Industrial Gas Detection Books

  • Eddy Covariance Method for Scientific, Industrial, Agricultural and Regulatory Applications

    “Eddy Covariance Method for Scientific, Industrial, Agricultural and Regulatory Applications: A Field Book on Measuring Ecosystem Gas Exchange and Areal Emission Rates”, authored by LI-COR Principal Scientist George Burba, was created to familiarize readers with the general theoretical principles, requirements, applications, and planning and ...

    By LI-COR

  • Manual of Industrial Corrosion Standards and Control

    A comprehensive 11 Chapter volume covering corrosion in petroleum, gas, automotive, pipeline, telephone, marine, nuclear, chemical, nonferrous and ferrous ...

  • API RP 70 Standard for Exploration & Production

    Scope, Purpose and ObjectiveThis publication is intended to assist the offshore oil and natural gas drilling and producing operators and contractors in assessing security needs during the performance of oil and natural gas operations. The offshore oil and natural gas industry uses a wide variety of contractors in drilling, production, and ...

  • API SPEC 5L Standard for Exploration & Production

    This International Standard specifies requirements for the manufacture of two product specification levels (PSL 1 and PSL 2) of seamless and welded steel pipes for use in pipeline transportation systems in the petroleum and natural gas industries.This International Standard is not applicable to cast ...

  • API STD 662 PART 2 For Petroleum Refining Standards

    This part of ISO 15547 gives requirements and recommendations for the mechanical design, materials selection, fabrication, inspection, testing, and preparation for shipment of brazed aluminium plate-fin heat exchangers for use in petroleum, petrochemical and natural gas ...

  • Energy Decisions and the Environment

    Planning, operating, and policy making in the electric utility and natural gas sectors involves important trade-offs among economic, social, and environmental criteria. These trade-offs figure prominently in ongoing debates about how to meet growing energy demands and how to restructure the world's power industry. Energy Decisions and the ...

  • API STD 674 For Petroleum Refining Standards

    1.1 ScopeThis standard covers the minimum requirements for reciprocating positive displacement pumps for use in service in the petroleum, chemical, and gas industries. Both direct-acting and power-frame types are included. See API Standard 675 for controlled-volume pumps and Standard 676 for rotary pumps.Note: A bullet (•) at the ...

  • API STD 671 For Petroleum Refining Standards

    This International Standard specifies the requirements for couplings for the transmission of power between the rotating shafts of two machines in special-purpose applications in the petroleum, petrochemical and natural gas industries. Such applications are typically in large and/or high speed machines, in services that can be required to operate ...

  • API RP 686 For Petroleum Refining Standards

    This recommended practice (RP) is intended to provide recommended procedures, practices, and checklists for the installation and precommissioning of new, existing, and reapplied machinery and to assist with the installation design of such machinery for petroleum, chemical, and gas industry services facilities. In general, this RP is intended to ...

  • API STD 675 For Petroleum Refining Standards

    1.1 ScopeThis standard covers the minimum requirements for controlled volume positive displacement pumps for use in service in the petroleum, chemical, and gas industries. Both packed-plunger and diaphragm types are included. Diaphragm pumps that use direct mechanical actuation are excluded. See API Standard 674 for reciprocating pumps and ...

  • API SPEC 11D1 Standard for Exploration & Production

    This International Standard provides requirements and guidelines for packers and bridge plugs as defined herein for use in the petroleum and natural gas industry. This International Standard provides requirements for the functional specification and technical specification, including design, design verification and validation, materials, ...

  • Geometric Modelling, Numerical Simulation, and Optimization:

    This edited volume addresses the importance of mathematics for industry and society by presenting highlights from contract research at the Department of Applied Mathematics at SINTEF, the largest independent research organization in Scandinavia. Examples range from computer-aided geometric design, via general purpose computing on graphics cards, ...

  • API RP 582 For Petroleum Refining Standards

    This recommended practice (RP) provides supplementary guidelines and practices for welding and welding related topics for shop and field fabrication, repair and modification of the following:pressure-containing equipment such as pressure vessels, heat exchangers, piping, heater tubes, and pressure boundaries of rotating equipment and attachments ...

  • How Abundant? Assessing the Estimates of Natural Gas Supply Report

    This report analyzes the legal and economic factors, and provides an assessment of the cost and benefits, associated with increasing the use of natural gas for electric generation. It looks at the important preliminary issue of whether there is an adequate supply of natural gas available. Five scenarios of future natural gas supply, based on ...

  • Offshore Risk Assessment

    Offshore Risk Assessment was the first book to deal with quantified risk assessment (QRA) as applied specifically to offshore installations and operations. Risk assessment techniques have been used for some years in the offshore oil and gas industry, and their use is set to expand increasingly as the industry moves into new areas and faces new ...

  • API STD 682 For Petroleum Refining Standards

    This International Standard specifies requirements and gives recommendations for sealing systems for centrifugal and rotary pumps used in the petroleum, natural gas and chemical industries. It is applicable mainly for hazardous, flammable and/or toxic services where a greater degree of reliability is required for the improvement of equipment ...

  • API STD 618 For Petroleum Refining Standards

    This standard covers the minimum requirements for reciprocating compressors and their drivers for use in petroleum, chemical, and gas industry services for handling process air or gas with either lubricated or non-lubricated cylinders.Compressors covered by this standard are low to moderate speed machines. Also included are related lubrication ...

  • Offshore Risk Assessment

    Offshore Risk Assessment is the first book to deal with quantified risk assessment (QRA) as applied specifically to offshore installations and operations. Risk assessment techniques have been used for some years in the offshore oil and gas industry, and their use is set to expand increasingly as the industry moves into new areas and faces new ...

  • API SPEC 14L Standard for Exploration & Production

    This International Standard provides the requirements for lock mandrels and landing nipples within the production/injection conduit for the installation of flow control or other equipment used in the petroleum and natural gas industries. It includes the interface connections to the flow control or other equipment, but does not cover the ...

  • API STD 681 For Petroleum Refining Standards

    This standard covers the minimum requirements for liquid ring vacuum pump and compressor systems for service in the petroleum, chemical, and gas industries. This includes both vacuum pump and compressor design and system design.The design of the system is critical to the successful operation of the liquid ring vacuum pump or compressor. Close ...

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you