ABS-Armaturen GmbH products

Soft sealing on four sides in accordance with seal class 4 (DIN 19569 part 4). Bed sill is turned through at least 130° in the nominal diameter radius to avoid soiling accumulations in the corners, and to increase operational reliability. Use as regulating or throttling protection. The seal pressure can be adjusted and readjusted using linear-functioning PE-UHMW tapered slide bars. Detail PE-UHMW slide bars.

Soft sealing on four sides in accordance with seal class 4 (DIN 19569 part 4). Adjustable, equalised tensioning wedges synchronised with sealing levers for contactless seal lift. The sealing is positive locking, force-closed, tension-restrained and mounted on the plate.

Soft sealing on four sides in accordance with seal class 4 (DIN 19569 part 4). Use as regulating or throttling protection. The seal pressure can be adjusted and readjusted using linear-functioning PE-UHMW tapered slide rails. The ABS Tri-sealing profile is positive locking and force-closed, and is tension-restrained in order to achieve low frictional forces and torques.

Soft sealing on four sides in accordance with seal class 4 (DIN 19569 part 4). Bed sill is turned through at least 130° in the nominal diameter radius to avoid soiling accumulations in the corners, and to increase operational reliability. Use as regulating or throttling protection. The seal pressure can be adjusted and readjusted using linear-functioning PE-UHMW tapered slide bars.

Roller bearing. Protective housing according to EU-Machinery directive 2006/42/EC. Bevel gearboxes. Cross beam. Open-close actuators / Modulating actuators

Genormter, rostfreier Außenvierkantkonus SW27/32 mit Innenvierkant SW19 für mobile Antriebe oder Werkzeugvierkant (Knarre), wälzgelagert auf einer gedübelten Mauerkronen-Konsole aus 1.4301 o. 1.4571.

The handwheel (EKB coated / stainless steel) with ball handle is positioned about 100 mm above floor level. Roller bearing on dowelled-on shaft wall bracket made of 1.4301 or 1.4571.

Backwater flap with flat cover and integrated channel flap, stepped bed 100mm, soft sealing in accordance with DIN 19569 part 4 seal class 3 for dowelling onto structures with flat surfaces in accordance with DIN 18202 tab.3 row 7.

Backwater flap with flat cover and integrated channel flap, stepped bed 100mm, soft sealing in accordance with DIN 19569 part 4 seal class 3 for dowelling onto structures with flat surfaces in accordance with DIN 18202 tab.3 row 7.

Backwater flap with hollow cover and integrated channel flap, stepped bed 100mm, soft sealing in accordance with DIN 19569 part 4 seal class 3 for dowelling onto structures with flat surfaces in accordance with DIN 18202 tab.3 row 7.