Exhaust Removal Articles

  • Odour control at municipal refuse site - Case Study

    These three RTOs remove the odour from the exhaust air at the Reliance Street Plant in Manchester. ...

  • VOC Abatement Technology Saves on Operating Costs for Aerospace Paint Finishing

    For over 10 years, a Canadian aircraft manufacturer has saved over $500,000 annually in fuel and electricity consumption by using Munters rotor concentrators to control solvent emissions from its facility’s paint booths. Before purchasing Munters equipment in 2002, the manufacturer struggled with the inconvenience of having their aircraft systems flown to be painted in subcontracted paint ...


    By Munters

  • Paint & Coatings Manufacturer Selects CPI RTO

    Catalytic Products International (CPI) recently completed the installation of a new TRITON Series Regenerative Thermal Oxidizer (RTO) to a Midwest USA location of a global paints and coatings manufacturer for the abatement of Volatile Organic Compounds (VOCs). ...

  • Diesel Particulate Filters in the City of London - Case Study

    The catalysed wall flow soot filter was designed and installed in the fourth quarter of 2008 to treat the Particulate Matter (PM), Volatile Organic Compounds (VOCs) & Carbon Monoxide (CO) in the exhaust gases from the outlet of an MTU 12V000G23E emergency generator installed in the basement in the financial district London EC2R. AirProtekt Catalysed Wallflow Particulate Filter is a system ...


    By AirProtekt Limited

  • If it doesn’t exist, then we will create it

    Our customer wanted a multi-chambered cat cremation unit.  Our designers said … OK! Very often the product that a customer requires simply doesn’t exist.  It could be a groundbreaking idea that they have had, or a novel concept that they want to incorporate into their business.  Usually ideas such as these are totally innovative and nothing quite like them is ...

  • Total Exhaust Biosafety Cabinet Upgrade at Research Facility Provides Significant Energy Savings

    When Harvard’s Biology Research Infrastructure (BRI) facility opened in 2006, they required four biological safety cabinets to provide primary containment during animal procedures. In the selection process, workspace containment and isolation requirements, operation modes for non-use periods and maintenance, building integration, and the energy burden to the building system were all ...


    By The Baker Company

  • Abrasives case study - Essroc Materials, Inc.

    Plugging, Surging and Wear-Through Virtually Eliminated by Smart Elbows® At Essroc Materials, Inc., formerly Coplay Cement, plugging and elbow wear in pneumatic conveying lines caused unnecessary downtime and repair expense. The Frederick, MD, facility is a wet-process cement plant that produces 350,000 to 400,000 tons of cement a year using two 400-foot-long rotary ...


    By HammerTek Corporation

  • Power Case Study - PECO Energy

    Smart Elbow® prevents magnesium oxide leakage at coal-fired generating plant As featured on Today's Environment on the Discovery Channel, and in the September '95 issue of Powder & Bulk Engineering. Subject PECO Energy Company's Eddystone Generating Plant, Philadelphia, PA area Situation In order to ...


    By HammerTek Corporation

  • Choosing a Cyclone Collector

    CYCLONE COLLECTORS Many of us have seen the large funnel shaped mass of metal sitting outside of a manufacturing facility, school or processing plant. These are cyclone dust collectors and they come in many shapes and sizes. If you are curious how they work or are wondering which one will be the right one for your process, read on. HOW THEY WORK Cyclone dust ...


    By ProVent, LLC

  • Local-scale recovery of wastewater nitrogen for edible plant growth

    An anaerobic/ion exchange (AN-IX) system was developed for recovery and reuse of wastewater nitrogen at point-of-origin. AN-IX combines upflow solids blanket anaerobic treatment with ammonium ion adsorption onto granular natural zeolite. AN-IX operates passively and without energy input. A 57 L empty-bed prototype was operated for 355 days on wastewater primary effluent. Total nitrogen removal ...


    By IWA Publishing

  • Ducted or Ductless Fume Hoods? Is this the real issue?

    Most laboratories will need some form of fume cabinet at some point. The type of cabinet is usually the starting point of the process, and the choice of either ductless or ducted cabinet is made. With the ever increasing need to save money and to be environmentally responsible there are other considerations that need to be explored before a decision can be reached. ...


    By Camlab Limited

  • Case study: Regenerative thermal oxidizers for coffee roasting

    Epcon has extensive experience in designing and building Regenerative Thermal Oxidizers (RTO's) for the Coffee Roasting Industry. The Problem A leader in the Coffee Industry needed equipment to control odor and eliminate VOC's from Coffee Roasting. The company went out seeking the technical solutions and went to several manufacturers to locate the best possible technology. ...


    By Epcon Industrial Systems, LP

  • More to Scrubber Pumps than Meets the Eye

    One component, in particular, needs to be carefully selected to ensure safe and efficient sulphur removal. The time is now Shipowners are having to move fast to change fuel type to distillate fuel or LNG, or to install the exhaust gas cleaning systems (EGC systems) known as scrubbers. They’re reacting to new sulphur emission legislation set to come into force in designated ...


    By DESMI A/S

  • BTC coatings for trouble-free Boiler Operation

    In April 2014, the CastoLab® Division of Eutectic Canada performed an on-site coating contract for a Steel Mill. The work was performed on a critical section of the Fume Extraction Ducting: a series of water cooled tubes which remove heat from the exhaust fumes exiting the drop box. Conveyed within the ducting is hot ash debris which is corrosive and very abrasive. In this particular job, the ...


    By Castolin Eutectic

  • Recuperative Thermal Oxidizers for Coffee Roasting

    Coffee Roasting Company Epcon has extensive experience in designing and building Recuperative Thermal Oxidizers for the Coffee Roasting Industry. The Problem A leader in the Coffee Industry needed equipment to control odor and eliminate VOC's from Coffee Roasting. The company went out seeking the technical solutions and went to several manufacturers to ...


    By Epcon Industrial Systems, LP

  • Removal of vehicle exhaust fumes at fire stations

    The challenge The fire brigade of Kassel (Germany) was looking for three new vehicle exhaust extraction systems. Systems that would remove exhaust fumes very effectively, protecting the fire fighters from hazardous diesel exhaust fumes. Other fire stations within the Kassel region were already provided with extraction systems. The fire brigade of Kassel choose for a fully ...


    By Plymovent Group BV

  • Magnetic Grabber ensures effective exhaust removal

    The challenge The Marshfield Fire & Rescue Department has been using a number of SBT-Pneumatic systems of Plymovent since 2004. The SBT-Pneumatic systems have been removing vehicle exhaust gasses from the emergency vehicles - such as fire trucks and ambulances - inside the service station. The Magnetic Grabber® was installed ...


    By Plymovent Group BV

  • Predicting contamination by the fuel additive cerium oxide engineered nanoparticles within the United Kingdom and the associated risks

    As a fuel additive, cerium oxide nanoparticles may become widely dispersed throughout the environment. Commercial information from the United Kingdom on the use of cerium oxide nanoparticles was used to carry out a modelling and risk assessment exercise. Discharge from exhausts took into account the likely removal by filters fitted to these vehicles. For predicting current soil exposure, ...


    By John Wiley & Sons, Ltd.

  • The Hazards of Being in a Beauty Salon

    There are many health risks associated with the beauty industry due to the chemicals found in the products. We are all affected by these chemicals every time we go to the beauty salon. Many of the products found in these salons are classified as hazardous and extreme caution should be taken into consideration when using these products. They’re made for professional use only; therefore, ...

  • M-Coating – drain & sewer spraylining the economical solution to manhole shaft renovation

    M-Coating – Procedure for renovating a manhole shaft using ERGELIT Kombina KS M-Coating is a new, innovative renovation technique for both round and rectangular drainage shafts from 500mm to 1200mm. It is based on over 15 years of the Hermes company’s experience. Using this centrifuge spray technique, walls of shafts up to 10 metres deep can be coated to a realistic thickness. ...


    By HERMES Technologie Ltd.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you