Air and Climate Equipment

The Gasmet FCX-Series features a comprehensive range of high performance FTIR process gas analyzers. The wall mounted Gasmet FCX process gas analyzers offer reliable results even when analyzing complex gas mixtures. The Gasmet FCX process gas analyzers incorporates a Fourier Transform Infrared spectrometer, gas cell, and signal processing ...

By Gasmet Technologies Oy based in Helsinki, FINLAND. from Stationary Analyzer Systems Product line

We are proud to introduce OlfoSense 'Intelligent Multi Sensor Array', developed in cooperation with Airsense Analytics GmbH. It represents the latest generation of the electronic nose, completely dedicated to environmental monitoring, providing a monitoring network with multiple units for supervising large areas where emissions are produced. ...

By PCA Technologies SRL based in Pogliano Milanese , ITALY.

Flottweg clarifier separators are used for separating solids from liquids, thereby permitting highly efficient clarification.

By Flottweg SE based in Vilsbiburg, GERMANY. from Separator Product line

The Alpha Blower represents robustness, combined with maximum precision and ultimate safety. This blower has been optimised in terms of flow design and processes. The well-known features have been further improved without neglecting the proven system. Finely graded sizes support the efficiency increase as well as innovative component developments. ...

By Aerzener Maschinenfabrik GmbH based in Aerzen, GERMANY. from AERZEN Positive Displacement Blowers Product line

OSi’s Optical Wind and Visibility sensor (OWV) is a breakthrough in measuring turbulence, large body air / wind movement and atmospheric visibility over a long path (50 to 200 meters) – all in a single, low cost sensor.  The sensor operates on a combination of long path optical extinction and optical scintillation. All the ...

By Optical Scientific Inc. (OSi) based in Gaithersburg, MARYLAND (USA). from New Products Product line

F&J Model DF-40L-8 is a lightweight, small footprint, DC voltage powered air sampling system operable from (1) on-board 4500 mAH NiMH batteries, (2) line power, or (3) vehicle cigarette lighter socket. The DF-40L-8 is well suited for emergency response sampling activities where users do not know whether line power will be available. Typical ...

By F&J SPECIALTY PRODUCTS, INC. based in Ocala, FLORIDA (USA). from AC/DC Powered Emergency Response Air Samplers Product line

The oil removable is a liquid/solid separation operation. Oils and greases being generally lighter than water and naturally tend to rise to the surface. In order to speed up this process, an aerator placed in the centre of the well, diffuses fine bubbles which bring grease and oil particles to the surface. Before they solidify, they are leaded by ...

By EUROPELEC based in Paris, FRANCE. from Other Products - Pretreatment Product line

Briquette presses of the HD (High Density)-Series are specifically designed for compacting problematic materials such as MDF-dust wood chips and metal swarf. An extremely high pressure is generated in a closed chamber which leads to briquettes with a high density – without any additives. Not only circular briquettes with a diameter of 50 mm ...

By WEIMA based in Ilsfeld, GERMANY. from Briquetting - Industrial Briquette Presses Product line

The MicroLab 30 replaces the TruckCheck and is a fully automated oil analyzer that provides diagnostic analysis of engine, generator, power steering, and transmission fluids

By Spectro Scientific based in Chelmsford, MASSACHUSETTS (USA). from All in One Product line

METEOSIM provides worldwide high-resolution meteorological data-sets for AERMOD, CALPUFF and ADMS dispersion modelling. Weather data-sets are generated through the combined use of modelling data by using the Weather Research and Forecasting System combined with local instrumental observed data.

By Meteosim S.L. based in Barcelona, SPAIN.

ACME Steam Superheaters are available for operating pressures of up to 800 PSIG and temperatures up to 1200 deg. F. Steam flow is only limited by practical size considerations. Pressure sections are built to ASME code with National Board or CRN registration. Burners are AGA or CGA listed with UL, CSA or other gas train standards as requested or ...

By Acme Engineering Prod. Ltd. based in Montreal, QUEBEC (CANADA). from Boilers and Super Heaters Product line

Our premium Combustion Air Handling Unit (CAHU) conditions the three ambient air elements to generate a consistently accurate supply of conditioned air to the engine intake, thereby adjusting pressure, temperature and humidity to precise repeatable conditions that conform to end-user specifications. Controlled by our CADET V14

By Sierra Instruments, Inc. based in Monterey, CALIFORNIA (USA). from Test Cell / Engine Environmental Control Systems Product line

Biological desulphurization is operating on the principles of a biotrickling filter which uses sulphur bacteria (thiobacillus) existing in nature to remove the H2S.

By ennox biogas technology GmbH based in Hard, AUSTRIA. from Gas Treatment Product line

The VCEM 5000/51000 represents the latest generation of CODEL’s uni ue flow monitors. These systems measure the velocity of stack gases using a highly accurate time of flight measurement that is derived from a cross correlation analysis of the infra-red emissions of the turbulent gas. Two robust infrared detectors are used for the prime ...

By Codel International Ltd based in Bakewell, UNITED KINGDOM. from Flow Monitors for Stack Emissions Product line

The QUASAR Model M8100FM-EXP Flare Stack Flare Monitor provides continuous monitoring of flared gases from remote locations up to ¼ mile (400 m) away in nearly any climate condition. This makes it ideal for confirming compliance with government-set flaring time limits. The QUASAR utilizes multi-wavelength infrared detection and electronic ...

By LumaSense Technologies, Inc. based in Santa Clara, CALIFORNIA (USA). from E²T - Petrochemical Sensors Product line

The ATN 4 BK-PT is designed for the degassing of all types of industrial cooling devices. With a condensing capacity of 60 KG refrigerant per hour it is the biggest machine of its kind. The demand for large scale degassing of air-conditioning units, vending machines and other industrial cooling and freezing equipment is increasing. With the new ...

By ATN Engineering B.V. based in Stadskanaal, NETHERLANDS.

When you have issues of high calorific value waste gas or a liquid stream then the Process Combustion’s Direct Fired Thermal Oxidisers meet the most stringent requirements of the European Solvents Emissions Directive (SED) and the UK’s Waste Incineration Directive. Designed and built to client’s own specific standards Process ...

By Process Combustion Ltd based in Harrogate, UNITED KINGDOM. from Thermal Oxidizers Product line

Throughout the atomization process, Ecosorb odor eliminator is mixed with water, pumped through pipes/hoses and delivered via nozzles or fans to areas affected by odor. After the Ecosorb droplets are dispersed into the air they neutralize odors on contact. The major advantage of atomization nozzle systems is the level of control they provide. ...

By OMI Industries (OMI) based in Long Grove, ILLINOIS (USA). from Delivery Systems Product line

Static biogas flare combustion is indicated when reclaiming old landfills or to ensure the safety of new landfill where biogas production capacity is limited because of low waste disposal levels of and where electricity is not for to drive various items of equipment.

By CONVECO S.r.l. based in Brescia, ITALY.

Hilite-E Ion Exchange Cartridge line is based on the existing filled cartridges. Instead of an activated adsorbent, the cartridge canister is filled with a dust-free ion exchange resin specifically selected for acid reduction. Life between changeouts can be many times greater than activated adsorbents.

By The Hilliard Corporation - Star Systems Filtration Division based in Elmira, NEW YORK (USA). from HILCO Division - Filter Cartridges Product line