Only show results available in Connecticut? Ok

SNCR services for Air and Climate

  • Service and Maintenance by ERC

    Here at ERC Technik, our service is more than just service. We offer a whole range of services and maintenance services for industrial firing and flue gas systems which is truly one-of-a-kind.

    By ERC Emissions-Reduzierungs-Concepte GmbH based in Buchholz, GERMANY.

  • Selective Non-Catalytic Reduction

    Selective Non-Catalytic Reduction (SNCR) offers a lower-cost method of reducing nitrogen oxides than Selective Catalytic Reduction. For smaller or older power plants, SNCR is the NOx control installation of choice. It can also sometimes be an interim technology before an SCR can be installed. Although the removal efficiency is between 25 and 35%, ...

    By STEAG Energy Services LLC based in Kings Mountain, NORTH CAROLINA (USA).

  • Fuel Lean Gas Reburn

    Fuel Lean Gas Reburn (FLGR) offers an inexpensive way of reducing NOx emissions by up to 30-40% and can be installed for less than $8/kW. It can also generate SO2 allowance credits in direct proportion to the amount of natural gas that displaces coal, partially offsetting the added costs of reburning.

    By STEAG Energy Services LLC based in Kings Mountain, NORTH CAROLINA (USA).

  • Off-Gas Cleaning

    Clean Off‐Gases for a Neat Environment. Industrial off‐gases may contain substances which should be prevented from escaping into environment. This affects, e.g., thermal waste treatment in primary industry as well as chemical industry. Küttner has already tackled problems like these and worked out several process variants for ...

    By Essen Küttner GmbH & Co. KG based in Essen, GERMANY.

  • SCR and SNCR Optimization Expertise

    Ammonia Injection Balancing, CO Catalyst Efficiency, Temperature Profiling, Flow Rate Profiling, Multiple Locations Simultaneously

    By Montrose Environmental Group, Inc. based in Irvine, CALIFORNIA (USA). from Air Quality Services Service line

  • Process and Environmental Services

    Our robust and high-efficient VOC-Abatement-Systems can deal with a wide range of pollutants and become in combination with additional energy-recovery-systems also very consumable friendly..

    By WK Asia-Pacific Environmental Pte. Ltd. based in Singapore, SINGAPORE.

  • Flue Gas Treatment Services

    The company can undertake projects such as flue gas desulfurization, denitrification, dust removal, and organic volatile matter (voc) treatment. Committed to waste gas and waste treatment in the fields of petroleum, chemical, paper, pharmaceutical, food, metallurgy, electric power, coal, agriculture, etc. Now has ammonia desulfurization, ...

  • NOx & CO Reduction Solutions

    For over 25 years', Mobotec has pioneered a range of technologies to deliver high levels of NOx reduction without the need for catayst-based technologies. Utilizing our ROFA and ROTAMIX technologies, Mobotec has the proven capability to deliver up to 75% NOx reduction, while the business is working with various technologies to achieve the highest ...

    By MOBOTEC based in Naperville, ILLINOIS (USA).

  • Custom Engineered Solutions

    Nacah Tech excels in Customized Direct Thermal Oxidizers for difficult industrial applications with advanced burner technology including low NOX options. To best serve our customers, thermal oxidizer systems may include waste heat boilers, heat exchangers, SCR, SNCR, control panels, and pipe trains. Our systems are individually engineered to fit ...

    By Nacah Tech LLC based in Pittsburgh, PENNSYLVANIA (USA).

  • Ecomb Combustion Consulting Services

    We conduct accurate furnace temperature measurements of flue gases by using a water-cooled suction pyrometer otherwise known as an HVT Probe. The probe in short consists of shielded thermocouple for radiant heat from the combustion process, flue gases are withdrawn past the thermocouple by using a suction pump or an air aspirator. The suction ...

    By Ecomb AB based in Södertälje, SWEDEN.

  • NH3 Monitoring Services

    NH3 (Ammonia) is a colorless gas with a distinctive pungent odor.  NH3 monitoring is essential in coal-fired power plants where NH3 is used to reduce NOx emissions in both SCR and SNCR configurations – which is why a reliable, sensitive and fast response ammonia monitor is vital.  Power plant NO abatement ...

    By Unisearch Associates Inc. based in Concord, ONTARIO (CANADA).

  • Emmission Reduction Services

    Reduction of NOx in Flue Gas; At the combustion of all types of fuels occur, besides the heat energy, unwanted substances which through the flue gas reach the atmosphere and thereby cause environmental pollution. One of the main pollutants is NOX. Depending on the temperature conditions in the furnace room, it is possible to reduce the content of ...

    By Aalborg Energie Technik a/s (AET) based in Aalborg East, DENMARK.

  • FlowVision - SNCR Performance & Optimization Trials Consultancy Services

    Meeting stringent new emissions limits and selecting the correct NOx reduction technology to achieve the required limits can be challenging. To be able to obtain more reliable data that the SNCR process can achieve the desired NOx reduction, FlowVision is able to conduct performance trials with portable test equipment.

    By FlowVision A/S based in Odense N, DENMARK.

  • RE - Consulting Services

    RE Consulting is a division of Reinhold Environmental, Ltd. (RE), a corporation which for 20 years has provided the following services to the power industry: Technical Training, Technical Publications, Technical Conferences. Networking Opportunities.

    By Reinhold Environmental, LTD based in Northbrook, ILLINOIS (USA).

  • Thermal Hazardous Waste Treatment Service

    Thermal oxidation of exhaust air and waste, Chemical and other production processes release a wide variety of contaminated residues such as: exhaust air and off gases, effluents and waste solvents, sludge and solid waste.

    By CTU Clean Technology Universe AG based in Winterthur, SWITZERLAND.

  • Assessments, Upgrades and Optimisation Services

    Give your old energy plant new life! Through upgrades and/or optimisation we can help you obtain a stable operation, increased energy output, and emission levels that comply with today’s standards and legislation.Almost every old plant has the potential to perform even better. New technology provides many opportunities for existing plants to ...

  • Process Optimization Services

    The first step of professional project planning is a preliminary process analyses. It allows for an optimal plant design as well as documentable and reliable warranty values. We offer a mobile flue gas temperature pre-measurement, in order to design the SNCR System specific for each application.

    By M.A.L. Environmental Technology based in Vienna, AUSTRIA. from Engineering Service line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you