Only show results available in Connecticut? Ok

Dust Filtration Applications

  • Premium

    Industrial monitoring solutions for the dust collectors areas

    Most industrial processes have dust collectors of some form or other, the most popular being filter bag houses. Very few of these are covered by regulation other than to have a broken bag detector to prevent nuisance dusts escaping and creating a local nuisance. The CODEL StakGard is a low cost Tribo-electric monitor that directly measures mass particulate concentration by sensing the frictional charge created when particles collide with a conductor. The advanced electronics of the StakGard detect this signal and...

    By Codel International Ltd based in Bakewell, UNITED KINGDOM.

  • Premium

    Emission control solutions for clinker cooler and pre-heater dedusting sector

    The control of clinker fines emissions after the heatexchanger, placed downstream of the clinkercooler,is usually a problem for cementplant managers. The process is characterized by high material abrasiveness, high loads and variable flow ratein normal and maximum conditions.

    By Advanced Cyclone Systems, S. A. based in Porto, PORTUGAL.

  • Premium

    Miscellaneous solutions for the food & beverage industry

    The food manufacturing industry contains companies involved in processing raw food materials, packaging, and distributing them. This includes fresh, prepared foods as well as packaged foods. CECO delivers proven products and systems for a wide range of emission control, filtration and fluid handling challenges including volatile organic compound (VOC) abatement; mist elimination; acid gas scrubbing; dry particulate filtration; industrial dust; fume, mist and air handling systems; fluid handling; filtration; and...

    By CECO Environmental based in Dallas, TEXAS (USA).

  • Premium

    Industrial chemical solutions for plastics and rubber products industry

    The plastics and rubber products industry involves facilities that manufacture tires, rubber and plastic hosing, belts, gaskets and seals, rubber goods, plastic film and sheet, laminated plastic products and plastic pipe, bottles, foam products and assorted plastic products. CECO commonly deliver proven products and systems for a wide range of emission control, air filtration and fluid handling challenges, including VOC abatement; dry particulate filtration; industrial dust, fume, mist and air handling systems;...

    By CECO Environmental based in Dallas, TEXAS (USA).

  • Premium

    Industrial manufacturing solutions for the furniture industry

    The furniture manufacturing industry includes facilities that manufacture household furniture; office furniture; mattresses, shades, and blinds; custom architectural woodwork and millwork; and institutional furniture. CECO offers a wide range of safe, clean and efficient systems and solutions designed to meet a variety of air emissions and pollution control challenges, including mist elimination; volatile organic compound (VOC) abatement; acid gas scrubbing; dry particulate filtration; and industrial dust, fume,...

    By CECO Environmental based in Dallas, TEXAS (USA).

  • Premium

    Industrial manufacturing solutions for the printing industry

    The printing industry covers facilities engaged in newspaper publishing and printing, lithographic printing, gravure printing and commercial printing. Ink production companies manufacture inkjet cartridges and printing and inkjet inks, including lithographic, flexographic, gravure and letterpress inks. These products are sold to commercial printers, newspaper and magazine printers, office supplies wholesalers and screen printers. There is a need to address a wide range of emission control, air filtration and...

    By CECO Environmental based in Dallas, TEXAS (USA).

  • Premium

    Emission control solutions for pyrolisis, incineration and gasification sector

    For PM emission control in very high temperature exhaust streams ( >600ºC ), such as gasification, pyrolysis and incineration, traditional bag filters following temperature exchangers, ceramic filters, or scrubbers are used as end stage dedusters. For most arrangements, a primary high temperature separator, namely a cyclone, is important to reduce as much ash and char as possible. A good efficiency is important to reduce concentration of solids to the final stage dedusters, avoiding plugging of scrubbers...

    By Advanced Cyclone Systems, S. A. based in Porto, PORTUGAL.

  • Premium

    Emission control solutions for oil & gas industry

    In Fluid Catalytic Cracking (FCC)processes, widely used in oil refineries, the separation and recovery of powder catalysts is a major concern. Particularly, the concentration of catalyst after the FCC regenerator is usually over 150 mg/Nm3. Since these levels of emissions didn`t represent any environmental harm in the past, they were not controlled by any separator or filter. Plant managers main concern was to clean a fraction of the gas to produce energy in a Turbo Expander, or similar, while concentrating the...

    By Advanced Cyclone Systems, S. A. based in Porto, PORTUGAL.

  • Premium

    Emission control & air dedusting for Fertilizers

    The recovery of fertilizers typically after drying tunnels or drum dryers is associated with a high load of particulates and very humid gas streams. The recovery of these products is commonly performed by dryer cyclones as they allow for a direct powder capture and avoid filter clogging due to condensation. Arrangements with cyclones and/or with bag filters are usual in the industry.

    By Advanced Cyclone Systems, S. A. based in Porto, PORTUGAL.

  • Premium

    Industrial manufacturing solutions for the metal plating line sector

    The metal plating line is the part of the metal finishing process where metal is applied to a substrate. Metal plating involves many complex processes related to reducing contamination of the process bath; ensuring regular monitoring of bath chemistry; wetting agents; anodes; purified water; ventilation and exhaust systems; acid solution regeneration; and spent acid bath reuse.

    By CECO Environmental based in Dallas, TEXAS (USA).

  • Premium

    Emission control solutions for fuel oil combustion sector

    For PM emission control in high temperature exhaust streams, such as those from fuel oil boilers, common dedusters like Bag filters, have very high maintenance costs. The diesel and fuel oil fly ash can be quite sticky and clog to filter elements, which can be minimized with costly protection reagents or frequent filter elements changes. Flue gas cooling is needed in front of the filter when temperatures are higher than 200 ºC.

    By Advanced Cyclone Systems, S. A. based in Porto, PORTUGAL.

  • Premium

    Emission control solutions for steel and ferroalloys sector

    Steel and ferroalloysmanufacturing processes involve high temperature exhaust streams, often at more than 900ºC. Typically, the gas flows from the furnace (usually electric arch type) and goes into a gas conditioning tower to cool down below 200ºC so that it can be treated by a Bag Filter. It`s also common to have ESP´s as end dedusters that can be preceded by a multicyclone serving as pre-separators.

    By Advanced Cyclone Systems, S. A. based in Porto, PORTUGAL.

  • Premium

    Building solutions for the asphalt manufacturing sector

    In asphalt manufacturing, the product is typically processed from the heaviest part of petroleum. Emissions from oil refineries and asphalt manufacturers are tightly controlled using technologies that recover and re-use the particulates in the heating process. This reduces environmental emissions and also increases the efficiency of the heating process.

    By CECO Environmental based in Dallas, TEXAS (USA).

  • Premium

    Building solutions for the gypsum manufacturing sector

    The chemical composition of gypsum is calcium sulfate dihydrate (CaSO4·2H2O). There are two types of gypsum: natural gypsum and Flue-Gas Desulfurization (FGD) gypsum. FGD gypsum is a by-product of desulfurization of flue gas from the stacks of fossil-fueled power plants, and the emissions captured from smoke stacks are purified into a hard substance and manufactured into gypsum. FGD gypsum has been used to manufacture gypsum board for more than 30 years.

    By CECO Environmental based in Dallas, TEXAS (USA).

  • Premium

    Industrial chemical solutions for plastics and rubber products industry

    The plastics and rubber products industry involves facilities that manufacture tires, rubber and plastic hosing, belts, gaskets and seals, rubber goods, plastic film and sheet, laminated plastic products and plastic pipe, bottles, foam products and assorted plastic products. CECO commonly deliver proven products and systems for a wide range of emission control, air filtration and fluid handling challenges, including VOC abatement; dry particulate filtration; industrial dust, fume, mist and air handling systems;...

    By CECO Environmental based in Dallas, TEXAS (USA).

  • Premium

    Emission control solutions for biomass and coal combustion sector

    For particulate matter (PM) emission control in high temperature exhaust streams, such as those from biomass or coal boilers and heaters, common dedusters such as cyclones and multicyclones are not able to comply with current emission limits. This is mainly due to their low efficiency, particularly for small particles (less than 10µm). In order to meet emission limits this usually requires an additional investment in a final stage deduster. Bag filters (BF) are very efficient dedusters. They can also be...

    By Advanced Cyclone Systems, S. A. based in Porto, PORTUGAL.

  • Premium

    Air pollution, emission and process monitoring systems for food & pharma

    High accuracy measurement and reliability in monitoring instrumentation is called for by Food and Pharmaceutical Processes. ENVEA’s unique capabilities allow the observation and control of many of the manufacturing functions found in these industries. From the measurement and control of emitted dust from dryer filter plant to the non-intrusive, solid state measurement of powder mass flow and the monitoring of process gas quality, ENVEA instrumentation provides Plant Operators with the opportunity to fine...

    By ENVEA based in Poissy, FRANCE.

  • Premium

    Engineered clean air solutions for lean manufacturing applications

    Whether you call it lean manufacturing or Just-in-Time (JIT) manufacturing, eliminating waste isn’t a new concept for bottom-line minded manufacturers. But, it isn’t easy to reduce operating costs while creating more value for your customers. This is especially the case for welding, sanding, painting, or other processes that produce harmful air contaminants and create production bottlenecks for larger construction projects. What if you had a portable, clean air solution to protect your employees from...

    By Duroair Technologies Inc. based in Niagara Falls, ONTARIO (CANADA).

  • Premium

    Engineered clean air solutions for stone cutting applications

    Stone cutting is one of the messiest operations in manufacturing – and the most hazardous. When it comes to producing dust, stone cutting generates clouds of dust that is far from harmless. Most concrete, masonry, and stone contain sand that is made of quartz and creates crystalline silica when cut. The inhalation of silica particles can scar the lungs or even lead to silicosis. Of course, you don’t need OSHA and NIOSH to tell you that silica dust is dangerous. What if you had a portable clean air...

    By Duroair Technologies Inc. based in Niagara Falls, ONTARIO (CANADA).

  • Premium

    Application package FLUXANA Slag

    This application package is a `ready to go` calibration kit for xrf instruments. The analysis of slags in the metal industry delivers important information about the production process. FLUXANA has developed a fusion slag method which allows the direct analysis of most common slags. Elements of interest and calibrated concentration ranges can be selected individually by the customer. The same application program can also be easily adapted to the analysis of different filter dusts (see CS-0023).

    By Fluxana GmbH Co. KG based in Bedburg-Hau, GERMANY.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you