Flue Gas News

  • Innecs Power Systems offers an obligation-free flue gas measurement

    Flue gas measurement Since 1 January 2017, the emission of natural gas heating units must meet the requirements of the Dutch Activities Decree (Activiteitenbesluit). The main emission requirement is < 70 mg/Nm³ bij 3% O2. Innecs offers you an obligation-free flue gas measurement, free of charge* Do you have a steam boiler or heating unit, and would you like some ...


    By Innecs Power Systems

  • ANDRITZ AG to supply five circulating fluidized bed boilers to Nine Dragons Paper, China

    nternational Technology Group ANDRITZ has received an order from Nine Dragons Paper (Holdings) Ltd. to supply a total of five circulating fluidized bed boilers (Powerfluid) for utilization of in-house residual materials. The boilers will be installed at the company‘s locations in Taicang, Quanzhou, Yongxin, Chongqing, and Dongguan. Start-up is scheduled for the second half of 2018. Only ...

  • Coal-fired Power Generators have lots of “Clean” opportunities

    In many Asian localities coal will be the only near term solution to create electricity, prosperity and health. In Japan, the U.S. and Europe coal will continue to provide much of the electricity for decades to come. Coal can be greener than any other form of generation. An example would be a system which uses 70% coal and 30% biomass and is producing CO2 which is injected to enhance oil ...


    By The McIlvaine Company

  • DESMI Pumps More Than a Match for Power Plant Residues

    Powering forward The world is gradually moving away from traditional energy production such as coal and gas and, as a result of the drive towards sustainability in recent years, waste-to-energy and biomass power plants have become a popular production method. Like their fossil-fuel colleagues, however, these plants must remove or ‘scrub’ potentially hazardous pollutants from ...


    By DESMI A/S

  • Technology Demonstrates Unparalleled Success in Mercury Removal From Flue Gas Emissions

    MercuRemoval, developer of gas treatment solutions, recently announced successful results of a trial in which its technology demonstrated dramatically high efficiency in removing mercury from flue gas emission, with mercury absorption and removal rate reaching 98%. The trials are conducted in collaboration with Israel Electric Corporation (IEC). The technology was ...


    By Smart Grid Observer

  • Hydroxyl Radical Eliminates H2S in Wet Scrubbers & Flue Gases

    In a recent study in Houston, TX, H2S was removed from a natural gas stream containing 2,000 mg/l of H2S and 5% CO2 using JC 9450 ROS. JC 9450 ROS is a new mineral oxychloride compound that generates Reactive Oxygen Species (ROS) like hydroxyl radical ions and others ions in a highly soluble form that is easy to use. The study, which simulated operating conditions of a wet scrubber, found that ...


    By Jenfitch, LLC

  • ANDRITZ to upgrade bleaching system for Cartulinas CMPC in Maule, Chile

    International technology Group ANDRITZ has received an order from Cartulinas CMPC S.A. to upgrade the complete bleaching system at its mill in Maule, Chile, which processes 100% radiata pine for the production of softwood BTMP (bleached thermo-mechanical pulp). Start-up of the upgraded bleaching system is scheduled for the fourth quarter of 2017. ...


    By ANDRITZ MeWa GmbH

  • Innovation drives flue gas treatment

    Sharing a common goal, experts in emissions monitoring and emissions abatement have formed a working partnership to develop innovative new materials for treating pollutants in flue gas emissions. A business strategy with a heavy focus on innovation has enabled Lhoist, a family owned Belgian company, to become one of the world’s leading providers of Flue Gas ...


    By Gasmet Technologies Oy

  • ANDRITZ to upgrade woodyard systems at Sappi North America’s mill in Skowhegan, Maine, USA

    International technology Group ANDRITZ has received an upgrade order from Sappi North America for a high-capacity debarking line and woodyard equipment to be installed at Sappi’s Somerset Mill in Skowhegan, Maine. The new line will further reduce wood losses and enhance the mill’s reliability and performance. Commissioning of the new line, which has a design capacity of 300 t/h of ...


    By ANDRITZ MeWa GmbH

  • ANDRITZ to supply tissue machine with the world’s largest steel Yankee to Brazil

    International technology Group ANDRITZ has received an order from Carta Fabril to supply a PrimeLineST W22 tissue machine with steel Yankee and steam-heated hood for its mill in Anápolis, Brazil. Start-up is scheduled for January 2019. The PrimeDry Steel Yankee delivered by ANDRITZ has a diameter of 22 ft. and thus is the largest for tissue worldwide. The combination with the ...


    By ANDRITZ MeWa GmbH

  • ANDRITZ honored with award for Best Business Partner by Solikamskbumprom, Russia

    On the occasion of the 75th anniversary of JSC Solikamskbumprom, ANDRITZ was awarded a certificate of recognition as the company’s "Best Business Partner". The celebration was held on July 20, 2016, in Berezniki, Russia, with around 300 guests attending, including government officials, customers, suppliers, and other business partners of Solikamskbumprom. ...


    By ANDRITZ MeWa GmbH

  • ANDRITZ successfully starts up second tissue machine with steel Yankee for St. Croix Tissue, USA

    International technology Group ANDRITZ has successfully completed the start-up of the second of two supplied PrimeLineTM W8 tissue machines with steel Yankees at the St. Croix tissue mill in Maine, USA. The machine has a design speed of 2,000 m/min and a width of 5.6 m. The Yankee is manufactured entirely of steel and has a diameter of 18 ft. It enables efficient drying at minimized energy ...


    By ANDRITZ MeWa GmbH

  • Rotork actuators support the environmental improvement programme at Aberthaw Power Station

    RWE Aberthaw Power Station in South Wales is now one of the most efficient coal fired power stations in the UK, through the use of automation that includes Rotork valve actuation. Aberthaw can generate around 1555 MW of electricity for the National Grid System, which is enough power to meet the needs of some 3 million households. Following the introduction of Flue Gas Desulphurisation (FGD) which ...


    By Rotork

  • Rotork actuators support the environmental improvement programme at Aberthaw Power Station

    RWE Aberthaw Power Station in South Wales is now one of the most efficient coal fired power stations in the UK, through the use of automation that includes Rotork valve actuation. Aberthaw can generate around 1555 MW of electricity for the National Grid System, which is enough power to meet the needs of some 3 million households. Following the introduction of Flue Gas Desulphurisation (FGD) ...


    By Rotork

  • Eco Waste Solutions has acquired the Enercon Waste to Energy Technology

    Eco Waste Solutions (EWS) is pleased to announce the 4th generation Enercon waste-to-energy (WTE) technology with new innovations for improved efficiency and operational reliability. Enercon Systems’ time-tested WTE technology has proven to be practical, reliable, and cost-effective for more than 30 years. This technology is the ideal choice for small- to medium-sized communities as it can ...


    By Eco Waste Solutions

  • Sweco to strengthen power supply in Warsaw

    As part of Poland’s ambition to decrease the amount of waste that goes to landfills, Sweco has been commissioned to design a waste-to-energy plant. The plant, that will be located in Warsaw, will be the largest one in Poland and will contribute to the region’s electricity supply. The customer is the municipal waste treatment agency Miejskie Przedsiębiorstwo Oczyszczania. The ...


    By Sweco Nederland BV

  • Sweco to Strengthen Power Supply in Warsaw

    As part of Poland’s ambition to decrease the amount of waste that goes to landfills, Sweco has been commissioned to design a waste-to-energy plant. The plant, that will be located in Warsaw, will be the largest one in Poland and will contribute to the region’s electricity supply. The customer is the municipal waste treatment agency Miejskie Przedsiębiorstwo Oczyszczania. The ...


    By Sweco Nederland BV

  • NEW E4500-N The IDEAL Commercial & Industrial Combustion Gas and Emissions Analyzer

    The NEW E4500-N Hand-Held Combustion Emissions Analyzer is a new, rugged unit with the ability to measure NOx from high efficiency & condensing boilers, burners, engines, turbines, kilns, furnaces, incinerators and other industrial combustion processes.  Featuring a new large COLOR display and expanded internal memory, the E4500-N lets you ...

  • Shredders installed at one of Finland’s largest waste-to-energy plant

    UNTHA has installed a robust shredding system at a new facility in Leppävirta, Finland, as one of the country’s biggest waste-to-energy power plant edges another step closer to completion. Two XR3000 Ripper pre shredders and two XR3000 Cutter post shredders have been supplied to ANDRITZ, the turnkey solution provider responsible for delivering the state-of-the-art 123.300.000 EUR ...


    By UNTHA Shredding Technology

  • Advanced, Compact Fluidized Slurry Gas Scrubber effectively handles SO2 at a carbon products manufacturer in Western PA

    Bionomic Industries, Inc., a leading manufacturer of cutting-edge scrubber systems technology, has announced successful startup of an advanced fluidized slurry  sulfur dioxide (SO2) gas scrubber at a facility in Western Pennsylvania. The compact, highly efficient scrubber utilizes Bionomics' patented RotaBed™ technology to harness the movement of the flue gas to provide both mixing and ...


    By Bionomic Industries Inc.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you