Agratechniek b.v products

Drying of seed per drum individually is possible. The seed in a drum will automatically being dried to the desired equilibrium moisture content.

When the seeds are too dry during harvest, they are too delicate and will give less profit. An option is to increase the moisture content of the seeds. It is important that this is carried out correctly. Ensure the supplied moisture is absorbed well by the seeds, and the desired moisture content can be controlled. The simplest humidification method is to press air, in the form of very fine mist, through the seeds using an (ultrasonic) humidifier. In this case the problem is that the water is not really absorbed by the air, but float through the air as drops of water. However small the drops might be. This is comparable to mist; you get wet because the drops of water fall down on you. This way, the seeds, mostly at the supply side, will also become wet on the outside. Only over time the seeds will absorb the moisture. This can be harmful for the seeds and leads to an irregular seed moisture content.

The use of boxes and octabins has been common in the seed sector for decades. Emptying the trays can occur in many ways, but using special inverters with dosing bunkers is seen as the most effective, accurate and reliable. These inverters are made to your desires and for your application. Naturally customised to the dimensions of your boxes. Some of the possible applications can be found below.

The use of boxes and octabins has been common in the seed sector for decades. Emptying the trays can occur in many ways, but using special inverters with dosing bunkers is seen as the most effective, accurate and reliable. These inverters are made to your desires and for your application. Naturally customised to the dimensions of your boxes. Some of the possible applications can be found below.

The air drying process is an expensive business; this applies not only to condensation and adsorption dryers, but also to the hybrid dryers of energetic interest (combined condensation and adsorption drying). It is not economical to place an air dryer at every drying installation. Continuous drying does not take place at all installations, and dried air is not required constantly.