Only show results in Virginia? Ok

Dust Filter Bags services for Air and Climate

  • Laboratory Services

    To extend the lifetime of your filter media and to optimize your dedusting process our own  laboratory with a comprehensive range of services is available for you. We gladly assist you in the selection of materials and improve targeted by different impregnation and coating the life of your filter media.

  • Dust Filtration Services

    Wide variety; Airtechnic provides a wide range of dust collectors. For capacities up to 10,000 m³ per hour we offer dust collectors manufactured by MIX Srl. For larger capacities or very special applications we design dust collectors in-house. The basis of dust collectors designed by Airtechnic forms the oval shaped bag filters. The main ...

    By Airtechnic Solutions based in Tegelen, NETHERLANDS.

  • Wear Equipment Service

    The personnel, energy and wear costs of a size reduction machine soon exceed the costs of purchase. Too little attention is given to this fact when making an investment. We are committed to giving you advice and support on wear and have numerous special solutions in this area.

    By Herbold Meckesheim GmbH based in Meckesheim, GERMANY.

  • On Site Service

    Our experienced crews are available for emergencies or planned outage. Our crew chief has over 25 years of industrial maintenance experience. (electrical, pneumatics, blowers, airlocks, hydraulics). Filter Change Outs. Cartridge (pleated dust bag) conversions. System Repair (air locks, blowers, tube sheets replacement, timer boards, solenoids). ...

    By FilterPro based in East Lynne, MISSOURI (USA).

  • Extremely Low Pressure Drop

    In addition to inspecting the filter bags for proper installation or holes or tears, the following items should also be considered: Pressure Gauge Working - check the differential pressure gauge and the tubing leading to the dust collector. Ductwork, Dampers – inspect the ductwork to and from the dust collector for air leaks or blockage. ...

    By Destex Inc based in Albany, NEW YORK (USA). from Troubleshooting Service line

  • Primary (Continuous) Dusting

    A continuous flow of dust out of the exhaust of the clean air plenum is considered a primary dusting problem. Other causes of this condition are as follows: Holes in the Filter Bags or Bags Incorrectly Installed – inspect the filter bag assemblies for holes, rips, tears, or excessive wear. Make sure that the filter bags were installed ...

    By Destex Inc based in Albany, NEW YORK (USA). from Troubleshooting Service line

  • Secondary (Intermittent) Dusting

    Puffs of dust that are noted in the exhaust of the clean air plenum after each cleaning pulse is a secondary dusting problem. This condition is normal with new filter bags, and should stop after the first several hours of operation.

    By Destex Inc based in Albany, NEW YORK (USA). from Troubleshooting Service line

  • Short Filter Bag Life

    This is often a complicated problem to diagnose, and we recommend that you call us for advice.

    By Destex Inc based in Albany, NEW YORK (USA). from Troubleshooting Service line

  • Dust Collector Monitoring/Maintenance Services

    TRIBO.series detectors are sensitive to small changes in the level of particulate flow and quickly alert plant personnel to the early onset of filter failure. Early failure detection can save users significant maintenance and operating costs when operators respond to the onset of filter problems before disastrous failures occur. Undetected leaks ...

    By Auburn Systems, LLC based in Danvers, MASSACHUSETTS (USA).

  • Design / Complete Systems

    We can offer our customers expertise and know-how holistically, as a general contractor or a supplier of part solutions.

    By Friedli AG based in Burgdorf, SWITZERLAND.

  • Bag Testing

    ETS has established a complete, independent fabric-filter laboratory dedicated to fabric, dust and new/used bag testing. The laboratory has been serving industry for over 25 years, and has conducted thousands of bag analyses both for baghouse suppliers and users. Clients have used this service for new baghouse applications, new bag quality ...

    By ETS, Inc. based in Roanoke, VIRGINIA (USA).

  • Advanced Lab Testing Services

    You could have a significant amount of filter bags in your dust collector system without any knowledge of their condition, performance level or life expectancy. Just by sending us your used filter bags, we use our extensive lab equipment and our experienced technicians will conduct a thorough analysis of your used filter bags. These technicians ...

    By Albarrie Canada Limited based in Barrie, ONTARIO (CANADA).

  • Fitting and Installation Services

    Fitting filters is a dirty job, ideally you need someone who is experienced at this and can work quickly and cleanly. We are experienced in the fitting of all types of filters, from filter bags & sleeves in dust extraction systems, replacing air filters in air intake systems and replacing paint filters in spray-booths. We also re-fit filter ...

    By Scottex Precision Textiles Ltd based in Bury, UNITED KINGDOM.

  • Excessive Pressure Drop Across Filter Bags

    The differential pressure gauge or manometer on your dust collector should read 6″ w.g. or less. Higher readings and/or steadily increasing readings will result in a reduction of the main air flow through the dust collector which may produce a potential process problem such as poor suction through the evacuation control system. In extreme ...

    By Destex Inc based in Albany, NEW YORK (USA). from Troubleshooting Service line

  • On-site Service

    FilterCare on-site services offer around the clock specialised services relating to all aspects of our GUTSCHE porotex® range. Included in the list for your company’s needs is the removal and installation of filter bags, leakage testing, pre-coating, pressure loss measurements, onsite high pressure filter bag cleaning, maintenance of the ...

    By MGF Gutsche GmbH & Co. KG based in Fulda, GERMANY.

  • Spares and Componets Services

    We hold large stocks of all spare parts and components including: Fan Sets, Rotary Valves. Diverter Valves. Modular galvanised clipped ductwork.  PU Flexible Ducting (Heavy Duty, Medium Duty, Light Duty). Heavy duty polythene collection bags. Filter bags for most types of dust extraction systems.

    By Indusvent based in Rochdale, UNITED KINGDOM.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you