Advanced Pneumatic Industries S.r.l. (A.P.I.) products

Series of cylinders conforming to ISO 6432 standards The heads are connected with the body through rolling; this guarantees perfect tightening. The cushionings are in nitrile rubber to cushion the impact of the piston. The standard cylinders are provided with head and rod nut. One or more magnetic reed switches can be applied to the magnetic type.

Series of cylinders conforming to ISO 6432 standards. The heads are connected with the body through rolling; this guarantees perfect tightening. The cushionings are in nitrile rubber to relieve the impact of the piston; the MDMA type is provided with adjustable air cushioning at both ends. The standard cylinders are provided with head and rod nut. One or more magnetic reed switches can be applied to the  magnetic type.

New series of cylinders conforming to ISO 15552 standards. These can be supplied with two different shapes of the barrel: AMA type with "T" and "C" grooves allowing to use the flush-mounted magnetic switch and the AMTtype round with tie-rods. Two different shapes of switches can be applied on opposite sides of AMA tube, to interchange with most competitors. The main features of this cylinder are the "clean" modern design and the attention to details.

Series of spool valves, conforming to ISO 5599/1 standards for the mounting only on sub-base, with CNOMO pilot. Coils and connectors are to be ordered separately.

Series of spool valves, conforming to ISO 5599/1 standards for the  mounting only on sub-base, with IN LINE pilot. Coils and connectors are to be ordered separatel.

Series of spool valves, conforming to ISO 5599/1 standards for the mounting only on sub-base. For the sub-bases type SBA2...

Series of single and manifold sub-bases for valves ISO5599/1  size 2.

Size: 1/4”. Type: A14FRRL, A14FRR, A14F A14R, A14L.

Size: 3/8”. Type: A38FRRL, A38FRR, A38F, A38R, A38L.

Microregulators 1/8” and 1/4”. Type: AC400, AC700. Series of microregulators, standard with relieving valve. Used to reduce and keep constant the out pressure. Standard without gauge. For gauges see page 3.50.1. For mounting bracket see page 3.5.4 .(SR700-400).