Only show results available in Virginia? Ok

Fine Particles equipment for Air and Climate

  • Premium

    CAMSIZER - Digital Image Processing Particle Size and Shape Analysis System

    HORIBA's CAMSIZER Digital Image Processing Particle Size and Shape Analysis System provides rapid and precise particle size and particle shape distributions for dry powders and bulk material in the size range from 20 microns to 30 millimeters. This technique provides a wide variety of information about the sample, from a general size measurement, ...

    By HORIBA Europe GmbH based in Leichlingen, GERMANY.

  • Premium

    TAPI - Model 651 - Ultrafine Particle Monitor

    Ultrafine particle (those less than 100nm, or 0.1µm in size) are produced through combustion activities and are persistent in all ambient air. Concentrations of these tiny particle can be very high near emissions sources (for example, near busy roads), and both acute and chronic exposure are believed to lead to health problems. As part of ...

    By Teledyne API based in San Diego, CALIFORNIA (USA). from Ambient Particulate (Dust) Monitors Product line

  • Premium

    Bühler - Model AGF-PV-30 - Fine Mesh Filter

    Even if the particular contaminant has already been removed at the extraction point through effective particle filtration inside the gas sampling probe, in long or branched sample gas line there is a risk of secondary contamination.

    By Bühler Technologies GmbH based in Ratingen, GERMANY. from Gas Analysis - Sample Gas Filters Product line

  • Premium

    Bühler - Model AGF-T-30 - Fine Mesh Filter

    Even if the particular contaminant has already been removed at the extraction point through effective particle filtration inside the gas sampling probe, in long or branched sample gas line there is a risk of secondary contamination. Additional filters are therefore often installed at the point where the sample gas enters the analysis system and ...

    By Bühler Technologies GmbH based in Ratingen, GERMANY. from Gas Analysis - Sample Gas Filters Product line

  • Premium

    Bühler - Model AGF-VA-23 - Fine Mesh Filter

    Even if the particular contaminant has already been removed at the extraction point inside the through effective particle filtration gas sampling probe, in long or branched sample gas line there is a risk of secondary contamination.

    By Bühler Technologies GmbH based in Ratingen, GERMANY. from Gas Analysis - Sample Gas Filters Product line

  • Premium

    Bühler - Model AGF-VA-350 - Fine Mesh Filter

    Even if the particular contaminant has already been removed at the extraction point inside the through effective particle filtration gas sampling probe, in long or branched sample gas line there is a risk of secondary contamination.

    By Bühler Technologies GmbH based in Ratingen, GERMANY. from Gas Analysis - Sample Gas Filters Product line

  • P-TRAK - Ultrafine Particle Counter

    The TSI's P-TRAK® Ultrafine Particle Counter (UPC) is a totally new approach to eliminating IAQ problems. This portable instrument detects and counts ultrafine or nanoparticles (smaller than 1 micrometer in aerodynamic diameter) that often accompany or signal the presence of a pollutant that is the root cause of complaints. It is now being ...

    By TSI Incorporated based in Shoreview, MINNESOTA (USA). from Indoor Air Quality Product line

  • AIROFOG - Model AR35E - AIROFOG THERMAL FOGGER AR35E

    AIROFOG THERMAL FOGGERS USE THE “PULSE JET PRINCIPLE” OF IGNITING FUEL THROUGH A TUNED RESONATOR TUBE, WHICH ALLOWS FOR CONTINUOUS ENGINE OPERATION WITHOUT ANY MOVING PARTS. HERE, THE EXHAUST GASSES ARE MIXED WITH A DILUENT CONTAINING THE FOGGING MATERIAL TO CREATE A DENSE FOG OF FINELY ATOMIZED PARTICLES, TYPICALLY RANGING BETWEEN 3-10UM IN ...

    By AIROFOG MACHINERY CO., LTD based in SHANGHAI, CHINA.

  • 10-Bar Fine Grinder

    The 10-Bar fine grinder is for processing materials in explosive environments such as sugar grinding from (4X to 12X) with a single pass mill. These new mills are designed for explosion pressure shock resistance up to 10 bar (145 psi). Ideally, these mills are best suited for heat-sensitive products that require a tight distribution of particle ...

    By Prater Industries based in Bolingbrook, ILLINOIS (USA). from Fine Grinders Product line

  • Model No. APM 550 - PM2.5 / Samplers APM 550

    Recent studies sponsored by USEPA have concluded that Fine Particles, (PM2.5) which penetrate deep into the lungs, are more likely to contribute to health effects. Fine Particulate Matter (FPM) also adversely affects visibility. In keeping with Envirotech’s tradition of anticipating the need and pioneering development of suitable indigenous ...

    By Envirotech Instruments Pvt. Ltd. (EIPL) based in New Delhi, INDIA.

  • Dekati - Gravimetric Impactor DGI

    DGI-1570 (Dekati® Gravimetric Impactor) is a high sample flow rate cascade impactor designed for measuring gravimetric particle size distribution of particles

    By Dekati Ltd. based in Kangasala, FINLAND. from Dekati Fine Particle Measurement Product line

  • AEROTRAK - Particle Counters Portable

    The AEROTRAK Optical Particle Counter is a new addition to TSI’s full line of real-time particle measuring instruments including photometers for mass concentration, condensation particle counters for ultrafine particles and diffusion charging with electrometer signal for surface area measurement. Typical applications include testing, ...

    By TSI Incorporated based in Shoreview, MINNESOTA (USA). from Particle Counters & Detectors Product line

  • Dekati - Model ELPI+ - Electrical Low Pressure Impactor

    ELPI®+ (Electrical Low Pressure Impactor) is an improved version of the widely used and well characterized ELPI® -system. ELPI®+ enables measurement of real-time particle size distribution and concentration in the size range of 6 nm – 10 µm with 10 Hz sampling rate. The ELPI®+ features include real-time stand-alone ...

    By Dekati Ltd. based in Kangasala, FINLAND. from Dekati Fine Particle Measurement Product line

  • Model 4 - Rotary Knife Cutters

    Munson's Rotary Knife Cutter is designed primarily as a cutter/cracker for grains, spices, roots and related food products. One of the more popular applications is cutting corn for chicken feed. It delivers controlled end product sizes with minimum fines at ultra-high rates, achieved by means of five rotating blades cutting against four stationary ...

    By Munson Machinery Company, Inc. based in Utica, NEW YORK (USA). from Coarse Size Reduction Product line

  • Pictos

    PICTOS combines the powerful dry dispersion of the RODOS with the high speed image analysis of QICPIC in a single robust instrument, specially designed for on-line applications in the process environment. PICTOS can directly operate in combination with the representative sampler family TWISTER, sampling probes, the MIXER or user supplied samplers. ...

    By Sympatec GmbH based in Clausthal-Zellerfeld, GERMANY. from Image Analysis Product line

  • Electrical Aerosol Detector Model 3070A

    The Electrical Aerosol Detector (EAD) measures a key aerosol parameter believed to indicate the effective surface area of particles that can be deposited in the lung. This aerosol detector is a unique complement to our line of CPCs. Like a CPC, the EAD measures particle concentration as a function of time. But it also measures a parameter called ...

    By TSI Incorporated based in Shoreview, MINNESOTA (USA). from Particle Counters & Detectors Product line

  • QICPIC - Particle Size And Shape Analysis

    Particle size and shape analysis with image processing of highest order 1 µm - 30 mm. Sympatec has recently launched an image analysis sensor, which combines particle size and shape analysis. An innovative new technique with extremely short exposure time of less than 1 ns allows for the use of efficient and reliable dispersion units thus ...

    By Sympatec GmbH based in Clausthal-Zellerfeld, GERMANY. from Image Analysis Product line

  • P-TRAK (IH) - Ultrafine Particle Counter

    TSI’s P-Trak® Ultrafine Particle Counter offers a new tool for industrial hygiene and exposure monitoring investigations. Using Condensation Particle Counting (CPC) technology, this portable instrument detects and counts ultrafine and nanoparticles.

    By TSI Incorporated based in Shoreview, MINNESOTA (USA). from Exposure Monitoring Product line

  • Coromax - Pulse System

    Reduces dust emissions and increases ESP efficiency in coal-fired power plants. The Coromax® pulse system is a simple replacement of the existing high voltage power supply. The replacement can be done very fast with a minimum of downtime and does not create additional environmental challenges. Power consumption is reduced significantly as well ...

    By FLSmidth A/S - Airtech based in Valby, DENMARK. from Power Industry Product line

  • AIROFOG - Model AE35E - AIROFOG THERMAL FOGGER AE35E

    ACID RESISTANT - PERFECT FOR APPLYING ACID SOLUTIONS !AIROFOG THERMAL FOGGERS USE THE “PULSE JET PRINCIPLE” OF IGNITING FUEL THROUGH A TUNED RESONATOR TUBE, WHICH ALLOWS FOR CONTINUOUS ENGINE OPERATION WITHOUT ANY MOVING PARTS. HERE, THE EXHAUST GASSES ARE MIXED WITH A DILUENT CONTAINING THE FOGGING MATERIAL TO CREATE A DENSE FOG OF FINELY ...

    By AIROFOG MACHINERY CO., LTD based in SHANGHAI, CHINA.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you