Gas Sampling Downloads

  • Premium

    Solvent Recovery & Distillation Upgrades & Services

    MEGTEC can review your existing Carbon Adsorption System and offer upgrades and rebuilds that would ensure your equipment is running at maximum efficiency. Running your equipment at its peak performance will save you money and eliminate downtime.Optimization for Solvent Recovery EquipmentMEGTEC offers unparalleled experience in evaluating your system and identifying ways to save energy. By ...


    By Babcock & Wilcox MEGTEC LLC

  • Premium

    F&J - Model GAS-22 - Global Low Volume Air Sampler (100 - 120 VAC) - Brochure

    The Model GAS-22 Global Air Sampling System is a microprocessor controlled low-volume air sampler consisting of an oil-less, carbon vane vacuum pump, with a constant airflow regulator for use where a nearly constant airflow is desirable. The regulator holds a constant pressure drop across an inline venturi, by varying the flow through a bypass valve into the pump. This system allows the pump to ...


    By F&J Specialty Products, Inc.

  • Premium

    F&J - Model GAS-1 - Global Low Volume Air Sampler (100 - 120 VAC) - Brochure

    The Model GAS-1 Global Air Sampling System is a microprocessor controlled low-volume air sampler consisting of an oil-less, carbon vane vacuum pump, with a constant airflow regulator for use where a nearly constant airflow is desirable.  The regulator holds a constant pressure drop across an in-line venturi by varying the flow through a bypass valve into the pump.  This ...


    By F&J Specialty Products, Inc.

  • Premium

    Low Volume Global Air Sampling Systems Overview - Brochure

    The F&J Global Air Sampling (GAS) systems raise the bar for air sampling instruments by providing air sampling specialists with the maximum operator flexibility, an increase in the amount of valuable information about the air sampling event, increased accuracy and the best combination of tools to comply with present and future regulatory ...


    By F&J Specialty Products, Inc.

  • Premium

    F&J - Model GAS-1E - Global Low Volume Air Sampler (200 - 240 VAC) - Brochure

    The Model GAS-1E Global Air Sampling System is a microprocessor controlled low-volume air sampler consisting of an oil-less, carbon vane vacuum pump, with a constant airflow regulator for use where a nearly constant airflow is desirable. The regulator holds a constant pressure drop across an inline orifice by varying the flow through a bypass valve into the pump. This system allows the pump to ...


    By F&J Specialty Products, Inc.

  • Premium

    BTEX in Ambient Air Application - Brochure

    The Series 8900 BTEX Analyzer provides direct measurement of Benzene, Toluene, Ethylbenzene, and Xylenes in ambient air. This instrument is utilized in ambient air networks around metropolitan areas and fence-line monitoring at industrial sites. The Series 8900 BTEX Analyzer employs a photoionization detector (PID) as the sensing element. This detector is specific to volatile organic compounds. ...


    By AMETEK MOCON - Baseline

  • Premium

    JCT - Model JES-301L - Gas Sampling Probe - Manual

    The heated gas sampling probe JES-301L is designed for continuous use in extractive sampling systems even when the sample contains dust and aerosols. Water vapour and high corrosive gases must be kept above their dew point to prevent corrosion and sample degradation prior to the analysis or sample ...


    By JCT Analysentechnik GmbH

  • Premium

    JCT - Model JH3F & JH3FR - Heated Sample Lines with PA-Corrugated Hose - Manual

    The series of heated hoses Jhxx is designed to transport sample gas from the to the sample conditioners respectivly analysers with constant ...


    By JCT Analysentechnik GmbH

  • Premium

    JCT - Model JCM - Sample Gas Peltier Cooler - Manual

    JcM sample gas coolers are used to reduce the dew point of wet sample gases. They ensure reliable conditioning of sample gases to enhance analysis results. Because water vapours are suppressed, analyzers can be used in continuous operation with high availability at low maintenance. ...


    By JCT Analysentechnik GmbH

  • Premium

    JCT - Model JCC-R / JCC-Q / JCC-P / JCC-L - Gas Conditioning Systems - Manual

    Applications: For mobile or stationary extractive gas analysis. For emission and process monitoring. Continuous sample gas conditioning of humid process gases. Continuous drying of sample gas to a precise low and constant outlet dew point. Minimises water vapour cross sensitivities and volumetric ...


    By JCT Analysentechnik GmbH

  • Premium

    JCT - Model JES-301E1 - Gas Sampling Probe - Manual

    Applications: For continuous gas sampling in processes with dust and humidity. Ex-version Zone 1 or 2. Removing aerosols and dust from gas sample. Extractive gas analysis. Emission monitoring and process monitoring. For outdoor and indoor ...


    By JCT Analysentechnik GmbH

  • Premium

    JCT - Model JHPF - Heated Adapter Pipe - Manual

    Applications; For extractive gas analysis. For emission and process monitoring. Process external heating of pre-filters for applications with high dust concentrations combined with high process temperatures (above maximum temperature of pre-filter). Combinable with gas sampling probes JES-301 and JES-301L. ...


    By JCT Analysentechnik GmbH

  • Premium

    JCT - Model 3 - Grand Sample Gas Cooler (Compressor) - Manual

    Applications: For extractive gas analysis. For emission and process monitoring. Continuous drying of sample gas to a precise low and constant outlet dew point. Minimises water vapour cross sensitivities and volumetric ...


    By JCT Analysentechnik GmbH

  • Premium

    JCT - Model JES-301E1SVZ - Gas Sampling Probe - Manual

    The heated gas sampling probe JES-301E1SV is designed for continuous use in extractive sampling systems in Zone 1 even when the sample contains dust and aerosols. Water vapour and high corrosive gases must be kept above their dew point to prevent corrosion and sample degradation prior to the analysis or sample ...


    By JCT Analysentechnik GmbH

  • Premium

    JPES - Manual

    Applications: For mobile extractive gas analysis. For emission and process monitoring. For mobile representative gas sampling in dust and humidity containing processes. For removal of dust from the sample gas stream. For condensate free transport from the sampling point to the conditioning system or the analyser. Especially designed for:. Stack testers. Authorities (QAL 2). mobile back-up ...


    By JCT Analysentechnik GmbH

  • Premium

    JHxx Manual

    The series of heated hoses Jhxx is designed to transport sample gas from the to the sample conditioners respectivly analysers with constant ...


    By JCT Analysentechnik GmbH

  • Premium

    JCT - Model JES-301K - Back Purge Control Unit - Manual

    Applications: For extractive gas analysis. For emission and process monitoring. For control of automatic back purge of JCT gas sampling probes series JES-301. For applications with high dust concentrations. For regular cleaning of probe filter, filter chamber and possible ...


    By JCT Analysentechnik GmbH

  • Premium

    JCT - Model JES-301 - Heated Gas Sample Probe - Manual

    The heated gas sampling probe JES-301 is designed for continuous use in extractive sampling systems even when the sample contains dust and aerosols. Water vapour and high corrosive gases must be kept above their dew point to prevent corrosion and sample degradation prior to the analysis or sample ...


    By JCT Analysentechnik GmbH

  • Premium

    JCE-2 Ex - Manual

    Applications: For operation in Ex-zone 2. For extractive gas analysis. For emission and process monitoring. Continuous drying of sample gas to a precise low and constant outlet dew point. Minimises water vapour cross sensitivities and volumetric ...


    By JCT Analysentechnik GmbH

  • Premium

    JCT - Model JNOX - NO2 to NO Sample Gas Converter - Manual

    The JNOX Series is designed to convert NO2 to NO for extractive flue gas analysis systems where total NOx concentrations are measured. Sample gas converters of the series JNOX are equipped with heated stainless steel cartridges. They are small in size, of modular design and designed for long life and versatile ...


    By JCT Analysentechnik GmbH

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you