Air and Climate Services

The depth and breadth of Enhesa’s expertise is brought to bear in this suite of EHS compliance requirements intelligence. Not merely a raw data requirements list, the Compliance Intelligence Suite combines our EHS Regulatory Foundations with detailed requirement information to provide premier insight and analysis performed by our global ...

By Enhesa - Global EHS & Product Compliance Assurance based in Brussels, BELGIUM. from EHS Compliance Service line

B&W integrates environmental technologies into new and existing power generation, cogeneration (CHP) and pulp & paper operations to control air emissions, and minimize and mitigate process water usage and discharge: B&W Allen-Sherman-Hoff™ solutions to mitigate wet FGD wastewater and eliminate ash storage ponds. ...

By Babcock & Wilcox MEGTEC LLC based in De Pere, WISCONSIN (USA).

When using a measuring instrument, you need to be confident that your results are accurate and precise. METTLER TOLEDO calibration services deliver this type of confidence. To document the results, we have designed a variety of calibration certificates to meet ISO requirements or other industry standards.

By Mettler - Toledo Int. Inc based in Greifensee, SWITZERLAND. from Calibration and Verification Service line

MEGTEC can review your existing Carbon Adsorption System and offer upgrades and rebuilds that would ensure your equipment is running at maximum efficiency. Running your equipment at its peak performance will save you money and eliminate downtime.

By Babcock & Wilcox MEGTEC LLC based in De Pere, WISCONSIN (USA). from Equipment Services Service line

Your media bed often can be plugged by inorganics or participate that is difficult to remove by bake-out., vacuuming or basic flushing.MEGTEC offers a high volume cleaning system solution that can help restore your equipment's flow and performance.

By Babcock & Wilcox MEGTEC LLC based in De Pere, WISCONSIN (USA). from Equipment Services Service line

Abatement system selection and the final design are based on emission constituents, concentrations and airflow.  Rarely will these process conditions remain unchanged for the life of an oxidizer, possibly resulting in shutdowns, a decrease of DRE (Destruction Removal Efficiency), and increase in ...

By Anguil Environmental Systems, Inc. based in Milwaukee, WISCONSIN (USA). from Oxidizer Aftermarket Services Service line

Our industry-leading experience in air handling, drying, heating, cooling, process, and combustion control can help improve the operating efficiency of your facility and maximize the performance of your equipment. We can help improve your operating efficiencies by analyzing current process energy usage and offer solutions to reduce your energy ...

By Babcock & Wilcox MEGTEC LLC based in De Pere, WISCONSIN (USA).

MEGTEC can supply burner and burner management on oxidizers, dryers, plenums and heat sources. This includes servicing, replacing or upgrading your burner system and controls to: --bring your system to current code-upgrade to meet international standards-replace damaged or leaking components-handle increased production requirements-reduce turndown ...

By Babcock & Wilcox MEGTEC LLC based in De Pere, WISCONSIN (USA). from Equipment Services Service line

B&W MEGTEC designs and supplies environmental compliance solutions and gas cleaning systems and services for industrial processes discharging emissions from solvents used in manufacturing processes: for regulatory compliance, for improvement in working environment and in neighbor relations by odor reduction, for process energy management, for ...

By Babcock & Wilcox MEGTEC LLC based in De Pere, WISCONSIN (USA).

Dimensioning and weighing equipment is often crucial for revenue flow and material handling. We offer certified equipment and extensive consulting services for your order to culminate in a ready for production, validated solution. We also provide sealing and alibi storing of data to validate the data capture process.

By Mettler - Toledo Int. Inc based in Greifensee, SWITZERLAND. from Validation Service line

SoundPLAN GmbH is also working as consultants for noise control, air pollution assessment, environmental assessment and traffic planning. We also offer our services in regards to the generation, verification and quality control of noise related standards.

By SoundPLAN International LLC based in Shelton, WASHINGTON (USA).

Calculation service for noise and air pollution studies. If noise simulations are not the mainstay of your company but a project requires them as accompanying evidence, we can team up with you. Send us the raw data, the geometry and source information and we will create the simulations and return the results in tabular and graphical formats. You ...

By SoundPLAN International LLC based in Shelton, WASHINGTON (USA).

When using a measuring instrument, you need to be confident that your results are accurate and precise. METTLER TOLEDO performs calibration and adjustment procedures using certified reference materials and tools as well as providing full documentation services ensuring traceability and confidence in your measurement system.

By Mettler - Toledo Int. Inc based in Greifensee, SWITZERLAND. from Calibration and Verification Service line

Based on rigorous documentation, extensive training, and long-term proficiency testing, our pipette service centers have achieved the highest level of calibration competency and data integrity when using the gravimetric method. National auditing bodies ensure that the highest calibration standards are being met, so you can focus on your work ...

By Mettler - Toledo Int. Inc based in Greifensee, SWITZERLAND. from Calibration and Verification Service line

The value of a measurement is proportional to its accuracy. An out of specification scale can diminish quality, reduce profits and increase liability. Because each installation, environment and use of a weighing system is unique, documenting accuracy is crucial. Proper calibration with traceable weights is the only way to certify accuracy.

By Mettler - Toledo Int. Inc based in Greifensee, SWITZERLAND. from Calibration and Verification Service line

Once you have completed the initial installation of your equipment, it is extremely important to verify equipment performance on a regular basis, to adhere to the HACCP based standards, and to maintain efficient operation of your factory. An out of specification metal detector, X-ray system or checkweigher can diminish quality, reduce profits and ...

By Mettler - Toledo Int. Inc based in Greifensee, SWITZERLAND. from Calibration and Verification Service line

When using a measuring instrument, you need to be confident that your results are accurate and precise. METTLER TOLEDO calibration services deliver this type of confidence. To document the results, we have designed a variety of calibration certificates to meet ISO requirements or other industry standards.

By Mettler - Toledo Int. Inc based in Greifensee, SWITZERLAND. from Calibration and Verification Service line

Your entire operation can depend on the performance of your pollution control system. It pays to be sure your catalytic oxidizer or carbon adsorption system is ready to do its job. When your catalyst or carbon needs replacement, we work with your staff to determine the best solution for your specific application.

By Babcock & Wilcox MEGTEC LLC based in De Pere, WISCONSIN (USA).

Structured media beds can often be plugged by inorganics or particulate that is difficult to remove with a bake-out, vacuuming, or basic flush. To help maintain the peak performance of regenerative thermal oxidizers and regenerative catalytic oxidizers, B&W MEGTEC offers a high-volume chemical cleaning system solution that can help restore ...

By Babcock & Wilcox MEGTEC LLC based in De Pere, WISCONSIN (USA).

Pellets are typically manufactured from wood chips and sawdust. The wet raw material in usually grinded in a hammer mill and then dried in a rotary dryer heated by a biomass furnace. The material is then collected in dryer cyclones to be pelletized. The air conveying the wet grinded material is cleaned with a particulate filter before going to the ...

By Advanced Cyclone Systems, S. A. based in Porto, PORTUGAL. from Emission Control & Air Dedusting Service line