Only show results available in Connecticut? Ok

Fine Dust services for Air and Climate

  • Premium

    Metal Cutting Solutions

    Bring Safe, Clean Air to Each Metal Cutting Task. From laser and plasma cutting to grinding and sanding, working with metals can produce a toxic cloud of oil mist, fine particulate dust, and fumes that not only threaten your machinery and electronics, but endanger your most valuable assets – your employees. There’s also the risk of ...

    By Duroair Technologies Inc. based in Niagara Falls, ONTARIO (CANADA). from Solutions Service line

  • Lead & Mold

    Lead-based paint products, used from the early nineteenth century, were banned by the federal government. Though health risks to children have been widely publicized, the risk of lead poisoning can affect all ages. While we often hear about children eating paint chips, the dust produced by the lead-based paint is the real danger to the human body. ...

    By Asbestos Corporation of America based in Yonkers, NEW YORK (USA).

  • Secondary (Intermittent) Dusting

    Puffs of dust that are noted in the exhaust of the clean air plenum after each cleaning pulse is a secondary dusting problem. This condition is normal with new filter bags, and should stop after the first several hours of operation.

    By Destex Inc based in Albany, NEW YORK (USA). from Troubleshooting Service line

  • Measurements Services

    Any optimisation work on industrial operations generally starts with an evaluation of the current situation and ends with a similar evaluation of the improved mode of operation. This often includes special measurements to deliver the necessary information on the equipment and systems, the process and the products. We offer a large variety of ...

    By VDEh-Betriebsforschungsinstitut GmbH based in Düsseldorf, GERMANY.

  • Screening & Segregation Services

    Clean Harbors’ screening units segregate spent catalyst and classify material size. Dust and fines from attrition created during the shipping and handling of catalyst are also removed. Our units can easily segregate and class four particle sizes in a single pass prior to loading. By screening the catalyst, broken pieces (chips and fines), ...

    By Clean Harbors based in Norwell, MA, MASSACHUSETTS (USA). from Industrial Services Service line

  • Erkho - Dust Control

    Effective dust control through water atomization, optimal dust control. Erkho dust control by high-pressure atomization: Nebulization is a very affordable and effective way of fighting dust. The very fine mist can be used very well to suppress fine dust and quartz dust, among other things. Our tailor-made solutions enable us to combat dust ...

    By Erkho BV based in Sliedrecht, NETHERLANDS. from Solutions Service line

  • Particulate Monitoring Service

    Particles in the atmosphere consist of either solid or fine liquid droplets. They include,smoke, fumes, dust, flyash,condensed vapours and pollen. Suspended particulates in ambient air serve as a vehicle for organic and inorganic chemical compounds. Unlike gaseous pollutants particulate matter (PM) can be a mixture of different sizes and chemical ...

    By Rotek Environmental Inc. based in Hamilton, ONTARIO (CANADA).

  • Industrial Hygiene

    • Risk assessment and management of dangerous chemical agents (Legislative Decree 81/2008 Title IX). In particular, we deal with the detection of the presence of fine dusts (PM 10 and PM 2.5), Ozone, Formaldehyde, Volatile Organic Compounds (VOC, such as benzene, toluene, ethylbenzene, xylan), Polyaromatic Hydrocarbons PAH, heavy metals (Pb, Cr, ...

    By HSI CONSULTING SRL based in Rome, ITALY.

  • Residential Remediation Services

    Nothing can cause you to lose more sleep than wondering if a silent killer such as asbestos, Zonolite vermiculite or mould lurks in the walls of your family home. These cancer causing construction materials and insulations have been used in home construction over the last 100 years. Asbestos was used as pipe and general insulation since the ...

    By Reitzel Bros. Asbestos Removal Ltd. based in Breslau, ONTARIO (CANADA).

  • Cadmium · air pollution · consultants

    Cadmium is an environmental hazard. Human exposures to environmental cadmium are primarily the result of fossil fuel combustion, phosphate fertilizers, natural sources, iron and steel production, cement production and related activities, non-ferrous metals production, and municipal solid waste incineration. Inhalation of cadmium-containing fumes ...

    By Canarina Environmental Software based in Canary Islands, SPAIN.

  • Dust Assessment Services

    Dust can be generated by a wide variety of activities, including demolition/construction, minerals extraction and waste management.  Dust emissions can cause a nuisance where there is deposition onto surfaces, causing noticeable fouling.  This can lead to complaints from the public to the local authority or regulator. Dust emissions can ...

    By Air Quality Assessments Ltd based in Burnham-on-Sea, UNITED KINGDOM.

  • Air Pollution Control Services

    As consultants in the field of air pollution control we provide expert reports on air quality for local authorities and the private sector. We use established state of the art immission forecast models and assess the results according to the regulations and directives that are applicable to the specific task. We calculate the dispersion and ...

    By ACCON GmbH based in Greifenberg, GERMANY.

  • Waste Oxide Agglomeration

    Significant economic savings can be generated by micro-pelletizing waste oxides, through the raw material replacement and elimination of landfill charges. Micro-pelletized steel mill by-products can be directly inserted into the sintering process, as a substitute for low-grade iron ore or scrap. In conjunction with direct savings, ...

    By Harsco Metals & Minerals based in Leatherhead, UNITED KINGDOM. from Resource Recovery Solutions Service line

  • Gold Recovery Services

    Indocarb GC grades of carbon are manufactured specifically for use in gold recovery applications. Its particle size and pore structure have been specially designed to provide the best adsorption of metal and cyanide complexes from CIP & CIL columns and to ensure maximum gold recovery. GC range of carbons is manufactured from the highest ...

    By IndoCarb Corporation Inc based in Pittsburgh, PENNSYLVANIA (USA).

  • Industrial Air & Gas Cleaning

    Monroe Environmental has treated nearly every type of industrial air stream with our variety of air cleaning equipment. Whether it contains oil mist, dry dust, particulate, soluble pollutants, acid gases, or any other harmful, corrosive, or odorous compound. We offer a broad range of stand-alone equipment as well as complete systems to effectively ...

    By Monroe Environmental Corporation based in Monroe, MICHIGAN (USA). from Industrial Pollution Control Service line

  • Dust Monitoring Equipment Services

    As a company Dust Monitoring Equipment (DustWatch CC) offers many services that fall under our expertise.

    By DustWatch cc based in Sun Valley, SOUTH AFRICA.

  • Process Neutralizes Waste Water Treatment

    This process neutralizes waste water from wet flue gas cleaning or fly ash washing and removes pollutants such as heavy metals, ammonia or persistent organic pollutants (“POP”) from the above waste streams. Since the only remaining components are neutral salts (sodium and calcium chloride),  it can be discharged into the receiving ...

    By Hitachi Zosen Inova AG based in Zurich, SWITZERLAND. from Residue Treatment Service line

  • Asbestos Dust on Wipe Samples

    LCS Laboratory Inc., offers tests for residual asbestos dust on the surface. The tests can be used to monitor cleanliness (housekeeping) of the working surfaces in the area where asbestos can be present.   The test can be also used to assess the extent of asbestos contaminated area. The samples can be collected using micro-vacuuming on ...

    By Laboratory Connection Services (LCS) based in London, ONTARIO (CANADA). from Surface Testing Service line

  • Emission Measurements Industry

    EnviVice provides emission measurements of various components. The next components among other things, can be measured: Combustion components such as volatile hydrocarbons, nitrogen oxides and carbon monoxide; odour, (fine) dust and ammonia. Other components can be measured on request. The results of the measurements can be tested against ...

    By EnviVice based in Lage Mierde, NETHERLANDS.

  • Foam Cleaning Services

    The efficiency of the Air Cooled equipments gets affected over a period of time due to deposition of insects, birds dropping, coke fines, Cement particles, coal dust and other foreign matter and for the efficient working of the coolers, the same have to be removed on a regular basis as they restrict air flow. To achieve the same we have developed ...

    By Arudra Engineers Pvt Ltd based in Chennai, INDIA.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you