Soot Monitoring equipment for Air and Climate

The IMR 2800 P is a portable, continuous measuring flue gas analysis instrument housed in an aluminum case. It measures flue gas  temperature, air  temperature, Oxygen O2, Carbon monoxide CO, Nitric  Oxide NO and Sulfur Dioxide SO2. It can optionally measure Nitrogen Dioxide NO2, Sulfur Dioxide SO2, Hydrogen Sulfide and Hydrocarbons ...

By IMR Environmental Equipment, Inc. based in Saint Petersburg, FLORIDA (USA). from Portable Gas Analyzers Product line

The FluidScan 1000 series handheld Infrared oil analyzer provides direct quantitative measurement of a lubricant’s condition and plays an important role in Machine Condition Monitoring (MCM) for proactive and predictive maintenance in Reliability Management programs. It determines when oil needs to be serviced due to degradation of the oil ...

By Spectro Scientific based in Chelmsford, MASSACHUSETTS (USA). from Battery Powered Oil Analyzer Product line

HM-200 high temperature wet & oxygen transmitter is based on microprocessor as the core, with variable frequency ion type oxygen sensor as measuring unit. Heating pipes can be installed in the outlet of CEMS sampling heating pipes. Flue gas gets into HM-200 by diffusion mode. Signal of humidity and temperature output through the 4-20mA or ...

By Hangzhou Zetian Technology Co., Ltd. based in Hangzhou, CHINA. from Flue Gas Analyzer - Other Monitoring Modules Product line

The InfraCal2 Soot Meter provides an easy-to-use ASTM approved test method for measuring percent soot in diesel engine lubricating oils. The Soot Meter is based on proven IR technology, originally developed by Wilks, and is used in lubrication oil and engine testing laboratories worldwide. It is also ideal for truck, bus or off-highway fleets, ...

By Spectro Scientific based in Chelmsford, MASSACHUSETTS (USA). from Products for Laboratories Product line

Measures the soot number from 0.0 to 9.9. More reliable than a paper scale. Approximately 100,000 measurements on one set of batteries.

By IMR Environmental Equipment, Inc. based in Saint Petersburg, FLORIDA (USA). from Measuring Instruments Product line

Manufactured in Australia, FPC is a combustion catalyst specifically formulated to provide significant benefits to fuel consumers. A true combustion catalyst, this superior diesel fuel additive is used worldwide by small and large diesel consumers, including the mining, power generation, rail, marine and transport industries.

By Fuel Technology Pty Ltd based in Kewdale, AUSTRALIA.

micronAir particle filters protect against fine dusts, and also against pollens, road dust, abraded particles, soot, bacteria, industrial dusts and other respirable ultra-fine particles.

By Freudenberg Filtration Technologies SE & Co. KG based in Weinheim, GERMANY. from Automotive Filters Product line

Since 2002 hundreds of DMS500s have been adopted in over 30 countries worldwide for engine research, development and calibration. A unique combination of measurement capabilities; particle size, particle number (PN) and soot mass (PM) all in real time has made the DMS500 the measurement instrument of choice for OEMs, Tier 1s and Universities ...

By Cambustion Ltd based in Cambridge, UNITED KINGDOM. from Fast Engine Particulate Analyzer Product line

The Aerodyne aerosol mass spectrometer (AMS) is the only currently available instrument capable of providing quantitative size and chemical mass loading information in real-time for non-refractory sub-micron aerosol particles. The AMS couples size-resolved particle sampling and mass spectrometric techniques into a single real-time measurement ...

By Aerodyne Research, Inc. based in Billerica, MASSACHUSETTS (USA). from Aerosol Mass Spectrometers Product line

The Soot Particle Aerosol Mass Spectrometer (SP-AMS) makes real-time, in situ measurements of black carbon containing particles.  The SP-AMS instrument combines the technologies from two proven, commercial aerosol instruments: Aerodyne's Aerosol Mass Spectrometer (AMS) (Canagaratna et al, Mass. Spec. Rev., 26, 185-222, 2007) for quantitive ...

By Aerodyne Research, Inc. based in Billerica, MASSACHUSETTS (USA). from Aerosol Mass Spectrometers Product line

Historically the Differential Mobility Analyzer (DMA) has been used to classify nanoparticles by electrical mobility. This technique has become an internationally accepted standard for ultrafine particle size measurement. The classification in a DMA depends on the ratio between electrical charge and aerodynamic drag on each particle. Since both of ...

By Cambustion Ltd based in Cambridge, UNITED KINGDOM. from Aerosol Science Instrumentation Product line

It's an integrated calibrator. It is a mulit-function calibrator.It is integrated with soap-film flowmeter,middle flowrate meter ,big flowrate meter together.

By China Qingdao Huankong Equipment Co,.Ltd. based in Qingdao , CHINA.

For measuring the soot level manually. Rugged and reliable 10 stroke Soot Test Pump. Long hose: ideal for difficult to reach measurement openings. Non centered soot spot, allows many tests on one filter, easy to compare. 2 filter technology.

By Wöhler based in Bad Wünnenberg, GERMANY. from Soot and Particulate Monitoring Instruments Product line

The SP2 is Droplet’s premier instrument for direct measurement of black carbon in individual aerosol particles. The SP2 delivers unmatched detail about black carbon particles, including mass, size, heat of vaporization, and coating – critical information for characterization of pollution sources, accurate description of optical ...

By Droplet Measurement Technologies (DMT) based in Longmont, COLORADO (USA). from Black Carbon Product line

Bacharach’s PCA® 400 offers everything you and your technicians need to commission, tune, maintain and certify any boiler. It is perfect for spot-checking and tuning your engines with the high-range CO sensor and available sample conditioner. Whether it's boiler combustion or emissions testing of your natural gas, stationary genset ...

By IM Environmental Equipment Germany GmbH based in Heilbronn, GERMANY. from Flue Gas Analysis- Industrial Applications Product line

Microwave/resistance/hot air hybride belt furnace, ASW insulation, gas and underpressure tight, Tmax 1000 °C

By Linn High Therm GmbH based in Eschenfelden, GERMANY. from Hybride Systems Product line

testo REXS is installed in a rolling 19-inch rack. Easy to learn how to use, thanks to its simple design and clear control elements. Check and monitor control parameters using the indicator lights, display and software.

By Testo SE & Co. KGaA based in Lenzkirch, GERMANY.

The requirement for on-line machinery and oil condition monitoring is becoming evermore apparent as maintenance costs increase and production capacity and equipment performance are maximized. One of the primary functions of a lubricant is to preserve the cleanliness of a combustion engine's mechanical parts. The cleanliness of the mechanical parts ...

By AD Systems based in Saint-André-sur-Orne, FRANCE.

The exhaust gas analyzer IM1100F is designed to measure exhaust gases of LPG Forklift Trucks. The analyzer measures the Carbon Monoxide CO content in volume percent as requested by European and Worldwide regulations. The measured CO value can be saved or printed. The analyzer comes complete with a flexible probe, IR-printer (only ...

By IM Environmental Equipment Germany GmbH based in Heilbronn, GERMANY. from Flue Gas Analysis- Forklift Trucks Product line

miniCAST Series 5200 produce real combustion soot particle by using a well defined flame that simulates the combustion in the modern combustion engines. The operation principle is based on solid know-how and practical experiences from more than 16 years leading aerosol research and development activities. miniCAST Series 5200 are designed for ...

By Jing Ltd. based in Zollikofen, SWITZERLAND.