ASTM International Standards for Sustainability in Building: 3rd Edition

0

Includes all of the ASTM standards that are referenced by the U.S. Federal Green Construction Guide for Specifiers as of January 2007.

This new edition, on CD-ROM only, includes nearly 150 ASTM standards that address the sustainable design, construction, and operation of products used in building. These standards deal with various aspects of sustainability for a particular building material and the general principles for life cycle assessment.

Standards cover:
• Site and Ecosystems
• Water
• Energy
• Materials
• Indoor Environmental Quality
• Operations

A 'must-have' resource for all those in the public and private sector who must meet the growing demand for sustainable building.

A valuable reference for planners and developers; architects; landscapers; engineers; general contractors and subcontractors; financial organizations related to the building industry; insurance organizations; building material and product manufacturers; government agencies and building officials.

ASTM International Standards on Sustainability in Building: 3rd Edition

Table of Contents

A 478 Specification for Chromium-Nickel Stainless Steel Weaving and Knitting Wire
A 580/A 580M Standard Specification for Stainless Steel Wire
A 653/A 653M Standard Specification for Steel Sheet, Zinc-Coated (Galvanized) or Zinc-Iron Alloy-Coated (Galvannealed) by the Hot-Dip Process
B 813 Standard Specification for Liquid and Paste Fluxes for Soldering of Copper and Copper Alloy Tube
C 33 Standard Specification for Concrete Aggregates
C 67 Standard Test Methods for Sampling and Testing Brick and Structural Clay Tile
C 128 Standard Test Method for Density, Relative Density (Specific Gravity), and Absorption of Fine Aggregate
C 131 Standard Test Method for Resistance to Degradation of Small-Size Coarse Aggregate by Abrasion and Impact in the Los Angeles Machine
C 136 Standard Test Method for Sieve Analysis of Fine and Coarse Aggregates
C 289 Standard Test Method for Potential Alkali-Silica Reactivity of Aggregates (Chemical Method)
C 311 Test Methods for Sampling and Testing Fly Ash or Natural Possolans for Use as a Mineral Admixture in Portland-Cement Concrete
C 593 Standard Specification for Fly Ash and Other Pozzolans for Use With Lime
C 595 Standard Specification for Blended Hydraulic Cements
C 618 Standard Specification for Coal Fly Ash and Raw or Calcined Natural Pozzolan for Use as a Mineral Admixture in Concrete
C 739 Standard Specification for Cellulosic Fiber (Wood-Base) Loose-Fill Thermal Insulation
C 936 Standard Specification for Interlocking Concrete Paver Units
C 989 Standard Specification for Ground Granulated Blast-Furnace Slag for Use in Concrete and Mortars
C 1240 Standard Specification for Silica Fume Used in Cementitious Mixtures
C 1319 Standard Specification for Concrete Grid Paving Units
C 1338 Standard Test Method for Determining Fungi Resistance of Insulation Materials and Facings
C 1371 Standard Test Method for Determination of Emittance of Materials Near Room Temperature Using Portable Emissometers
C 1386 Standard Specification for Precast Autoclaved AERATED Concrete (PAAC) Wall Construction Units
C 1483 Standard Specification for Exterior Solar Radiation Control Coatings on Buildings
C 1549 Standard Test Method for Determination of Solar Reflectance Near Ambient Temperature Using a Portable Solar Reflectometer
C 1601 Standard Test Method for Field Determination of Water Penetration of Masonry Wall Surfaces
D 198 Standard Test Methods of Static Tests of Lumber in Structural Sizes
D 217 Standard Test Methods for Cone Penetration of Lubricating Grease
D 692 Standard Specification for Coarse Aggregate for Bituminous Paving Mixtures
D 696 Standard Test Method for Coefficient of Linear Thermal Expansion of Plastics Between -30 degreesC and 30 degreesC with a Vitreous Silica Dilatometer
D 698 Standard Test Methods for Laboratory Compaction Characteristics of Soil Using Standard Effort (12,400 ft-lbf/ft3 (600 kN-m/m3))
D 1435 Standard Practice for Outdoor Weathering of Plastics
D 1557 Standard Test Methods for Laboratory Compaction Characteristics of Soil Using Modified Effort (56,000 ft-lbf/ft3(2,700 kN-m/m3))
D 1972 Standard Practice for Generic Marking of Plastic Products
D 2103 Standard Specification for Polyethylene Film and Sheeting
D 2369 Standard Test Method for Volatile Content of Coatings
D 3273 Standard Test Method for Resistance to Growth of Mold on the Surface of Interior Coatings in an Environmental Chamber
D 3786 Standard Test Method for Hydraulic Bursting Strength of Textile Fabrics-Diaphragm Bursting Strength Tester Method
D 3792 Standard Test Method for Water Content of Coatings by Direct Injection into a Gas Chromatograph
D 3864 Standard Guide for Continual On-Line Monitoring Systems for Water Analysis
D 3960 Standard Practice for Determining Volatile Organic Compound (VOC) Content of Paints and Related Coatings
D 4017 Standard Test Method for Water in Paints and Paint Materials by Karl Fischer Method
D 4263 Standard Test Method for Indicating Moisture in Concrete by the Plastic Sheet Method
D 4444 Standard Test Methods for Use and Calibration of Hand-Held Moisture Meters
D 4491 Standard Test Methods for Water Permeability of Geotextiles by Permittivity
D 4552 Standard Practice for Classifying Hot-Mix Recycling Agents
D 4632 Standard Test Method for Grab Breaking Load and Elongation of Geotextiles
D 4716 Test Method for Determining the (In-plane) Flow Rate per Unit Width and Hydraulic Transmissivity of a Geosynthetic Using a Constant Head
D 4833 Standard Test Method for Index Puncture Resistance of Geotextiles, Geomembranes, and Related Product
D 4840 Standard Guide for Sampling Chain-of-Custody Procedures
D 4887 Standard Test Method for Preparation of Viscosity Blends for Hot Recycled Bituminous Materials
D 5106 Standard Specification for Steel Slag Aggregates for Bituminous Paving Mixtures
D 5116 Standard Guide for Small-Scale Environmental Chamber Determinations of Organic Emissions from Indoor Materials/Products
D 5199 Standard Test Method for Measuring the Nominal Thickness of Geosynthetics
D 5161 Standard Test Method for Measuring Mass per Unit Area of Geotextiles
D 5268 Standard Specification for Topsoil Used for Landscaping Purposes
D 5359 Standard Specification for Glass Cullet Recovered from Waste for Use in Manufacture of Glass Fiber
D 5505 Standard Practice for Classifying Emulsified Recycling Agents
D 5539 Standard Specification for Seed Starter Mix
D 5957 Standard Guide for Flood Testing Horizontal Waterproofing Installations
D 5603 Standard Classification for Rubber Compounding Materials—Recycled Vulcanizate Particulate Rubber
D 5663 Standard Guide for Validating Recycled Content in Packaging Paper and Paperboard
D 5759 Standard Guide for Characterization of Coal Fly Ash and Clean Coal Combustion Fly Ash for Potential Uses
D 5792 Standard Practice for Generation of Environmental Data Related to Waste Management Activities: Development of Data Quality Objectives
D 5851 Standard Guide for Planning and Implementing a Water Monitoring Program
D 5852 Standard Test Method for Erodibility Determination of Soil in the Field or in the Laboratory by the Jet Index Method
D 6002 Standard Guide for Assessing the Compostability of Environmentally Degradable Plastics
D 6006 Standard Guide for Assessing Biodegradability of Hydraulic Fluid
D 6007 Standard Test Method for Determining Formaldehyde Concentration in Air from Wood Products Using a Small Scale Chamber
D 6046 Standard Classification of Hydraulic Fluids for Environmental Impact
D 6081 Standard Practice for Aquatic Toxicity Testing of Lubricants: Sample Preparation and Results Interpretation
D 6108 Standard Test Method for Compressive Properties of Plastic Lumber and Shapes
D 6109 Standard Test Methods for Flexural Properties of Unreinforced and Reinforced Plastic Lumber
D 6112 Standard Test Methods for Compressive and Flexural creep and Creep-Rupture of Plastic Lumber and Shapes
D 6117 Standard Test Methods for Mechanical Fasteners In Plastic Lumber and Shapes
D 6155 Standard Specification for Nontraditional Coarse Aggregates for Bituminous Paving Mixtures
D 6245 Standard Guide for Using Indoor Carbon Dioxide Concentrations to Evaluate Indoor Air Quality and Ventilation
D 6261 Standard Specification for Extruded and Compression Molded Basic Shapes Made from Thermoplastic Polyester (TPES)
D 6262 Standard Specification for Extruded, Compression Molded, and Injection Molded Basic Shapes of Poly(aryl ether ketone) (PAEK)
D 6270 Standard Practice for Use of Scrap Tires in Civil Engineering Applications
D 6329 Standard Guide for Developing Methodology for Evaluating the Ability of Indoor Materials to Support Microbial Growth Using Static Environmental Chambers
D 6330 Standard Practice for Determination of Volatile Organic Compounds (Excluding Formaldehyde) Emissions from Wood-Based Panels Using Small Environmental Chambers Under Defined Test Conditions
D 6345 Standard Guide for Selection of Methods for Active, Integrative Sampling of Volatile Organic Compounds in Air
D 6400 Standard Specification for Compostable Plastics
D 6435 Standard Test Method for Shear Properties of Plastic Lumber and Plastic Lumber Shapes
D 6629 Standard Guide for Selection of Methods for Estimating Soil Loss by Erosion
D 6662 Standard Specification for Polyolefin-Based Plastic Lumber Decking Boards
D 6712 Standard Specification for Ultra-High-Molecular-Weight Polyethylene (UHMW-PE) Solid Plastic Shapes
D 6886 Standard Test Method for Speciation of the Volatile Organic Compounds (VOCs) in Low VOC Content Waterborne Air-Dry Coatings by Gas Chromatograpy
D 7186 Standard Practice for Quality Assurance Observation of Roof Construction and Repair
E 80 Standard Guide for Measuring Outdoor Sound Received from a Nearby Fixed Source
E 90 Standard Test Method for Laboratory Measurement of Airborne Sound Transmission Loss of Building Partitions and Elements
E 241 Standard Guide for Limiting Water-Induced Damage to Buildings
E 408 Standard Test Methods for Total Normal Emittance of Surfaces Using Inspection-Meter Techniques
E 413 Standard Classification for Rating Sound Insulation
E 477 Standard Test Method for Measuring Acoustical and Airflow Performance of Duct Liner Materials and Prefabricated Silencers
E 648 Standard Test Method for Critical Radiant Flux of Floor-Covering Systems Using a Radiant Heat Energy Source
E 683 Standard Practice for Installation and Service of Solar Space Heating Systems for One-and Two-Family Dwellings
E 779 Standard Test Method for Determining Air Leakage Rate by Fan Pressurization
E 781 Standard Practice for Evaluating Absorptive Solar Receiver Materials When Exposed to Conditions Simulating Stagnation in Solar Collectors With Cover Plates
E 782 Standard Practice for Exposure of Cover Materials for Solar Collectors to Natural Weathering Under Conditions Simulating Operational Mode
E 823 Standard Practice for Nonoperational Exposure and Inspection of a Solar Collector
E 881 Standard Practice for Exposure of Solar Collector Cover Materials to Natural Weathering Under Conditions Simulating Stagnation Mode
E 948 Test Method for Electrical Performance of Photovoltaic Cells Using Reference Cells Under Simulated Sunlight
E 1021 Standard Test Methods for Measuring Spectral Response of Photovoltaic Cells
E 1038 Test Method for Determining Resistance of Photovoltaic Modules to Hail by Impact with Propelled Ice Balls
E 1040 Specification for Physical Characteristics of Nonconcentrator Terrestrial Photovoltaic Reference Cells
E 1105 Test Method for Field Determination of Water Penetration of Installed Exterior Windows, Skylights, Doors, and Curtain Walls by Uniform or Cyclic Static Air Pressure Difference
E 1171 Test Method for Photovoltaic Modules in Cyclic Temperature and Humidity Environments
E 1333 Test Method for Determining Formaldehyde Concentrations in Air and Emission Rates from Wood Products Under Defined Test Conditions Using a Large Chamber
E 1362 Test Method for Calibration of Non-Concentrator Photovoltaic Secondary Reference Cells
E 1433 Standard Guide for Selection of Standards on Environmental Acoustics
E 1462 Standard Test Methods for Insulation Integrity and Ground Path Continuity of Photovoltaic Modules
E 1596 Standard Test Methods for Solar Radiation Weathering of Photovoltaic Modules
E 1597 Standard Test Method for Saltwater Pressure Immersion and Temperature Testing of Photovoltaic Modules for Marine Environments
E 1609 Standard Guide for Development and Implementation of a Pollution Prevention Program
E 1686 Standard Guide for Selection of Environmental Noise Measurements and Criteria
E 1690 Standard Test Method for Determination of Ethanol Extractives in Biomass
E 1721 Standard Test Method for Determination of Acid-Insoluble Residue in Biomass
E 1755 Test Method for Ash in Biomass
E 1758 Test Method for Determination of Carbohydrates in Biomass by High Performance Liquid Chromatography
E 1799 Standard Practice for Visual Inspections of Photovoltaic Modules
E 1802 Standard Test Methods for Wet Insulation Integrity Testing of Photovoltaic Modules
E 1821 Standard Test Method for Determination of Carbohydrates in Biomass by Gas Chromatography
E 1827 Standard Test Methods for Determining Airtightness of Buildings Using an Orifice Blower Door
E 1830 Standard Test Methods for Determining Mechanical Integrity of Photovoltaic Modules
E 1918 Standard Test Method for Measuring Solar Reflectance of Horizontal and Low-Sloped Surfaces in the Field
E 1971 Standard Guide for Stewardship for the Cleaning of Commercial and Institutional Buildings
E 1980 Standard Practice for Calculating Solar Reflectance Index of Horizontal and Low-Sloped Opaque Surfaces
E 1991 Standard Guide for Environmental Life Cycle Assessment of Building Materials/Products
E 2047 Standard Test Method for Wet Insulation Integrity Testing of Photovoltaic Arrays
E 2114 Standard Terminology for Sustainability Relative to the Performance of Buildings
E 2128 Standard Guide for Evaluating Water Leakage of Building Walls
E 2129 Standard Practice for Data Collection for Sustainability Assessment of Building Products
E 2277 Standard Guide for Design and Construction of Coal Ash Structural Fills
E 2397 Standard Practice for Determination of Dead Loads and Live Loads associated with Green Roof Systems
E 2398 Standard Test Method for Water Capture and Media Retention of Geocomposite Drain Layers for Green Roof Systems
E 2399 Standard Test Method for Maximum Media Density for Dead Load Analysis of Green Roof Systems
E 2400 Standard Guide for Selection, Installation, and Maintenance of Plants for Green Roof Systems
E 2432 Standard Guide for General Principles of Sustainability Relative to Buildings
F 1869 Standard Test Method for Measuring Moisture Vapor Emission Rate of Concrete Subfloor Using Anhydrous Calcium Chloride
F 2034 Standard Specification for Sheet Linoleum Floor Covering
F 2170 Standard Test Method for Determining Relative Humidity in Concrete Floor Slabs Using in situ Probes

Over 60% Updated!
Price:
Price (North America): $260
Price (Elsewhere): $260
Print ISSN:
978-0-8031-5615-9
Launch:
2007

Customer comments

No comments were found for ASTM International Standards for Sustainability in Building: 3rd Edition. Be the first to comment!