Emissions Reductions Applications

22 Results found
Only show results in Virginia?
OK
  • Category: Air & Climate ×

  • Subcategory: Emissions Reductions ×

ENMAT Energy For Android -

by ENMAT Monitoring and Targeting - Envantage Ltd     based in Manchester, UNITED KINGDOM

For more information oplease visit the Google Play Store: https://play.google.com/store/apps/details?id=com.appsbar.ENMATEnergy415754&feature=nav_result#?t=W251bGwsMSwxLDMsImNvbS5hcHBzYmFyLkVOTUFURW5lcmd5NDE1NzU0Il0. Description Please Contact ENMAT on 0161 448 7722 for registration information. Free for business users with Half Hourly Metering. ENMAT provides affordable Energy Monitoring & Targeting software that helps companies to monitor and reduce Carbon Emissions. Our software can be used to set the targets you want to achieve at an affordable price. ENMAT Energy is for business use only.

Flaring Solutions for Gas Processing Facilities

by ABUTEC LLC     based in Kennesaw, GEORGIA (US) (USA)

ABUTEC’s proprietary technology was designed to provide cost-competitive solutions and the industry’s lowest operating costs and cost of ownership. Our uniquely engineered burner system offers a significant reduction in make-up fuel over premixed surface combustion systems, thermal oxidizers or traditional pipe flares. In addition, we meet EPA requirements for 40 CFR 60.18 and local BACT (Best Available Control Technology) and MACT (Maximum Achievable Control Technology) at the state and local levels. We will perform a complete return-on-investment analysis for you while showing you your total cost of ownership.

Measurement solution for Perflurocarbon (PFC) emissions from aluminium industry

by Protea Limited     based in Middlewich, UNITED KINGDOM

The aluminium industry is the major source of perflurocarbon (PFC) emissions to the atmosphere, which are a major contributor to global warming. PFCs have greenhouse gas effects up to 10000 times that of CO2. Emissions have been reduced over the last 20 years, but further reductions are harder to achieve as all the mechanisms for PFC production are not known. In order to better understand the production of PFC on an industrial level, laboratory studies have been carried out using a small scale cell.

Air cleaning system for the higher education areas

by Dynamic Air Quality Solutions     based in Princeton, NEW JERSEY (USA)

Dynamic Air Cleaners are an ideal indoor air quality solution for schools, colleges and universities. Without sacrificing budgets, higher education institutions can utilize these highly-versatile air cleaners to lower energy costs and establish greener, healthier learning environments for teachers and students. A report from The American Institute of Architects, The Redford Center, ICLEI USA – Local Governments for Sustainability and the U.S. Green Building Council (USGBC) estimates inefficiency costs the average school $100,000 each year. The report also states 14 million students attend schools considered below standard or dangerous, with more than 15,000 schools having air deemed unsafe to breathe. Generating a return on investment in three to five years, Dynamic Air Cleaners remove dangerous airborne particles that other air cleaning systems miss, including odors, smoke, bacteria, allergens, fine dust, mold and pollen, without producing any harmful ozone.

Flaring Solutions for the Mine Gas Industry

by ABUTEC LLC     based in Kennesaw, GEORGIA (US) (USA)

ABUTEC manufactures and services low emission, low NOx mine gas incinerators (i.e. enclosed flares) for the mine gas industry. We specialize in offering compact solutions and price competitive equipment, whether you are upgrading due to new regulations, evaluating a gas-to-energy project or looking for a green technology to take advantage of tax credits. We specifically size and design for your unique mine gas needs with flares ranging in size from 10 SCFM up to 6,000 SCFM. All ABUTEC flares and solutions meet or exceed EPA regulations and are BACT-approved. ABUTEC installed the first mine gas incinerator in the U.S. and is the only company to provide proven carbon credit solutions.

Flaring Solutions for the Petrochemical & Refinery Industry

by ABUTEC LLC     based in Kennesaw, GEORGIA (US) (USA)

ABUTEC’s goal in the petrochemical and refinery industry is to save you money. ABUTEC’s vapor combustor and enclosed flare line offers flexible and resilient burner technology to handle heavy hydrocarbon gases down to low quality or inert gases. We will save you money on capital costs and we will offer you a very fast payback (as low as 2 months) based on reducing the amount of make-up fuel and pilot gas required. This revolutionary technology is designed for you!

Ethanol and Biofuels

by Babcock & Wilcox MEGTEC     based in De Pere, WISCONSIN (USA)

Controlling the VOCs and CO emissions produced in the feed dryers (wet and dry milling), coupled with the particulate matter being introduced and the need for the reduction of NOx are just the start of having a successful abatement solution. The challenges of smooth pressure control that reduces dryer fluctuations and plug resistant media that lessen the frequency of bake-outs are also part of a successful abatement system and we have the solutions. Our engineered oxidation systems provide reliable performance with minimal maintenance requirements. Externally accessible valve bearings and other critical components are kept out of the corrosive moisture-laden streams extending the life of the equipment and facilitate maintenance intervals. Our simple oxidizer designs control your emissions with minimal facility intervention and allow us to provide you with reliable and dependable equipment.

Odor control for rubber tyre production

by Aerox B.V.     based in Vleuten, NETHERLANDS

The production of rubber tyres consists of several processes that generate odours. These processes emit a large airflow with a typical rubber smell, which is likely to cause problems in the wide area of the factory.

Air pollution control for the coating industry

by Anguil Environmental Systems, Inc.     based in Milwaukee, WISCONSIN (USA)

Whether you are flow coating miniblinds, magnetic tape, aluminum cans, coils, wire or paper, Anguil`s 35 years of pollution control experience has provided unique insight into the wide variety of applications in the coating industry. Anguil`s experience leads directly to savings for our customers. Determining your solution begins by quantifying the problem with a thorough assessment of your emissions. Utilizing proven principles of design engineering, your system will evolve to incorporate air volume reduction strategies to reduce system size, meaning a reduction in both capital and operating costs. This can be achieved by recirculating the air in drying ovens or by cascading areas of lower VOC concentration to areas of higher VOC concentration.

DeNox Systems

by NEWLAND ENTECH EUROPE     based in VILLAVICIOSA DE ODON, SPAIN

Newland Entech Europe could reducing NOx emissions adding ozone to the flue gas before it enters the chimney. The ozone convert the NOx to N2O5, which it is high soluble in water and is easily removed from the flue gas by a scrubber.

motor control & energy efficiency for mine lifting machine

by V&T Technologies Co., Ltd.     based in shenzhen, CHINA

Mine resource exploitation industry has formed extensive type, high consumption, and high pollution development mode for a long time and has made resource and environment difficult to bear. Therefore it is of all-important strategy significance for mine resource exploitation enterprises to realize energy conservation and emission reduction. The hoist is a conveyor which is used most extensively in mine and is simply classified as single hook type and dual hook type.

Vacuum systems in residential areas

by Envac AB     based in Stockholm, SWEDEN

As waste volumes continue to grow, more and more stringent demands are being made of waste handling with regard to hygiene and the environment. The Envac vacuum system for waste handling in residential areas is a long-term investment offering both financial and environmental benefits, as well as other added value.

Energy management

by Perillon Software Inc.     based in Acton, MASSACHUSETTS (USA)

With energy costs skyrocketing, companies are looking for ways to optimize energy usage and cut costs, but maintain production output. Companies now capture details of energy use, such as peak and non-peak use and type of fuel used— natural gas, steam, coal, etc. There are different programs such as Energy Star that companies are using for guidance and reporting.

Flaring Solutions for the CDM + Kyoto Protocol

by ABUTEC LLC     based in Kennesaw, GEORGIA (US) (USA)

ABUTEC specializes in providing advanced technology for the CDM initiative and for carbon credit projects in the landfill and waste water industries. The Kyoto Protocol is an international agreement linked to the United Nations Framework Convention on Climate Change, which sets internationally binding emission reduction targets. There are three mechanisms within the protocol, one being the Clean Development Mechanism (CDM). A CDM project must provide emission reductions that are additional to what would otherwise have occurred.

Environmental monitoring solution for aluminium industry

by Ecotech Pty Ltd     based in Knoxfield, AUSTRALIA

Measurement of particulates, SO2, NOx, fluorides and greenhouse gas emissions from the aluminium industry requires careful selection of instrumentation. Ecotech offers a complete monitoring solution tailored to this industry.

Flaring Solutions for the Biogas Industry - Wastewater Treatment + Anaerobic Digester

by ABUTEC LLC     based in Kennesaw, GEORGIA (US) (USA)

ABUTEC manufactures and services low-emission, low-nitric-oxide enclosed flares for the anaerobic digester and wastewater industries. We offer compact solutions and competitively priced equipment for companies that are upgrading due to new regulations, evaluating a gas-to-energy project or looking for a green technology to work in emergency or shutdown conditions. We specifically size and design our flares for each customer’s unique needs.

Flaring Solutions for Ethanol Loadout

by ABUTEC LLC     based in Kennesaw, GEORGIA (US) (USA)

ABUTEC’s proprietary technology was designed to provide cost competitive solutions and the industry’s lowest operating costs and cost of ownership. Our uniquely engineered burner system offers a 33% reduction in make-up fuel over premixed surface combustion systems or traditional nozzle burners. In addition, we meet state and federal requirements for 40 CFR 60.18 and local BACT (Best Available Control Technology) and MACT (Maximum Achievable Control Technology). Whether you are looking for vapor combustors, enclosed flares, ethanol loadout flares, truck loadout flares, loading terminal flares, emergency flares, or marketing terminal flares, contact us for reliable, safe solutions.

Emission control & air dedusting for fuel oil boilers

by Advanced Cyclone Systems, S. A.     based in Porto, PORTUGAL

For PM emission control in high temperature exhaust streams, such as fuel oil boilers, usual dedusters such as bag filters are very maintenance demanding. Particularly, diesel and fuel particulates are very sticky and clog to filter elements, unless protection reagents are used. Flue gas cooling is also needed in front of the filter when temperatures are higher than 200 ºC. On the other hand, regular cyclones and multicyclones are frequently not able to reduce emissions to present emission limits.

Water Testing for Environmental Applications

by Myron L Company     based in Carlsbad, CALIFORNIA (USA)

Keeping the water in our lakes, rivers, and streams clean requires monitoring of water quality at many points as it gradually makes its way from its source to our oceans. Over the years ever increasing environmental concerns and regulations have heightened the need for increased diligence and tighter restrictions on wastewater quality. Control of water pollution was once concerned mainly with treating wastewater before it was discharged from a manufacturing facility into the nation`s waterways. Today, in many cases, there are restrictions on wastewater that is discharged to city sewer systems or to other publicly owned treatment facilities. Many jurisdictions even restrict or regulate the runoff of stormwater — affecting not only industrial and commercial land, but also residential properties as well.

Air pollution control for the printing, laminating & converting industry

by Anguil Environmental Systems, Inc.     based in Milwaukee, WISCONSIN (USA)

Achieving cost effective local regulatory compliance in the printing and converting industry requires a complete understanding of both regulatory standards and the printing process. Through experience, Anguil has developed unparalleled expertise in meeting your unique requirements. We understand the effects of water versus solvent-based inks on the line, elimination of odors and toxic fumes from dryers and oven tunnel exhausts, and the capture of fugitive emissions. Over 300 successful printing installations worldwide, in plants just like yours, have shown Anguil to be a Proven Solutions Provider.

Need help finding the right suppliers?

Let the XPRTs do the work for you