Only show results in Massachusetts? Ok

Hydrogen Sulfide (H2S) Monitoring Applications

  • Premium

    Total sulfur measurement for sulfur compounds in CO2 for food & beverage industry

    The BevAlert Model 8900 provides a total sulfur measurement for sulfur compounds in Carbon Dioxide. The measurement includes organic sulfides, Sulfur Dioxide, Carbonyl Sulfide, and Hydrogen Sulfide. The instrument is utilized by Specialty Gas Manufacturers and the Food and Beverage Industry to monitor sulfur compounds in CO2 used in carbonated beverages.

    By AMETEK MOCON - Baseline based in Lyons, COLORADO (USA).

  • Premium

    Industrial hygiene - personnel safety gas analyzers for industrial air monitoring

    Industrial companies produce during there manufacturing process toxic compounds such as Benzene or H2S. CHROMATOTEC analysers are able to monitor such compounds. For this kind of applications we generally find ranges of 0.1 to 10 ppm. The corresponding analysers for these applications are the chromaFID and the chromaPID, according to technical specifications (gas to be analysed, environment of the analysis, concentration range,…).

    By Chromatotec Group based in Val de Virvée, FRANCE.

  • Premium

    Gas analyzers for pipeline integrity

    H2S/Total Sulfur analyzers for Natural Gas pipeline integrity monitoring. During the extraction and processing of raw Natural Gas, midstream companies are required to track the level of Hydrogen sulfide (H2S) and Total Sulfur (TS). Accurate analysis of H2S in Natural Gas is of high importance to reach natural gas standard and to avoid equipment corrosion, as well as the decrease of heating values.

    By Chromatotec Group based in Val de Virvée, FRANCE.

  • Premium

    Analysis of H2S, Mercaptans and/or THT in natural gas with energyMEDOR

    Context & Challenges How to analyze H2S, mercaptans and/or THT for detecting the odor of the gas with the ability to have total organic sulfur calculation in a metering station?

    By Chromatotec Group based in Val de Virvée, FRANCE.

  • Premium

    Gas analyzers for the food and beverage industry

    Detecting CO2 impurities: Ammonia, Acetaldehyde, Benzene, Total Sulfur Content, Total Hydrocarbons, SO2, COS. Carbon dioxide (CO2) is a commonly used additive in food and beverage industry (e.g. for soft drink, brewery, and champagne carbonation). Its fabrication process can lead to the presence of impurities such as aromatics, BTEX, ammonia, acetaldehyde, Total Hydrocarbons and sulfur compounds (Total Sulfur Content, SO2, COS, mercaptans...).

    By Chromatotec Group based in Val de Virvée, FRANCE.

  • Premium

    Gas analyzers for odor: bad smell

    The aim: analysis of H2S ppb and mercaptans with the TRSMEDOR because of the bad smell of exhausts.

    By Chromatotec Group based in Val de Virvée, FRANCE.

  • Premium

    Gas analyzers for odorization injection and control

    Mercaptans or THT are added to natural gas to make it smell and to make it detectable by the human nose (odorization process and odorization control in pipes). energyMEDOR ppm: 30 years’ experience.The compounds usually used to odorize natural gas vary from one country to another but are usually: Ter Buthyl Mercaptan (TBM) TetraHydroTiophene (THT) MethylEthylSulfide (MES) Analyze H2S and mercaptans concentration in natural gas (ppm).

    By Chromatotec Group based in Val de Virvée, FRANCE.

  • Premium

    Portable and fixed gas analysers for landfill gas field management

    Careful management of the many boreholes across a landfill gas field can optimise the gas yield and therefore the power generated from the gas.

    By QED Environmental Systems Ltd. based in Coventry, UNITED KINGDOM.

  • Premium

    Cement industry online monitoring solutions

    Dust, SO2, NOx, CO, CO2 and other gases generated in the fuel decomposition, combustion and other production processes of cement industry have a serious impact on the atmospheric environment. So it is essential to check the content of these gases for energy conservation, increase productivity, reduce energy consumption and protect the safety of life and production. The company`s gas analysis technology can accurately and reliably measure various industrial gas content, to provide a complete gas analysis solutions...

    By Hangzhou Zetian Technology Co., Ltd. based in Hangzhou, CHINA.

  • Premium

    Measurement of hydrogen sulfide & carbon disulfide in air for continous emission monitoring

    The Series 8900 Hydrogen Sulfide and Carbon Disulfide Analyzer provides direct measurement of H2S and CS2 in ambient air. This instrument is utilized for continuous emission monitoring. The Series 8900 H2S and CS2 Analyzer employs a Photoionization detector (PID) as the sensing element. A dual column configuration with timed backflush to vent is used to strip off moisture and heavier hydrocarbons. A pre-cut column is used in series with the analytical column. At sample injection a fixed volume of sample is...

    By AMETEK MOCON - Baseline based in Lyons, COLORADO (USA).

  • Premium

    Odorization low ppm gas analyzers for natural gases / LPG industry

    The aim : analyze H2S and mercaptans concentration in natural gas (ppm). These mercaptans are added to natural gas to make it smell to make it detectable by the human nose (odorization process and odorization control in pipes) : energyMEDOR ppm / 30 years’ experience. The compounds usually used to odorize natural gas vary from one country to another but are usually : Ter Buthyl Mercaptan (TBM) TetraHydroTiophene (THT) MethylEthylSulfide (MES).

    By Chromatotec Group based in Val de Virvée, FRANCE.

  • Premium

    Process analyzers & instruments for H2S

    By AMETEK Process Instruments based in Pittsburgh, PENNSYLVANIA (USA).

  • Premium

    Continuous emissions monitoring solutions for H2S monitoring

    To monitor H2S can be difficult. The UV absorption is without structure and the IR absorption has strong interference from H2O. The traditional way has been to remove all SO2 from the sample while keeping H2S, then convert H2S to SO2 ,and finally measure SO2 which then effectively yields the H2S concentration. The instruments used have often been ambient air SO2 analysers and extractive dilution systems. However, it is not unusual to experience practical problems with these type of installations.

    By Opsis AB based in Furulund, SWEDEN.

  • Premium

    Innovative gas measurement solutions for oil and gas industry

    Protecting a pressurized gas pipeline system from leaks and corrosion and minimizing downtime are among the most important responsibilities that oil and gas companies have. According to the National Association of Corrosion Engineers (NACE) International, corrosion alone costs the industry over $1.3 billion a year.

    By Advanced Micro Instruments, Inc. (AMI) based in Costa Mesa, CALIFORNIA (USA).

  • Premium

    Air pollution, emission and process monitoring systems for food & pharma

    High accuracy measurement and reliability in monitoring instrumentation is called for by Food and Pharmaceutical Processes. ENVEA’s unique capabilities allow the observation and control of many of the manufacturing functions found in these industries. From the measurement and control of emitted dust from dryer filter plant to the non-intrusive, solid state measurement of powder mass flow and the monitoring of process gas quality, ENVEA instrumentation provides Plant Operators with the opportunity to fine...

    By ENVEA based in Poissy, FRANCE.

  • Premium

    Machine condition monitoring for food and beverage

    Manufacturers of food and beverages typically have a high volume of product passing through their facilities at all times. For this reason, any unexpected downtime can be very costly in terms of lost production. In addition, many food and beverage facilities have difficult challenges associated with lubricant contamination.

    By Spectro Scientific based in Chelmsford, MASSACHUSETTS (USA).

  • Premium

    Continuous emissions monitoring solutions for chemical industry

    Process control and emissions monitoring in a chemical plant is a challenge due to corrosive gases, high dust load, and high temperatures. To use an extractive system in this environment will demand a lot of maintenance.

    By Opsis AB based in Furulund, SWEDEN.

  • Integrated real-time gas analysis solution for combustion efficiency sector

    CIC Photonics has made its mark with several R&D institutes where research is underway to determine the optimum thermodynamic performance of new turbine engine designs combined with new diesel fuel formulations. This sophisticated IRGAS technology has included not only a basic FTIR gas analyzer but also analyzers for H2, O2, THC, and a powder meter all integrated into a comprehensive IRGAS Solution.

    By CIC Photonics based in Albuquerque, NEW MEXICO (USA).

  • Industrial Solution for metallurgical, mining & chemical

    Hydrometallurgical extraction of metals such as Nickel and Cobalt generate emissions of lethal gases such as Hydrogen Sulphide or Hydrogen Chloride. Macrotek has designed and supplied many systems to capture and treat these gases. In most cases the by-product is returned back to the process for reuse. Pyrometallurgical extraction of metals from sulphur containing ores generate large amounts of SO2 and particulate emissions. Macrotek has designed integrated systems to capture particulate and neutralizes SO2.

    By Macrotek Inc. based in Markham, ONTARIO (CANADA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you