Companies
Pro-Teqt, LLC
Applications
Mold & Grime Cleaner Prep and Mold ...

Mold & Grime Cleaner Prep and Mold Prevention Spray for HVAC Applications - Air and Climate

FromHilltop Distribution, Inc.

SHARE

Use fogger, airless sprayer, or hand pump sprayer with fine mist nozzle to disperse our Mold Prevention Spray into ductwork. First remove duct air filter and turn fan on. For large application jobs, we recommend using basic protective gear. Our products are non-toxic with zero VOCs but always best to be safe.

Most popular related searches

mold prevention

indoor air quality

personal protection system

mold remediation project

airless sprayer

indoor air quality improvement

personal protection

For mold remediation projects, follow the IICRC S520 or similar guidelines.
Even though our Mold Prevention spray is non-toxic and has zero VOCs, we still recommend using appropriate Personal Protective Equipment.
- For example, for small applications we recommend a coverall suit, respirator mask, protective goggles and rubber gloves while applying our Mold Prevention Spray.
First ensure that ducts are clean.
Remove air filter(s).
Open all supply vents.
Turn on fan.
At each return vent, use fogger, airless sprayer, or hand pump sprayer with fine mist nozzle to disperse Endurance BioBarrier’s Mold Prevention product into the residential or commercial ductwork system.
When you start to see mist coming out of the supply vent(s), keep fogging or spraying for another 1 or 2 minutes.
Turn off fogger or sprayer and let fan run for another minute.
Then turn off fan, or move to the next return vent and repeat steps 3 to 9.
When mist exits supply vents, the product will be lightly coating surfaces in the respective room.
- This is a BONUS benefit because those surfaces will now have long lasting protection against mold, mildew, germs and musty odors.
- A great way to eliminate the spores that get stirred up and become airborne during the ductwork installation or cleaning job and get dispersed into rooms.
- If client wants attics and crawlspaces treated due to risk of kicked up spores, then use fogger in those areas.
- Safe for all surfaces, including carpets and fabric. Won’t harm plants.
- Our Prevention Spray is certified non-toxic, but we recommend covering food preparation surfaces with plastic or cloth.
Since our Mold Prevention Spray is non-toxic, non-corrosive and has zero VOCs, it is perfectly safe to use in air ducts and on all interior surfaces, including fabrics and carpets. Won’t harm HVAC fan mechanisms.
Allow all ductwork and room surfaces to air dry for at least one hour.
Unless oversprayed, our Mold Prevention Spray forms a clear, protective, microscopic barrier when dry. In order to check whether all target surfaces were properly coated, shine a UV black light on them to see if they glow. If you don’t see a glow in a target area, then lightly re-apply. This is a convenient way to ensure that your team covered all critical areas.
When finished, be sure to use fresh water to flush out the fogger, sprayer and nozzle. This will prevent clogging.
The active ingredients are a proprietary blend of biocides and fungicides that are EPA / TSCA registered to inhibit 99.9% of mold, mildew and germs within 48 hours. This produces a much greater improvement to indoor air quality (IAQ) than you will get by just cleaning the ducts.