Gas Imaging Articles

  • Functionalised multi–walled carbon nanotubes for chemical vapour detection

    Oxygen plasma functionalised Multi–Walled Carbon Nanotubes (MWCNT) were used to prepare gas sensors that can operate at room temperature. Alumina substrates with interdigitated gold electrodes were employed as transducers and the air–brushing method was used to coat them with carbon nanotube film. Scanning Electron Microscope (SEM) and Transmission Electron Microscope (TEM) images of deposited ...


    By Inderscience Publishers

  • The Drumbeat on infrared thermal imaging

    Drumbeat Energy regards infrared (thermal) imaging as an amazingly useful tool in the quest for greater energy efficiency. It has the ability to define non-invasively and with uncanny speed and accuracy where heat is leaking from a building. Never was the expression “A picture paints a thousand words” ...


    By Drumbeat Energy Limited

  • High-performance geomembranemth evoh technology part of gas vapor mitigation solution case study

    Project: Chik-Fil-A Location: Fort Worth, TX Products: Liquid Boot PLUS Gas Vapor Mitigation System with VI-20™ Geomembrane GeoVent™ Gas Venting System Background: The owner of the former manufacturing site and the engineer understood the value of having a barrier with superior vapor resistance and a long standing ...


    By CETCO

  • What comes to mind when you think of `global warming?`

    In the past decade, the images and feelings Americans associate with the term "global warming" have shifted dramatically. Researchers at the Yale Project on Climate Communication recently published an article in the journal Risk Analysis that identifies and analyzes these shifts in the connotative meaning of "global warming." The most striking result is the increase in the proportion of Americans ...


    By GLOBE Foundation

  • Three–dimensional pore networks and transport properties of a shale gas formation determined from focused ion beam serial imaging

    Three–dimensional pore network reconstructions of mudstone properties are made using dual focused ion beam–scanning electron microscopy (FIB–SEM). Samples of Jurassic Haynesville Formation mudstone are examined with FIB–SEM and image analysis to determine pore properties, topology, and tortuosity. Resolvable pore morphologies (>~10 nm) include large slit–like pores between clay aggregates and ...


    By Inderscience Publishers

  • Three-dimensional pore networks and transport properties of a shale gas formation determined from focused ion beam serial imaging

    Three-dimensional pore network reconstructions of mudstone properties are made using dual focused ion beam-scanning electron microscopy (FIB-SEM). Samples of Jurassic Haynesville Formation mudstone are examined with FIB-SEM and image analysis to determine pore properties, topology, and tortuosity. Resolvable pore morphologies (>~10 nm) include large slit-like pores between clay aggregates and ...


    By Inderscience Publishers

  • Fugitive Gas Emissions In The Petroleum & Natural Gas Industry

    Challenge: Fugitive emissions in the petroleum and natural gas industry can come from a variety of sources and are classified as intentional (venting from tanks, compressor vents and stacks) or unintentional (equipment wear and tear, improper assembly, damage or manufacturing defects).  Most of these fugitive gas leaks are considered insignificant or  too small to ...


    By Leak Imaging, LLC

  • GEM condensate return system projects

    Most of the Coca-Cola consumed in Northern Ireland comes from the company’s Lambeg bottling plant. An assessment was conducted on the steam trap needs for the water heater of the company’s large bottle washer and bucket tests showed variable flow up to a quarter of a tonne of steam per hour. The two inverted bucket steam traps in the system were proving unreliable, so they were replaced with two ...

  • J-E characteristics of Ni-catalysed multiwalled carbon nanotubes

    A catalytic decomposition of hydrocarbons involving N2, C2H2 and H2 gas mixtures is used to synthesise the Ni catalysed carbon nanotubes (CNTs). These CNTs are grown on nanocrystalline film of nickel using low-pressure chemical vapour deposition (LPCVD). During the synthesis of these nanotubes, the growth temperature and growth time is kept at 700°C and 30 minutes respectively. The pressure in ...


    By Inderscience Publishers

  • Smart LDAR — more cost-effective?

    On December 19, 2008, EPA issued a final rule establishing a voluntary Alternative Work Practice (AWP) to detect leaks of volatile organic compounds (VOC) and hazardous air pollutants (HAP) from process equipment (FR Vol. 73, Number 246), thereby providing the regulated community additional flexibility in complying with leak detection and repair (LDAR) requirements. The AWP allows owners or ...


    By Trinity Consultants

  • Advances in gas control technology in the brewery

    The use of nitrogen as a process gas, foam enhancer and flavour modifier has come to the fore over the last 10 years, with dissolved gas specifications becoming more stringent. Increasingly, marketing and consumer requirements for a targeted product identity or image have to be met, not only for taste but, perhaps equally as importantly for the consumer, ...

  • Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you