Only show results in Connecticut? Ok

Laboratory Air services for Air and Climate

  • Asbestos and Health & Safety Services

    Providing a safe and healthy living and working environment is one of the major challenges facing public sector buildings, institutions, office buildings and private industrial and commercial facilities. As environmental regulations become stricter and more is learned about health risks and exposures, there is a need for careful assessment and ...

    By GEA Engineering PC based in Nanuet, NEW YORK (USA).

  • Methodology Development and Evaluation

    Methyl Aromatic Ratio Analysis (MARA). Dr. Smith developed and successfully uses MARA to differentiate between coal- and petroleum-related polycyclic aromatic hydrocarbon (PAH) compound contamination of soils at sites in Massachusetts. Under the Massachusetts Contingency Plan (MCP), Oil and Hazardous Material (OHM) related to coal, coal ash, and ...

    By OAK CREEK, Inc. based in Buxton, MAINE (USA).

  • Mold Services

    Air Sampling: Samples include Air-O-Cell, Micro 5 & Cyclex D. This analysis involve spore counting and identification of different categories of mold spores. The report includes spore counts for each category of spores and the grand total spore count for all spores per cubic meter of air.

    By EHS Laboratories Inc. based in Richmond, VIRGINIA (USA). from Lab Services Service line

  • Contracting and Consulting Services

    AirSon Engineering AB provides contracting and consulting services in energy-, building technology and controlled indoor climate. The company was founded in 1981 by Jan Kristensson and celebrates a 35-year anniversary this year. AirSon’s focus is mainly on installation-intensive projects with high demands and tight tolerances in e.g. ...

    By AirSon Engineering AB based in Ängelholm, SWEDEN.

  • IEI - Environmental Planning and Compliance Services

    IEI provides comprehensive environmental planning and compliance services in accordance with federal, state, local, international, and industry regulations and best practices including AIHA, ASHRAE, ANSI, SDWA, CAA, RCRA/CERCLA, and NPDES. We provide regulatory interaction and negotiation for site closure and client-specific guidance to meet DoD, ...

    By Inspection Experts, Inc. (IEI) based in Lincoln, NEBRASKA (USA). from Environment and Safety Service line

  • Asbestos Air Monitoring

    On large projects, immediate on-site analysis may be available when rapid turnaround is required. All Pinchin PCM analysts participate in the IRSST round robin program for air sample analysis. Air Monitoring samples for PCM analysis are prepared and analyzed according to the National Institute of Occupational Safety and Health (NIOSH) Method 7400 ...

    By Pinchin Ltd. - part of the Pinchin Group of Companies based in Mississauga, ONTARIO (CANADA).

  • Environmental Consultants & Laboratories

    Policy Highlights: Combined Occurrence Form General and Pollution Liability with a Claims Made Professional Liability Coverage Part. Or: Professional Liability with Optional Pollution (if insured has separate CGL coverage). Nose Coverage and Prior Acts Available . Defense costs can be in addition to or included in policy limits. First Dollar ...

    By CapSpecialty based in Pearl River, NEW YORK (USA).

  • Analytical Services for Highly Potent and Cytotoxic Substances

    Solvias adopted the trend towards ever more highly potent and cytotoxic substances and is consequently offering virtually all analytical services for such compounds. Required protective measures such as:

    By Solvias AG based in Kaiseraugst, SWITZERLAND. from Analytical Services Service line

  • Indoor Air Quality Services

    Indoor Air Quality, Mold, Lead and Asbestos are some of today's most prominent concerns among schools, office buildings, factories, retirement communities and hospitals, with indoor air pollution consistently ranking among the top five environmental risks to public health. We at Aires take a practical and cost effective approach to indoor air ...

    By Aires Consulting Group, Inc. based in Batavia, ILLINOIS (USA).

  • Soil Gas Vapor Intrusion Service

    Centek Laboratories, LLC Air Testing Laboratory has extensive experience sampling and analyzing a broad range of air contaminants including, but not limited to, Volatile Compounds, Air Toxics, and Hazardous Air Pollutants. In fact, Centek Laboratories, LLC opened it doors in 2003 working with New York State to develop and implement the NYSDOH Soil ...

    By Centek Laboratories, LLC based in Syracuse, NEW YORK (USA).

  • Asbestos Analysis: Airborne Fiber Count (NIOSH 7400)

    Asbestos analysis includes testing of air sample for asbestos and other fibers by PCM. It is used primarily for estimating asbestos concentrations in air. It is used to show compliance with limits set by NIOSH, OSHA, and other regulatory agencies. The method does not differentiate between asbestos and other fibers and can also be used to estimate ...

    By EMLab P&K based in South San Francisco, CALIFORNIA (USA). from Asbestos Lab Analysis Service line

  • Asbestos Analysis: OSHA With TWA

    Asbestos analysis includes testing of air sample for asbestos and other fibers by PCM via NIOSH 7400 and calculating the Time Weighted Average (TWA). TWA's are used for personnel sampling and the most common objective of performing a TWA sampling is for compliance with OSHA limits. More than one sample per individual is required to perform the TWA ...

    By EMLab P&K based in South San Francisco, CALIFORNIA (USA). from Asbestos Lab Analysis Service line

  • Indoor Air Quality Lab Services

    LA Testing offers a wide array of analytical testing services to support environmental investigations focused on asbestos, mold & bacteria (microbiology), lead paint, indoor air quality, and industrial hygiene applications. Our unmatched capacity coupled with a company wide focus on customer satisfaction makes no project too large or too ...

    By LA Testing based in South Pasadena, CALIFORNIA (USA).

  • Asbestos Testing Services

    Cavendish Laboratories Ltd has held UKAS accreditation for its asbestos testing services since 1995. The asbestos testing services help clients meet their obligations under the Control Of Asbestos At Work Regulations 2002. These regulations place a duty of care upon the property owner or employer to prevent exposure of employees, occupants and ...

    By Cavendish Laboratories Ltd. based in Chelmsford, UNITED KINGDOM.

  • Bituminous Materials Testing

    Bituminous road surfacing materials are produced by mixing mineral aggregate with a bitumen binder in predetermined quantities and within defined temperature ranges. Other materials are sometimes added to the mixture, including fibres, polymers and pigments to produce specific performance characteristics.

    By ACS Environmental Testing Ltd. based in Poole, UNITED KINGDOM.

  • Ambient Air Monitoring

    Ambient air monitoring involves the location of air sampling devices for the purpose of defining the kind and quantity of toxic chemicals to which a community is being exposed.  Those devices collect a variety of gases, chemicals and particulates in ambient air.  In turn, laboratories analyze the air samples for their precise content.

    By Stone Lions Environmental Corporation based in Rolling Hills Estates, CALIFORNIA (USA).

  • Environmental Air Sampling for PHC F1 and F2

    LCS Laboratory offers air sampling and laboratory analysis of Petroleum Hydrocarbons (PHC) in ambient air for the purpose of environmental site assessments. The samples are collected on diffusive samplers and require no sampling pumps. This method combines the cost effectiveness and sufficient sensitivity.

    By Laboratory Connection Services (LCS) based in London, ONTARIO (CANADA). from Air Testing Service line

  • Mechanical Engineering Services

    CHA’s mechanical engineers have assisted hundreds of industrial, institutional, commercial and municipal clients across the US with a wide variety of projects. Notably, they have identified measures to optimize energy efficiency and reduce costs that have resulted in over tens of millions of dollars in annual energy and operational savings ...

    By CHA based in Albany, NEW YORK (USA).

  • Analytical Services

    eSpin provides independent analytical laboratory testing services with specialization in characterization of nanofibers for industrial and academic researchers. We have state-of-the-art laboratories and instruments to evaluate your material.

    By eSpin Technologies, Inc based in Chattanooga, TENNESSEE (USA).

  • Ambient Air Monitoring Service

    For either short or long term monitoring programs, Consulair has the expertise and the equipment to measure the following parameters :

    By Consulair based in Quebec, QUEBEC (CANADA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you