Adolf Thies GmbH & Co. KG
14 products found

Adolf Thies GmbH & Co. KG products

Air Pressure

Barograph

A barograph or micro-barograph are recording measuring instruments for the determination of the static absolute air pressure. Being used for meteorological purposes, they are recording values which are corresponding to the aerostatic air pressure at sea level. For this, it is necessary to adjust a barograph after installation acc. to a given air pressure value (reference).

Barometer

A barometer is a measuring instrument for the determination of the static absolute air pressure. Being used for meteorological purposes, the station barometer indicates the aerostatic air pressure at local altitude. In order to compare the measuring value with other air pressure values several corrections, such as altitude correction, are necessary. Only after the corrected calculations of the read value the air pressure value can be compared with other values.

Temperature Recording Instruments

Thies - Hygro-Thermograph instruments

With CLARIO we developped a product line of recording measuring instruments combining the advantages of the well-known and established THIES-instruments with the requirements of clear design, environmental production, and a good price. CLARIO means precise results with the measurement of temperature, humidity and air pressure.

Relative Air Humidity

Thies - Psychro-Transmitters

Measuring instrument to determine the air humidity values based on the dry and moist temperature An attached water container provides for the moistening of the psychro sensor. The doublewalled protection tubes protect the sensor from radiation. A hanger, included in delivery, serves for the lateral mounting of the psychro-transmitter at a facade, wall etc.

Thies - Sling Psychrometer

Simple, sturdy measuring instrument. The air ventilation required is attained by rotary centrifugal movement. The instrument is supplied with the required moistening device along with a psychrometric table.

Temperature Measuring Technology - Electrical Temperature Sensors

Thies - Particulate-Hygro-Thermo-Baro Sensor Compact

The sensors are primarily intended for use in distributed fine dust measurement outdoors. For example, the fine dust distribution in a district can be recorded using several hygro-thermo-baro sensors. Thanks to its universal interface, the sensor can also be used as an individual solution in any suitable application. The interface to the device is digital and consists of an RS485 interface in half duplex mode. In conjunction with ID-based communication the interface enables operation of the sensors in a bus system.

Thies - Hygro-Thermo-Baro Transmitter Compact

This sensor is above all intended for use at meteorological measuring stations for connection to data logger systems. Thanks to its universal interface the sensor can also be used as a single solution in every application suitable for the purpose. The interface to the device is digital and consists of an RS485 interface in half duplex mode. In conjunction with ID-based communication the interface enables operation of the sensors in a bus system.

Wind - Ultrasonic Anemometer 1D, 2D, 3D

Thies Clima - 1D Ultrasonic Anemometer

The Ultrasonic Anemometer 1D serves for the measurement of the horizontal air flow of a fixed flow direction and the acoustic-virtual temperature. The device has 5 m fix cable.

Thies Clima - 1D Ultrasonic Anemometer

The Ultrasonic Anemometer 1D serves for the measurement of the horizontal air flow of a fixed flow direction and the acoustic-virtual temperature. The device has a 8-pol. plug connector.

Thies Clima - 1D Ultrasonic Anemometer

The Ultrasonic Anemometer 1D serves for the measurement of the horizontal air flow of a fixed flow direction and the acoustic-virtual temperature. The device has a 8-pol. plug connector and is mounted on a mast tube.