Gas Treatment Articles

  • The design and build of a process and wastewater treatment plant - Inlet: 900 mc/h - Case Study

    The client Ferrara Food, part of the S.F.I.R. group, is a company operating in the agro-industrial sector. More specifically Ferrara Food operates within the preserved food industry, specialising in tomato processing, from fresh product to semi-finished and finished products. Semi-finished products can be 200kg containers, or 1200kg bigbags, filled through an ...


    By IDRAFLOT

  • ERG supplied a £2.3m waste gas treatment plant. Over 2 years on and the plant continues to deliver emissions compliance for Saffil - Case study

    Summer 2015 marked the completion of two years successful operation of an ERG (Air Pollution Control) Ltd designed, installed and commissioned waste gas treatment plant at the Saffil production facility in Widnes.  Background Saffil Ltd, a wholly owned subsidiary of Unifrax, produces high temperature insulation products, for use in automotive catalytic convertors and other ...

  • Improved well tuning achieved at a Landfill gas to Energy developer`s sites - Case Study

    Building and managing a high-BTU landfill gas to energy system can present many challenges, but it’s not as complicated as it might seem. The key: start with a healthy, consistently productive wellfield. Morrow Renewables, formerly South Tex Renewables, specializes in doing just that. Headquartered in Midland, Texas, they began in the natural gas industry before building a reputation as one ...


    By QED Environmental Systems

  • Using Air Strippers for Off-gas Treatment - Case Study

    Two pharmaceutical plants in Puerto Rico used large sequencing batch reactor (SBR) systems to treat their wastewater. The primary treatment was an aerobic bio breakdown of the waste. The were forced to change their treament process because of change in treatment regulations. The new regulations required them to treat off-gas that was coming from the SBRs. They were faced with installing a very ...


    By QED Environmental Systems

  • Case study - Heat loss - A problem for wastewater treatment & nitrification

    Problem: Operators know aerobic and anaerobic systems need sufficient water temperature to keep microbial populations active and working. Heat loss is detrimental to effluent quality and gas production. Both systems can be negatively affected from low daily and seasonal temperatures. Unfortunately, most operators and engineers have no control over water temperature loss in their tanks and ...

  • Case Study - Estonian Cell - BCTMP Mill

    Wastewater generated at Estonian Cell The Aspen pulp mill Estonian Cell, part of Heinzel Group, rewarded HydroThane the contract as the technology supplier for their anaerobic treatment after having done extensive piloting in 2011. Since January 2014 the anaerobic treatment has been in operation, earning AS Estonian Cell both national and international recognition as being ...


    By HydroThane STP BV

  • Wastewater from Viscose pulping process - Case Study

    In March 2012 HydroThane started a new project in collaboration with the multinational Lenzing AG, the global market leader in the production of man-made high-quality cellulose fibres. The project was intended for the company Lenzing Biocel Paskov (LBP) located in Czech Republic, which recently changed their technology to produce viscose pulp instead of paper. With this production change also ...


    By HydroThane STP BV

  • Repair, retrofit, and rebuild services for amine treating acid gas process - Case Study

    Catalytic Products International (CPI) was recently engaged by a Western Colorado Gas Processing Facility to review the existing amine treating acid gas process and the air pollution control equipment installed in an effort to help optimize the units and make improvements to the reliability of the entire system. Introduction: Identify root cause of numerous failures and create an ...

  • Adsorptive removal of methylene blue by CuO-acid modified sepiolite as effective adsorbent and its regeneration with high-temperature gas stream

    In this study, the dynamic adsorption of methylene blue dye onto CuO-acid modified sepiolite was investigated. Meanwhile, the equilibrium and kinetic data of the adsorption process were studied to understand the adsorption mechanism. Furthermore, a high-temperature gas stream was applied to regenerate the adsorbent. The results showed that the Langmuir isotherm model was applied to describe ...


    By IWA Publishing

  • Detailed off-gas measurements for improved modelling of the aeration performance at the WWTP of Eindhoven

    At wastewater treatment plants (WWTPs), the aerobic conversion processes in the bioreactor are driven by the presence of dissolved oxygen (DO). Within these conversion processes, the oxygen transfer is a rate limiting step as well as being the largest energy consumer. Despite this high importance, WWTP models often lack detail on the aeration part. An extensive measurement campaign with ...


    By IWA Publishing

  • Landfill leachate treatment

    Landfills are categorized by regulations in three types: industrial, municipal, and hazardous. Individual landfills may be further differentiated by the types of waste which they accept. All landfills are required to be capped, usually occurring at the end of each day. The cap is typically 6-8” of soil. The cap reduces odor and loss due to wind. At the closing of the landfill, a permanent ...


    By WesTech Engineering, Inc.

  • Case study - China Resources Gas Group Ltd

    Anaerobic fermentation project with waste water in Qidong Jiangsu Province, China.  The purification project was set up in order to connect the biogas to the city’s gas pipeline. The customer’s challenge Biogas upgrading: the Group aims to make use of what would ordinarily be a by-product – waste water.  Gas is extracted from a water treatment process, ...


    By Geotech

  • Ethylene Plant Treatment Hydrocarbon Engineering

    Ethylene is the most commonly produced petrochemical product. The bulk of annual commercial ethylene production is based on thermal cracking of hydrocarbon feedstocks with steam. Usual raw materials for pyrolysis are refinery gas, liquid petroleum gas (LPG), natural gas liquids (NGL), naphtha or gas oil. The production of ethylene is a very complex process, including cracking, cooling, ...


    By Kurita

  • Case study - Amine tail gas treatment

    COVERING YOUR TAIL GAS The discovery of new shale formations throughout the world and the development of new drilling technologies have increased natural gas production and prompted government agencies to instigate tighter air-pollutioncontrol regulations on processing operations. Unfortunately, meeting environmental regulations is not a profit-generating endeavor. Simply put, the time ...

  • Case study - Natural gas production

    OVERVIEW The largest U.S.-based independent oil and gas producer and one of the largest independent processors of natural gas and natural gas liquids in North America was in search of new technologies to maintain the pollution control efficiency at their natural gas treatment facility. In typical gas plants, the well head natural gas needs to be treated to remove water, CO2, ...

  • Potential of nitrous oxide recovery from an aerobic/oxic/ anoxic SBR process

    Nitrous Oxide (N2O) is a kind of greenhouse gas which has a great influence on the global warming. And it is also a powerful oxidant in combustion reactions, which can improve the output power of biogas power generation from 5.7% to 7.3%. It is generally known that the amount of N2O emitted from wastewater treatment is 3% of the total global emissions of N2O. So it is of great significance for ...


    By IWA Publishing

  • The effect of microbubbles on gas-liquid mass transfer coefficient and degradation rate of COD in wastewater treatment

    A commonly used aeration device at present has the disadvantages of low mass transfer rate because the generated bubbles are several millimeters in diameter which are much bigger than microbubbles. Therefore, the effect of a microbubble on gas-liquid mass transfer and wastewater treatment process was investigated. To evaluate the effect of each bubble type, the volumetric mass transfer ...


    By IWA Publishing

  • Chances for Bio-LNG

    Abstract An increasing effort is put into the utilization of organic waste streams in anaerobic digesters, producing useful products such as fertilizers and biogas. It becomes increasingly attractive to upgrade biogas to natural gas quality and consequently liquefy the gas to Bio-LNG. DMT Environmental Technology has been developing biogas treatment plants for over 25 years, closely ...

  • What do a brewery and a wastewater treatment facility have in common? More than you think

    You may think that a brewery and a wastewater treatment facility are about as similar as day and night, hot and cold, old and young. But they have more in common than you think. ABUTEC has worked with both to ensure their waste-to-energy systems function at top capacity. Bell’s Brewery in Kalamazoo, Michigan, needed a way to save money, ensure compliance and practice sustainability. ...


    By ABUTEC LLC

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you