Only show results in Massachusetts? Ok

Jet Ventilators equipment for Air and Climate

  • Premium

    De Nora - Model EST - Scrubbers and Industrial Products

    De Nora Water Technologies offers a variety of EST eductor venturi products and ejectors as well as other process equipment. We supply individual eductor components as well as completely engineered packages incorporating pumps, valves, ejectors, piping and instrumentation. Our product offerings are available in a wide range of materials.

  • Vulcano - Model Georgia Series - Trailed Sprayer

    Fiberglass tank, level capacity tank with floating light, hand-washing tank, tank drain valve, suction filter with automatic shut-off valve, galvanized frame, load platform, adjustable steering, adjustable track, hydro-pneumatic mixer, plate jet holder in stainless steel pipes, multiplier 2 speed + neutral, ventilation group ...

    By Vulcano Atomizzatori s.r.l. based in Faenza (Ra), ITALY. from Trailed Sprayer Product line

  • Vulcano - Model Eco Series - Mounted Sprayers

    Polyethylene tank, tank drain valve, hand-washing tank, frame and ventilation group galvanized, suction filter with automatic shut-off valve, hydro-pneumatic mixer, stainless steel pipe jet holder, ventilation group ø600/ø700, adjustable propeller, multiplier 1 speed + neutral, single / double / triple-drip valve, diaphragm pump ...

    By Vulcano Atomizzatori s.r.l. based in Faenza (Ra), ITALY. from Mounted Sprayers Product line

  • Model Eco Lineare Series - Mounted Sprayers

    Polyethylene tank. Tank drain valve. Hand-washing tank. Frame and ventilation group galvanized. Suction filter with automatic shut-off valve. Hydro-pneumatic mixer. Stainless steel pipe jet holder. Ventilation ø600/ø700 Linear Group. Adjustable Propeller. Multiplier 1 speed + neutral. single / double / triple-drip valve. Diaphragm ...

    By Vulcano Atomizzatori s.r.l. based in Faenza (Ra), ITALY. from Mounted Sprayers Product line

  • Hybrid Systems

    A Hybrid System employs a combination of steam jet ejectors, intercondensers and a liquid ring vacuum pump to achieve required vacuum level. The liquid ring pump serves as the final stage(s) in a multi stage system. The benefits of this type of vacuum system are reduced steam consumption, small compact modular package, and low level (on grade) ...

    By Artisan Industries, Inc. based in Stoughton, MASSACHUSETTS (USA). from Hybrid Systems Product line

  • AWS Pico - Stream Jjet

    AWS pico stream jets are small, fixed or pivoting ventilators and flow generators with 2 - 8 kW of power. They are used for ventilating drainage and process water and for disposing deposits in smaller structures, flushing or pump sumps. The AWS stream jet‘s little brother has overall DATA EFFICIENCY with HydroMatic-IntelliGrid, TeleMatic, ...

    By HST Systemtechnik based in Meschede, GERMANY. from Stream Jjet Product line

  • Steam Jet Liquid Ejector

    Water vapour as motive medium is used to suck and transport liquids.

    By Körting Hannover AG based in Hannover, GERMANY. from Steam Jet Liquid Ejector Product line

  • Model RVS - Truck Atomizers

    Towed model operated by the tractor p.t.o. Fiberglassreinforced plastic tank with total emptying and a compact ensuring easy penetration into the vegetation. Excellent air flow diffusion enables a notable work capacity with minimum power input. All models of this series are manufactured according to the stricter EC specifications and standards.

    By IDROget Atomizzatori s.n.c based in Cesena, ITALY. from Truck Atomizers Product line

  • Rotons - Combined Sewage Pumping Stations

    Combined sewage pumping stations produced by ROTONS Ltd. are pre-prepared for installation on site. Pumping stations are available with the following sizes: internal diameter (ID) of 1000, 1200, 1500, 1800, 2000, 2300 mm; pumping height: up to 8000 mm. Upon request we can also make larger size bodies.

    By Rotons Ltd. based in Adažu nov, LATVIA. from Combined Sewage Pumping Stations Product line

  • MASK - Model MASK 219B - Air Ventilation Systems

    Dear Sir,With due respect we would like to introduce ourselves as MASK Associates is an electromechanical engineering firm has established in 2009. We are specialized ondesign & installation different types of latest industrial air ventilation & cooling systems-- HVLS Large Ceiling Fan- Direct/Indirect Evaporative Cooling- High Volume Axial & ...

    By MASK Associates based in BANGLADESH.

  • Gas Jet Liquid Ejector

    A gaseous motive medium is used to suck and transport liquids.

    By Körting Hannover AG based in Hannover, GERMANY. from Gas Jet Liquid Ejector Product line

  • Liquid Jet Liquid Ejector

    Liquid jet vacuum ejectors suck off gases and/or vapours from a process. The lowest possible suction pressure in the reactor is only limited by the vapour pressure of the motive liquid. It is possible to compress to atmospheric or even higher pressure.

    By Körting Hannover AG based in Hannover, GERMANY. from Liquid Jet Liquid Ejector Product line

  • CRClean Air - Model FS71 - Jet Venturi Fume Scrubbers

    The Jet Venturi Scrubber utilizes a liquid motivated ejector design to entrain contaminated gases, generally without the need for a blower. The relatively high liquid-to-gas ratio, liquid atomization, and open internal design provide effective scrubbing of heavily contaminated gases with minimal maintenance and virtually unlimited turndown ...

    By CR Clean Air Group, LLC based in Parsippany, NEW JERSEY (USA). from Jet Venturi Fume Scrubbers Product line

  • Graham - Steam Surface Condensers

    By producing a vacuum at the turbine discharge, condensers increase the overall cycle efficiency. Graham has more than 70 years of design and fabrication experience in the steam surface condenser field. Our knowledge allows for an expedient, accurate design and fabrication process. Using design methodologies and practices that have been honed over ...

    By Graham Corporation based in Batavia, NEW YORK (USA). from Steam Surface Condensers Product line

  • EVAPCO BLCT - Air Cooled Condense Spares

    No matter who supplied the original Air Cooled Condenser, EVAPCO-BLCT Dry Cooling can support your ACC spares requirements. Through strong relationships with key suppliers EVAPCO-BLCT Dry Cooling can provide spares often at lower prices than going directly to the original equipment supplier.

    By EVAPCO-BLCT Dry Cooling Inc based in Bridgewater, NEW JERSEY (USA).

  • MASK - Model MASK-219 - Industrial Dehumidification System

    Dear Sir,With due respect we would like to introduce ourselves as MASK Associates is an electromechanical engineering firm has established in 2009. We are specialized ondesign & installation different types of latest industrial air ventilation & cooling systems-- HVLS Large Ceiling Fan- Direct/Indirect Evaporative Cooling- High Volume Axial & ...

    By MASK Associates based in BANGLADESH.

  • Liquid Jet Ventilator

    Liquid jet ventilators using a liquid as motive medium suck off large gas volume flows. This is possible because only slight pressure differences must be overcome. Simultaneously dust, deposits and vapours can be washed out of the suction flow.

    By Körting Hannover AG based in Hannover, GERMANY. from Liquid Jet Ventilator Product line

  • Vulcano - Model Virgola - Mounted Sprayers

    Polyethylene tank, tank drain valve, hand-washing tank, washing tank, frame and ventilation group galvanized, suction filter with automatic shut-off valve, hydro-pneumatic mixer, stainless steel pipe jet holder, ventilation group ø600/ø800, adjustable propeller, multiplier 1 speed + neutral, single / double / triple-drip valve, ...

    By Vulcano Atomizzatori s.r.l. based in Faenza (Ra), ITALY. from Mounted Sprayers Product line

  • Euroline - Truck Atomizers

    Euroline is a new line of atomizer enginered and manufactured to face the requirements of modern farmers who are looking for high productivity, flexibility, reliability and precision in chemical applications. The modern manufacturing technologies, the technical quality of components, the reduced overall dimensions, the new tank design - five ...

    By IDROget Atomizzatori s.n.c based in Cesena, ITALY. from Truck Atomizers Product line

  • Model AP3t - Atomizers

    New line of supported atomizers manufactured to face the requirements of modern agricolture. Polyethylene tank equipped with independent built-in hand and sprying washing tanks. The high efficency fan units, the modern manufacturing technologies, the technical quality of components, allow to control, with the maximum of safety for operator the ...

    By IDROget Atomizzatori s.n.c based in Cesena, ITALY. from Atomizers Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you