Only show results in Virginia? Ok

Air and Climate Training

  • Premium

    NIR Quantitative Calibration Models & Measurements Training

    Target Audience: Customers responsible for NIR application development and support.

  • Premium

    Oxygen Gas-Phase Measurement – Without A Sampling System!

    This 20-minutes webinar will showcase major benefits that result from the use of amperometric measurement systems in hazardous as well as non-hazardous area.

  • Premium

    Webinar : ANA – Calibration in Thermal Analysis

    You expect that your thermal analysis instrument is always accurate, true and precise and delivers reproducible results within a given range. A calibration determines whether your module is delivering correctly measured values or needs an adjustment. In Thermal Analysis, different parameters must be calibrated (e.g. temperature, heat flow, mass, ...

    By Mettler - Toledo Int. Inc based in Greifensee, SWITZERLAND. from Webinar : ANA – Calibration in Thermal Analysis Training line

  • Premium

    Webinar : High-pressure DSC

    Increased pressure influences all physical changes and chemical reactions in which a change in volume occurs. For material testing, process development, and quality control there is often no alternative to DSC measurements under pressure. High-pressure DSC allows you to measure samples under defined atmospheres at up to 10 MPa as a function of ...

    By Mettler - Toledo Int. Inc based in Greifensee, SWITZERLAND. from Webinar : High-pressure DSC Training line

  • Premium

    Webinar : Thermal Optical Methods

    This Webinar covers three optical methods that are used in combination with DSC: DSC-Microscopy, DSC-Chemiluminescence, DSC-Photocalorimetry. These exciting techniques will be explained in detail. Numerous application examples will be given to illustrate the benefits of the three optical techniques. METTLER TOLEDO offers for each technique a ...

    By Mettler - Toledo Int. Inc based in Greifensee, SWITZERLAND. from Webinar : Thermal Optical Methods Training line

  • Premium

    NIR ID, Cluster Analysis and Qualitative Measurements

    Target Audience: Responsible person for NIR application development and support.

    By BÜCHI Labortechnik AG based in Postfach, SWITZERLAND. from NIR ID, Cluster Analysis and Qualitative Measurements Training line

  • Premium

    Webinar : Calibration in Thermal Analysis

    You expect that your thermal analysis instrument is always accurate, true and precise and delivers reproducible results within a given range. A calibration determines whether your module is delivering correctly measured values or needs an adjustment. In Thermal Analysis, different parameters must be calibrated (e.g. temperature, heat flow, mass, ...

    By Mettler - Toledo Int. Inc based in Greifensee, SWITZERLAND. from Webinar : Calibration in Thermal Analysis Training line

  • Premium

    Product Training

    Geotech offers hands-on bespoke training days for all customers on our ATEX certified range of landfill gas analysers and pneumatic AutoPumps.  Training days can be tailored to suit your requirements and we can meet the needs of first time users, refresher courses or advanced monitoring techniques. The gas analyser training day can cover ...

    By QED Environmental Systems Ltd. based in Coventry, UNITED KINGDOM.

  • Premium

    Aerzen Training

    More Competence for your Technical Personnel. You prefer to have your operation and maintenance training courses for AERZEN machines with your own staff? No problem: AERZEN Field Service will be glad to provide you with the necessary expertise. Training will take place at AERZEN parent company or at your factory. Your users and maintenance staff ...

    By Aerzener Maschinenfabrik GmbH based in Aerzen, GERMANY.

  • Premium

    Training

    Although OPSIS product offers are state-of-the-art, they are never better than the humans interacting with them; whether at installation, maintenance or just regular use of them. OPSIS has therefore developed multiple training programmes under which both distributors’ staff and end customers can obtain both theoretical and practical ...

    By Opsis AB based in Furulund, SWEDEN.

  • Premium

    Training

    Siemens provides a range of products and services in support of our Process Gas Analyzers. All of our training courses are designed to improve the performance of the people who work on these analyzer systems. Those who configure, operate, or maintain these analyzers will find the courses designed to meet their particular needs.

    By Siemens Industry, Inc. - Process Analytics based in Houston, TEXAS (USA).

  • Premium

    CERC - ADMS-Urban Introductory Training Course

    The aim of the ADMS-Urban training course is to introduce the ADMS-Urban software as a tool for assessing air quality across large areas, using worked examples to develop familiarity with main model input parameters and output, based on modelling small numbers of pollution sources.

    By Cambridge Environmental Research Consultants (CERC) based in Cambridge, UNITED KINGDOM.

  • Premium

    CERC - EMIT Introductory Training Course

    It is aimed primarily at anyone collating data on large numbers of sources releasing emissions to air, including the calculation of emissions. One example is local authorities involved in the review and assessment process. In brief, EMIT is an EMissions Inventory Tool, which can be used to store, manipulate and assess emissions data from a variety ...

    By Cambridge Environmental Research Consultants (CERC) based in Cambridge, UNITED KINGDOM.

  • Premium

    Training

    Our customised training courses deliver the essential application, product and measurement know-how to achieve optimum performance from your AMETEK Land instrument. They cover infrared, combustion efficiency and emissions monitoring measurement theory at knowledge levels from basic to intermediate. We also provide training in hands-on repair, ...

    By AMETEK Land based in Dronfield, UNITED KINGDOM.

  • Premium

    CERC - Software Support and Training

    CERC provides comprehensive support and training for its software products: details on our training courses, including scheduled course dates and prices, information about the latest/upcoming user group meetings,information on helpdesk, information on how to access the user area, documentations including user ...

    By Cambridge Environmental Research Consultants (CERC) based in Cambridge, UNITED KINGDOM.

  • Premium

    Process and Cooling Water Course

    H2O provides together with its partner AZES Energy Solutions, trainings programs on topics related to cooling-water and process water to give operators and managers the opportunity to learn more about cooling and process water treatment.

    By H2O Biofouling Solutions B.V. based in Bemmel, NETHERLANDS.

  • Premium

    MiniLab Series - Operation Course

    This three-day course provides foundational training for the daily operation, routine maintenance, and common troubleshooting for the MiniLab 53.  A fourth day is added to cover the spectrometer included in the MiniLab 153.

    By Spectro Scientific based in Chelmsford, MASSACHUSETTS (USA).

  • Premium

    Hg CEM & Laboratory Training

    A well structured training program pays immediate dividends, and our customers tell us Tekran training programs are among the best. It takes a well trained operator to get the highest performance out of their analytical equipment. At Tekran, we have spent considerable effort developing comprehensive training programs to provide our customers the ...

    By Tekran Instruments Corporation based in Toronto, ONTARIO (CANADA).

  • Premium

    CERC - ADMS Standard Training Courses

    The course aims to introduce the ADMS software as a tool for assessing air quality in the vicinity of industrial sites, using worked examples to develop familiarity with main model input parameters and output, based on modelling small numbers of pollution sources.

    By Cambridge Environmental Research Consultants (CERC) based in Cambridge, UNITED KINGDOM.

  • Premium

    CERC - ADMS-Roads Standard Training Courses

    The course aims to introduce the ADMS-Roads software as a tool for assessing air quality near a small road network, using worked examples to develop familiarity with main model input parameters and output, based on modelling small numbers of pollution sources. The course considers the choice and use of meteorological data with ADMS-Roads, the use ...

    By Cambridge Environmental Research Consultants (CERC) based in Cambridge, UNITED KINGDOM.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you