm EST

    Have you ever wondered if what you've heard regarding how to safely collect and handle combustible dusts or why your dust collection system isn't working as efficiently and effectively as it should is actually true? Join us online as we help separate myth from fact in a webinar sponsored by United Air Specialists and hosted by Powder & Bulk Engineering magazine titled: "Dust ...


    By CLARCOR Industrial Air

  • GEAPS Canadian Prairies Regional Tradeshow 2014

    AirSys had the pleasure to have a booth at this years GEAPS Canadian Prairies Regional Trade Show in Winnipeg on January 9th. The show was a great success with lots of attendees. This year Earnie gave a presentation on on ...


    By AirSys Technologies, Inc.

  • Nederman signs an agreement worth around SEK 30 million with one of Chinas largest automotive companies

    The customer is one of Chinas largest passenger car and commercial truck manufacturer. The turn-key solution includes design, manufacturing and installation of Nederman dust collection systems to a new foundry factory. The systems and filters will be produced in the Nederman plant in Suzhou, China. “We continue to focus on the Chinese market and once again we got proof on our ...


    By Nederman

  • AirSys Grain Insurer's Dust Control Presentation

    E.S. (Earnie) McCutcheon P.Eng. will be making a presentation to the Grain Insurer's in Winnipeg April 30, 2013. This presentation will be a discussion on dust collections systems, equipment and risks associated. You can find a copy of the presentation in the Resources section of ...


    By AirSys Technologies, Inc.

  • New Brochure Provides Method For Saving On Dust Collector Filters

    Camfil Air Pollution Control (APC) has published a new brochure that describes how to calculate "Total Cost of Ownership (TCO)" for cartridge dust collector filters. Manufacturing professionals can use the methodology in the brochure to select filters that will save money while improving performance. TCO identifies and calculates the main components of true filter cost: energy, consumables, and ...

  • New Dust Collector Hoppers Fit Low-Profile Applications

    Camfil APC has introduced two new dust collector hoppers for use where space constraints dictate the use of a low-profile dust collection system. Designed to fit Farr Gold Series® cartridge dust collectors, theLow Prohopper is best suited to collection of dust and fumes from cutting, blasting, welding and thermal spray operations; while theLow Boyhopper is for use with heavier dust-loading ...

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you