Exhaust Gas Monitoring News

  • ISO Publishes Measurement Technique Matrix for Characterization of Nano-Objects

    The International Organization for Standardization (ISO) recently published ISO/TR 18196:2016, “Nanotechnologies — Measurement technique matrix for the characterization of nano-objects.” The document provides a matrix intended to guide users to ...


    By Bergeson & Campbell, P.C.

  • New F900 Carbon Monoxide Exhaust Analyzer

    The NEW F900 Carbon Monoxide Exhaust Analyzer is ideal for accurately measuring CO from Forklifts & Small Engines for CO Safety Testing, Compliance Testing, and Engine Tuning & Maintenance.  The F900 ...

  • New Five Gas Exhaust Analyzer Released

    The NEW F5000-5GAS exhaust analyzer is a complete portable tool for automotive & forklift emissions monitoring. The F5000-5GAS is ideal for performing engine tuning & maintenance, pre-compliance verification, and vehicle diagnostics. FIVE GAS Exhaust Analyzer High Accuracy NDIR Sensors: CO, CO2, HC Electrochemical Sensors: O2, NO/NOx ...

  • HORIBA launches OBS-ONE-PN for analyzing solid particle concentration

    “By 2017, RDE tests will be a mandatory part of the type approval of light duty vehicles“, says Joel Danzer, European Product Manager Emission Engineering at HORIBA Automotive Test Systems. “At HORIBA, it is always our goal to help our customers to fulfil demanding regulations. With the OBS-ONE series, we offer them an ideal solution for RDE measurements.” ...


    By HORIBA Europe GmbH

  • Concentrated competence

    The advanced test center extends the scope at the HORIBA site in Oberursel, Germany. Technology and know-how all from one supplier at the Oberursel site Oberursel as the headquarters of HORIBA Europe GmbH is also the location of a Test Center equipped for a wide range of highly complex analyses as well as a modern training center. For over ten years now, HORIBA has ...


    By HORIBA Europe GmbH

  • Keep an eye on everything with LabMonitoring

    HORIBA’s newly developed data preparation tool allows users to extensively display and document the interplay of different HORIBA ONE PLATFORM devices as well as to influence the processes with regard to quality control. Growing challenges with regard to environmental policy have profoundly changed the demands made on vehicle and engine emissions measurement in the last few years. For ...


    By HORIBA Europe GmbH

  • IONICON launches Autosampler for high-throughput PTR-MS measurements

    The real-time measuring capability of a PTR-MS trace gas analyzer is ideally suited for continuous VOC monitoring but also for rapid analysis of discrete samples within seconds. The new IONICON autosampler for PTR-MS enables automated screening of hundreds of sample vials. This fully ...


    By Ionicon Analytik Ges.m.b.H.

  • U-ETUC campaign against workplace cancer

    The European Trade Union Confederation has launched a campaign to address workplace use of carcinogens and work-related cancer. Amongst other measures the ETUI has published a proposal for more binding OELs at EU level. The ETUC’s list of 50 includes diesel engine exhaust, leather dust, formaldehyde, refractory ceramic fibres, respiratory crystalline silica, cadmium and cadmium compounds, ...

  • USA Engines manufacturer renews its confidence in Environnement S.A.`s EGAS 2M monitoring systems

    Fully satisfied with its 2 turnkey EGAS 2M Systems provided by Environnement S.A in 2014, a leading Engine Manufacturer in the United States places a new order for a new EGAS turnkey cabinet. The EGAS 2M engine exhaust gas analysis system is the only system on the market allowing the measurement of 1 or 2 independent streams in a single analysis cabinet. Designed to measure ...


    By Environnement S.A

  • Complying with emissions regulations: calculating the acid plume from ships’ desulphurisation equipment

    Marine diesel contains sulphur compounds, which generate sulphur oxide (SOx) pollution and acid rain. Ships can use mitigating technologies to reduce their SOx emissions, but these can also have a negative environmental impact. The International Maritime Organization (IMO) introduced stringent legislation to control these, aspects of which are incorporated into EU policy. This study examined the ...

  • Accelerated vehicle vibration measurements

    To make triaxial measurements easier for automotive and industrial engineers, Brüel & Kjær has created a new charge accelerometer, which enables fast and reliable high temperature tests - Type 4527‐C. The 4527‐C only needs one cable to link up with the three output channels on a data analyzer system, reducing set up time during tests. With an operational temperature up ...

  • Volkswagen – EMIT can account for real-world diesel emissions

    Analysis of measurements from the last decade throughout Europe have demonstrated that ambient NOx and NO2concentrations are not decreasing in line with the published emission factors (Carslaw et al. 2011). On-road vehicle testing in the UK has highlighted that ...

  • Just one in 10 new diesel cars is clean as the legal limit, report finds

    Every major car manufacturer is selling diesel cars that fail to meet EU air pollution limits on the road in Europe, according to data obtained by sustainable transport group Transport & Environment (T&E). All new diesel cars should have met the Euro 6 auto emissions standard from 1 September ...

  • Real-time car exhaust monitoring with IONICON PTR-MS

    IONICON PTR-MS is known for being an analytical technique to quantify hydrocarbons and VOCs with high sensitivity and in real-time. The capability to monitor emissions in real-time is particularly useful for recording the fast changing conditions in the combustion process and to assess the impact of control technologies. Especially the initial cold start phase in cars, which ...


    By Ionicon Analytik Ges.m.b.H.

  • HORIBA at the Testing Expo 2015 Europe in Stuttgart

    HORIBA Automotive Test Systems (ATS), a market leader for exhaust gas analysis, engine, powertrain and vehicle test systems, presents its new exhibition concept at this year's Testing Expo 2015 Europe from June 16 to 18. The new concept includes three main topics and presents HORIBA as a qualified solution partner. The presentation at Booth 1512 in Hall 1 is divided into the fields of ...


    By HORIBA Europe GmbH

  • HORIBA at the Testing Expo 2015 Europe in Stuttgart

    HORIBA Automotive Test Systems (ATS), a market leader for exhaust gas analysis, engine, powertrain and vehicle test systems, presents its new exhibition concept at this year's Testing Expo 2015 Europe from June 16 to 18. The new concept includes three main topics and presents HORIBA as a qualified solution partner. The presentation at Booth 1512 in Hall 1 is divided into the fields of ...


    By HORIBA Europe GmbH

  • HORIBA at the Testing Expo 2015 Europe in Stuttgart

    HORIBA Automotive Test Systems (ATS), a market leader for exhaust gas analysis, engine, powertrain and vehicle test systems, presents its new exhibition concept at this year's Testing Expo 2015 Europe from June 16 to 18. The new concept includes three main topics and presents HORIBA as a qualified solution partner. The presentation at Booth 1512 in Hall 1 is divided into the ...


    By HORIBA Europe GmbH

  • HORIBA co-operates with the Universitat Politècnica de València (UPV)

    HORIBA is cooperating with the Universitat Politècnica de València (UPV) on the joint development of a mobile altitude simulation system. The new joint solution will be available in September 2015. Requirements of the market Due to the requirements of global production for global markets, OEMs require a high transparency and comparability of the development process ...


    By HORIBA Europe GmbH

  • Emissions regulations under control at all times

    All manufacturers in the automotive segment face the challenges posed by more stringent regulations for nitrogen emissions (NOx emissions) when developing their engines and NOx after treatment systems. A number of demands made on the real-time measurement of these emissions are directly connected with the regulations. The engine exhaust gas analyzer MEXA-ONE-QL-NX, which can be integrated into ...


    By HORIBA Europe GmbH

  • Measurment of pH in Low Conductivity Water

    Measuring pH of pure water. The measurement of pure water pH can be one of the quickest indicators of process contamination in the production or distribution of pure water. The presence of gaseous contaminants such as air or carbon dioxide will shift the pH of the pure water, indicating air or gas intrusion into the process line. The exhaustion of resin beds used to prepare ...


    By Camlab Limited

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you