Only show results available in Virginia? Ok

Emissions Reductions equipment for Air and Climate

  • Triase+ - Model SPAi - Single Wafer Plasma Treatment System

    TEL developed the Triase+ SPAi in response to market needs for high productivity and a reduced environmental load. The TEL Trias SPA (slot plane antenna) Series has an excellent production record at semiconductor mass-production facilities around the world and a proven track record for high reliability. The SPA plasma-generation technology that ...

    By Tokyo Electron Ltd based in Austin, TEXAS (USA). from Single Wafer Plasma Treatment System Product line

  • KTI - Emission Reduction System

    Complete turnkey services are available — Design, Engineering, Procurement, Construction, and Commissioning for any Emission Reduction project, including: Process Furnaces (Crude, Vacuum, Coker, CCR, Charge Heaters). Gas Turbines - Simple and Combined Cycle. Boilers and IC Engines. Reformer Furnaces. Ethylene & EDC Crackers. Steam ...

    By KTI Kinetics Technology International based in Houston, TEXAS (USA).

  • NOVOC - Model 3000 - Vinyl Ester Resin

    NOVOC 3000 is a high solids, zero HAP’s, iso-polyester resin developed by NOVOC Performance Resins, LLC to reduce emissions in all types of manufacturing. The resin system emits less than 1% VOC’s. NOVOC 30000 provides solid physical properties in a zero HAP’s package, specifically geared to the resin transfer molding or vacuum ...

    By Andara, LLC based in Sheboygan, WISCONSIN (USA). from Vinyl Ester Resin Product line

  • CENTROX - VOC and Odour Emission Reduction Reactor

    CentrOx is an industrial particle, VOC and odour emission reduction solution for customers within industrial food processing, energy production, plastic and rubber manufacturing, painting and paint manufacturing and other industrial processes generating airborne emissions of particles, VOCs and odour.

    By Centriair AB based in Sävedalen,, SWEDEN.

  • The Cerenzie Process

    The Cerenzie Process is a proven, cost effective GHG reduction technology which has two patents pending that are owned by GGSSI. This technology uses a combination of pure oxygen combustion, membrane separation and ozonation scrubbing mechanisms. The Process is unique in that, compared to competing technologies, it costs less to implement and it ...

    By Greenhouse Gas Separation Systems Inc. (GGSSI) based in Calgary, ALBERTA (CANADA).

  • HOTBOX - Model MKH 100 - Compact Heating Units

    The most compact unit among the mobile heating units.. As intermediate solution for alterations, repairs or shutdown of your heat generating system.The HOTBOX is an entirely self-sufficient heating unit including all components necessary for operation. Supply includes a flue system together with fitting connecting hoses and couplings. This model ...

    By Hotmobil Deutschland GmbH based in Gott madingen, GERMANY. from Compact Heating Units Product line

  • Model AR2300 - Nano Fluid System Cleaner

    AR2300 non-aggressively removes fluid system carbon, varnish and sludge in engines, gearboxes, automatic transmissions, differentials and power steering units without creating downtime. Install in oil and in 3-4000 miles the engine will be free of deposits allowing for a more efficient operating system. Use as a first step in high milage engines ...

    By Evergreen America Inc. based in Wallingford, CONNECTICUT (USA).

  • Model 4150 and 4160 LE - Controllers

    The CVS 4150 and 4160 are pneumatic pressure controllers that utilize a bourdon tube or bellows for sensing vapor, liquid or gas pressure, and differential pressure. The CVS controller can be reconfigured from direct, to reverse acting or vice versa without any additional parts. The CVS 4150LE controller uses up to 6 time less fuel gas than a ...

    By CVS Controls Ltd. based in Edmonton, ALBERTA (CANADA). from Controllers Product line

  • Composite Precleaners

    Enginaire precleaners are designed to remove most of the contaminants from the air that feeds the engine. The advantages of removing the contaminants are extended filter life, improved fuel economy, reduced emissions, reduced maintenance costs, AND LONGER ENGINE LIFE. The Enginaire precleaner is designed to operate at a maximum contaminant ...

    By Enginaire Clean Air Systems based in Janesville, WISCONSIN (USA). from Composite Precleaners Product line

  • Stratis - Model LCV220 - Variable Speed Fan Drives

    LCV220 is equipped with a rear mounted cable harness and the fan is uniquely installed on the front of the fan drive to increase airflow and improve cooling. The integral fan speed sensor provides close loop control. An optimized magnetic design speeds up reaction time for better modulation and cooling. Plus, the fan drive’s housing and ...

    By Horton, Inc. based in Roseville, MINNESOTA (USA). from Variable Speed Fan Drives Product line

  • AQUACON AD - REDUCE EMISSIONS AT THE SOURCE-VELCON

    AQUACON diesel filter from Velcon are designed to remove both particulate and water contaminants from diesel and biodisel fuels thus reducing the emissions at the source

    By Industrial Projects Ltd based in Kirkland, QUEBEC (CANADA).

  • Project Assessment Services

    Climate Bridge has developed a thorough Project Assessment process to evaluate project quality, based on its experience of developing over 100 CDM projects.

    By Climate Bridge based in London, UNITED KINGDOM. from Project Assessment Services Product line

  • Gasoil - Enhancement Reagent

    SOL POWER Plus Fuel is an Enhancement Reagent that hydro-oxygenates diesel fuels. When mixed at a rate of 0.25%, it improves engine performance, exploiting the fuel’s properties to the maximum. This factor entails a major reduction in consumption, leading to a lower amount of unburnt fuel, and likewise reducing pollution rates and ...

    By Sol Power Plus S.L based in Salamanca, SPAIN. from Enhancement Reagent Product line

  • For. Tec. - Emission Reduction System

    Attention for environment is absolute, therefore Fortec. is always looking for new solutions for reduction of emissions coming out into the atmosphere. All incinerators, furnished with special systems, guarantee a gas emission into the atmosphere as by law enacted.

    By For. Tec. Forniture Tecnologiche S.r.l. based in Sparanise (CE), ITALY. from Emission Reduction System Product line

  • Euro - Model IV-V - Mufflers

    SCR-PM-DOC coated ceramic and metallic catalysts. High heat absorption and compensation capability insulation mats. High density ''wire mash''. High life time and high resistance against ad blue, austenitic stainless steel shelling. %100 direct fit. High emission reduction and fuel economy. No maintenance.

    By Hobi Egzoz based in İkitelli, TURKEY.

  • Composite - Fan blades

    GKN Aerospace’s development of composite fan blades is based on our position as the industry leader in composite technology. Our design expertise, process development capability and materials knowledge have allowed us to taking a lead role on the Environmental Lightweight Fan (ELF) research program along with our partner Rolls-Royce.

    By GKN Land Systems based in Redditch, Worcestershire, UNITED KINGDOM. from Fan blades Product line

  • ts-systemfilter - Vacuum Operation

    A connection A (cover and connection piece for vacuum operation) is required to operate a filter apparatus under vacuum conditions. It can also be used to reduce the sound emission of the regeneration impulse.

    By ts-systemfilter gmbh based in Ahorn-Berolzheim, GERMANY. from Vacuum Operation Product line

  • HFC Solutions Technologies

    Building on its expertise in ODS destruction, EOS has expanded its efforts to mitigate refrigerant emissions to include HFCs. While HFC’s do not deplete the earth’s protective ozone layer, they are powerful greenhouse gases (GHGs), which, under business-as-usual are expected to be a major contributor to climate change.

    By EOS Climate based in San Francisco, CALIFORNIA (USA).

  • CFC Solutions for Reducing Refrigerant Emissions

    EOS Climate is a pioneer in developing market-based solutions to reduce emissions of high global warming gases and driving the transition to climate-friendly technologies. To learn about partnering with EOS and earning money for CFCs.

    By EOS Climate based in San Francisco, CALIFORNIA (USA).

  • Model X1-R - Lean Fuel Burn to reduce Emission

    Gii Group is the proud and exclusive distributor of X1-R and Viscon Advanced Lean Burn Engine Additives in Canada that possess a product line up of some of the most advanced additives ever produced for the combustion engine marketplace. Lean Burn engine additives themselves have gained some of the highest recognition in their respective ...

    By Green Industry Innovations Group based in ONTARIO (CANADA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you