Thermal Oxidizers Downloads

  • Premium

    Model HR 160, HR160 - Thermowells & Tubes - Brochure

    TTEC manufactures Thermocouple Assemblies for severe high temperature corrosive environments. These assemblies utilize an HR160 Thermowell or Protection Tube. HR160 is a solid, solution strengthened NI-Co-Cr-Si Alloy with outstanding resistance to various forms of high temperature corrosion attack. Outstanding High Temperature Corrosion Resistance. High levels of Cr & Si combine to form a ...

  • Premium

    Model Grade LT-1 - Metal-Ceramic Thermocouple Protection Tubes - Datasheet

    Metal Ceramic, Grade LT-1 - hard, abrasion-resistant and dense - is a slip-cast composite of two compatible high temperature materials, chromium and aluminum oxide. Products made from Grade LT-1 material possess three properties of particular interest: Superior oxidation resistance to 2500ºF. Thermal conductivity comparable to that of stainless steel. Good resistance to wetting by most ...

  • Premium

    Model HR160 - Thermowells & Tubes - Datasheet

    TTEC manufactures Thermocouple Assemblies for severe high temperature corrosive environments. These assemblies utilize an HR160 Thermowell or Protection Tube. HR160 is a solid, solution strengthened NI-Co-Cr-Si Alloy with outstanding resistance to various forms of high temperature corrosion attack. Outstanding High Temperature Corrosion Resistance. High levels of Cr & Si combine to form a ...

  • Premium

    Anguil - Model RTO - Regenerative Thermal Oxidizer - Brochure

    The Regenerative Thermal Oxidizer (RTO)destroys Hazardous Air Pollutants (HAPs), Volatile Organic Compounds (VOCs) and odorous emissions that are often discharged from industrial or manufacturing processes.Anguil RTOs achieve emission destruction through the process of high temperature thermal oxidation, using the proper mix of temperature, residence time, turbulence and oxygen to convert ...

  • Premium

    Anguil - Model Catox - Catalytic Recuperative Oxidizer - Brochure

    The Anguil Catalytic Recuperative Oxidizer destroys Hazardous Air Pollutants (HAPs), Volatile Organic Compounds (VOCs) and odorous emissions that are often discharged from industrial processes. The air pollution control device achieves emission destruction at significantly lower temperatures than thermal oxidation through the use of catalyst, converting pollutants to carbon dioxide, water vapor ...

  • Premium

    Anguil - Emission Concentrator - Brochure

    Typical air pollution control projects focus on the capture mechanism and a destruction device. With regulations driving towards higher capture efficiencies, combustion devices must treat larger volumes of air with lower concentration of pollutants. The Anguil concentrator is an adsorption system designed to concentrate large volume, low concentration process exhaust into a much smaller, highly ...

  • Premium

    Anguil - Model DFTO - Direct Fired Thermal Oxidizer - Brochure

    The Anguil Direct Fired Thermal Oxidizer (DFTO) destroys Hazardous Air Pollutants (HAPs) and Volatile Organic Compounds (VOCs) that are dischargedfrom industrial or chemical process exhausts. The DFTO achieves destruction of pollutants by the process of combustion.VOCs and HAPs are oxidized to carbon dioxide and water vapor with the proper combination of temperature, residence time and turbulence ...

  • Premium

    Anguil - Model RCO - Regenerative Catalytic Oxidizer - Brochure

    The Anguil Regenerative Catalytic Oxidizer (RCO) destroys Hazardous Air Pollutants (HAPs), Volatile Organic Compounds (VOCs) and odorous emissions that are often discharged from industrial processes. The RCO achieves emission destruction through the process of thermal and catalytic oxidation, converting the pollutants to carbon dioxide and water vapor while reusing the thermal energy generated to ...

  • Premium

    Anguil - Model TRO - Thermal Recuperative Oxidizer - Brochure

    The Anguil Thermal Recuperative Oxidizer destroys Hazardous Air Pollutants (HAPs), Volatile Organic Compounds (VOCs) and odorous emissions that are often discharged from various industrial processes. The air pollution control device uses the proper mix of temperature, residence time, turbulence and oxygen to achieve destruction or thermal ...

  • Premium

    Oxidation Reduction Potential (ORP)/Redox - Application Bulletin

    Oxidation Reduction Potential or Redox is the activity or strength of oxidizers and reducers in relation to their concentration. Oxidizers accept electrons, reducers lose electrons. Examples of oxidizers are: chlorine, hydrogen peroxide, bromine, ozone, and chlorine dioxide. Examples of reducers are sodium sulfite, sodium bisulfate and hydrogen sulfide. Like acidity and alkalinity, the increase ...

  • Premium

    Process Combustion - Thermal-Oxidiser - Brochure

    Process Combustion’s direct fi red thermal oxidisers can treat very high concentrations of volatile organic compounds (VOC’s) in waste gas and waste liquid streams safely and effectively. The waste streams, in some cases, can be injected through the burner system and be used as a fuel. Additional energy saving equipment such as waste heat boilers or secondary heat recovery systems can ...

  • Premium

    ProMinent Dulcodes - Model A - UV System - Brochure

    Flow up to 809 m3 /h. The UV system Dulcodes A has a compact design. Outputoptimised medium pressure lamps ensure effective disinfection of potable water and the photochemical breakdown of oxidants and/or combined chlorine. The system is fitted with electronic ballasts, which continuously adjust the lamp output, either via an external signal, such as the flow rate, or by specification of a ...

  • Premium

    Tobacco Drying & Incineration Recuperative Thermal Oxidiser - Brochure

    www.process-combustion.co.uk +44 (0) 1423 879944 • Process Combustion have supplied several thermal oxidiser and process heater units for the tobacco processing industry. • The thermal oxidiser provides heat into the tobacco drying loop using a recycle heat exchanger. An exhaust stream from the drying loop is supplied to the thermal ...

  • Premium

    Leather Waste Processing Recuperative Thermal Oxidiser - Brochure

     Process Combustion have designed and supplied a thermal oxidiser, boiler and gas clean-up system for the £6 million thermal energy plant at Scottish Leather Group’s manufacturing site at Bridge of Weir, Glasgow, ...

  • Premium

    Dürr Megtec – Epsilon® Regenerative Thermal Oxidizer RTO – Brochure

    The Epsilon® regenerative thermal oxidixer (RTO) from Dürr Megtec is a modularized multi-canister oxidizer offering a highly flexible design that makes it appropriate for many applications. The Epsilon® RTO features an innovative compact design that is engineered to deliver low operating and capital costs, and guaranteed VOC destruction ...

  • Premium

    Carbon Filters Odour Control in the Water Industry - Brochure

    We offer a comprehensive range of activated carbon, impregnated carbon, oxidising alumina media, and hybrid, multi-media filters. For the Middle East market we also offer in situ water and chemically regenerable carbon. An ERG dry media filter may be used as a standalone filter for polishing a chemical scrubber discharge or as part of a DryCat system. All our dry media filters require no ...

  • Premium

    FluidScan - Model 1100 - Handheld Infrared Oil Analyzer - Application Note

    Turbine oils typically are formulated to have high thermal stability, oxidation resistance, and excellent water separation. Lubricants available specifically for gas turbines or steam turbines are designed with specific additive formulations, but there are also many oils that can work with all different types of turbines. Gas turbines have the tendency to build up sludge and varnish whereas steam ...

  • Premium

    Application Note: Measuring Water Contamination in Industrial Oils: A Practical Alternative to Karl Fischer Titration

    Introduction Turbine oils typically are formulated to have high thermal stability, oxidation resistance, and excellent water separation. Lubricants available specifically for gas turbines or steam turbines are designed with specific additive formulations, but there are also many oils that can work with all different types of turbines. Gas turbines have the tendency to build up sludge and varnish ...

  • Premium

    ERG - Toxic Waste & VOC Destruction Systems - Brochure

    Thermal oxidation is an excellent method of destroying toxic and unwanted chemicals, and converting them into benign and harmless compounds. This is particularly applicable where the toxic materials are organic and is a more environmentally benign disposal method than landfill. The process can be combined with energy recovery techniques to minimise operating ...

  • Premium

    ERG - Thermal Oxidisers - Brochure

    Thermal oxidation is a well established method of treatment for process exhaust gases containing volatile organic compounds. It can also be very effective in treating organic liquid waste streams contaminated with toxic materials. The process operates in the range of 750 ...

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you