Applications
-
Premium
Visual inspection solutions for automotive industry
In the automotive field, borescopes used for remote visual inspection, make it possible to investigate a variety of problems without tearing apart the entire engine block. This allows you to inspect the internal components of the engine for carbon deposits, wear and tear, to pinpoint sources of unwanted noise, identify corrosion and confirm component failure. Routine quality control inspections at the production stage should also occur frequently. Sites include fuel injector nozzles, cast cylinder heads and ...
By Fiberscope.net by Medit Inc. based in Winnipeg, MANITOBA (CANADA).
-
Premium
Gas detection in the transportation industry
The manufacture and use of motor vehicles is always associated with gas and fire hazards and other risks. This applies to the production facilities in which individual components are manufactured or the vehicles are assembled, as well as tunnels and parking garages in which exhaust gases can accumulate. The type of gas hazard differs in the areas of application, but the goal to be achieved remains the same everywhere - the safety of people and the infrastructure. With its wide range of gas monitoring products, ...
By Teledyne Gas and Flame Detection based in Arras Cedex, FRANCE.
-
Premium
Measurements Solutions for Automotive
The automotive industry is dependent on the adoption of advanced manufacturing technologies to enable the production of high quality, precision components that are crucial to ensuring performance. The global push for higher efficiency standards, tighter emission controls and a reduction in the allowable cabin noise have prompted a shift to smoother surfaces and complementary metrology methods. The industry is also witnessing the transition from off-line quality control inspection to on-line or in-line ...
By Zygo Corporation - AMETEK, Inc based in Middlefield, CONNECTICUT (USA).
-
Premium
Erosion and dust control solutions for heavy haul road stabilizer sector
Used on heavy haul roads, Envirotac prevents dust, wear, and erosion. Further, it helps saving water, preventing equipment damage due to dust, preventing loss of tire tread due to road wear and reducing emissions from equipment that would normally be used to maintain the ...
By Environmental Products & Applications, Inc. based in La Quinta, CALIFORNIA (USA).
-
Premium
Machine condition monitoring for off-highway heavy equipment
Overview Machine Condition Monitoring based on oil analysis has become an important, if not mandatory, maintenance practice for the construction, mining, and agricultural industries. Equipment in these industries are frequently exposed to severe environmental and working conditions. An effective oil analysis program will keep important assets in operation by reducing unexpected failures and costly unscheduled ...
By AMETEK Spectro Scientific based in Chelmsford, MASSACHUSETTS (USA).
-
Premium
Air pollution control for the automotive manufacturing industry
Anguil’s Engineering expertise and flexible solutions guarantee compliance and optimized performance so your automotive plant can focus on production and avoid supply chain ...
By Anguil Environmental Systems, Inc. based in Milwaukee, WISCONSIN (USA).
-
Premium
Erosion and dust control solutions for transportation sector
Envirotac line of polymers have been used to construct roads around the world. Our polymers cross link the soils at a nano level creating a tough durable surface that will stand up to Heavy Haul trucks and the daily grind of vehicular traffic. If you are using Chlorides, Lignin's, or Enzymes, make the switch to a superior road stabilizing ...
By Environmental Products & Applications, Inc. based in La Quinta, CALIFORNIA (USA).
-
Premium
Mineral-based technologies solutions for the automotive & commercial vehicle industry
High Value-Add Products for Automotive & Commercial Vehicles. MTI provides a variety of high-value products used in the automotive and commercial vehicle ...
By CETCO based in New York, UNITED KINGDOM.
-
Premium
Compressed air and industrial gases solutions for automotive industry
Energy savings solutions in the automotive industry. Compressed air consumption is vital in the car industry. Measuring and monitoring of your compressed air and other utilities will lead to significant system improvements and energy savings. With the introduction of compressed air, the automotive industry has been significantly improved in terms of workers’ safety and overall plant efficiency. Nowadays you will find compressed air in almost all aspects of the car manufacturing process, like vehicle ...
By VPInstruments based in Delft, NETHERLANDS.
-
Premium
Recycling equipments for automobile Crushers
Automobile Crushers, Loggers, & Balers featuring MAC crushers, loggers, and balers, leading the industry for nearly 50 ...
By Granutech-Saturn Systems based in Grand Prairie, TEXAS (USA).
-
Premium
Chemiluminescense based analyzer for automotive, aviation, marine, and combustive engines sector
Focuses on high NOx, NOx-related and multigas-concentrations up to 10’000 ppm. Parameters included are NO, NO2, NOx, NH3, NOx-amines, O2 and CO2. The applications are characterized by demanding sample gas conditions, such as in automotive, aviation, naval, or combustive engine emissions, as well as in catalyst production. ...
By ECO Physics AG based in Duernten, SWITZERLAND.
-
Premium
Emissions Monitoring for Tunnels
The Opsis monitoring solution is designed for high-quality gas measurement in traffic tunnels. The monitoring systems have been approved by the Germany TÜV and the U.S. EPA among ...
By OPSIS AB based in Furulund, SWEDEN.
-
Premium
Gas analyzers for automotive industry
airmOzone PAMS (30 or 58 compounds) CH4-NMTHC or UHC-CH4-C2H6 Case Study airmOzone ...
By Chromatotec Group based in Val de Virvée, FRANCE.
-
Thermal structures insulation for mass transit/public transportation industry
Thermal Structures insulation products are designed to match the unique needs of public transportation, offering uncompromising insulation that provides unmatched ...
By Thermal Structures, Inc. based in Corona, CALIFORNIA (USA).
-
Turbine machines for transportation
We are among the main European suppliers of turbochargers for goods vehicles, locomotives, ships and partially also for cars. We specialize in precision castings of wheels, blades and other turbocharger components as well as their subsequent precision machining. We benefit from the latest technologies in precision casting employed by our Precision Casting Division in the Czech Republic as well as many years of experience. PBS Velká Bíteš has produced turbochargers since 1954. Gradually we ...
By PBS Velká Bíteš, a.s. based in Velká Bíteš, CZECH REPUBLIC.
-
Industrial fluid separation solutions for automotive applications
Clean fluid is the lifeblood of automotive manufacturing. If you can’t stay on top of particulates and contamination, you’re continuously in danger of unscheduled downtime, increased rejection rates—and soaring losses. The solution begins with better filtration and ...
By Trucent based in Dexter, MICHIGAN (USA).
-
Gas detection & hazardous gas monitoring equipments for parking/service garages
Exhaust fumes emanating from fuel burning vehicles are highly toxic and can result in sickness and even death, if not ventilated properly. By monitoring the concentration of these fumes and ventilating based on their concentration, a safe environment can be ...
By Armstrong Monitoring Corporation (AMC) based in Ottawa, ONTARIO (CANADA).
-
Traffic Emissions Monitoring
Traffic, especially in urban locations, is one of the greatest contributors to air pollution. Traffic produces a variety of different pollutants that include particulates, NO2, NO, CO, hydrocarbons and in some cases SO2. The monitoring of roadside pollution can be challenging as often it is difficult to find suitable locations for large air quality monitoring systems and many sites that are available can be too far away to be representative of roadside air pollution. Roadside pollution concentrations can ...
By Acoem based in Knoxfield, AUSTRALIA.
-
Spill containment for tanker trucks/ refuelers
The SafeGuards line of spill containments include a number of products that are specifically designed for tanker truck full secondary containment. From transloading concerns; staged tankers to dropped tanker applications we have the most user friendly drive through containments in the industry. Portable to permanent we can solve your problem! We can help you with your SPCC loading rack compliance plan with our 2G Environmental Professional Engineering (PE) affiliated ...
By Millennium Enterprises, Inc. (MEI) based in Marietta, GEORGIA (US) (USA).
-
Environmental Management Solutions for Automotive Industry
Improving performance, resilience and safety throughout the automotive supply chain. BSI business improvement services for the automotive industry. The automotive industry is being transformed by megatrends such as digitalization and globalization. Organizations need to respond and innovate to remain relevant. Our range of standards, certification, training and consultancy services help businesses throughout the automotive supply chain to be agile and continually ...
By British Standards Institution (BSI) based in Herndon, VIRGINIA (USA).
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you