10 products found

Amerlab Scientific LLC Products

Amerlab - Model AC200 - Acid Ultra Cleaner

Clean labware is essential for trace metal analysis. Traditional cleaning procedures of glassware and other labware with nitric acid such as acid soaking and microwave cleaning can be time-consuming and yield less-than-ideal results. With Acid Ultra Cleaning, we are pleased to offer today's lab technician a better solution. Acid Ultra Cleaner, also known as Acid Steam Cleaning System or Trace Cleaning System, uses acid vapor to clean the microwave...
Amerlab - Model AP200 - Acid Purifier System

The purity of acid is substantially important in trace-element and ultra-trace element analysis. The higher the purity, the lower the background. Commercial high-purity acid is not only super expensive, but the purity drops after coming in contact with air. The acid purification process is the most economical method for high-purity acid production. Our Acid Purifier, known as Acid Purification System or Acid Distillation System, uses the...
Model KF100 - Water Oven

Sample cannot be completely dissolved (plastic particles, polyester, synthetic bone, etc.). Sample may have side reaction with KF Reagent (lubricating oil additives, the Sample containing aldehydes or ketones, etc.). Moisture in the sample is released slowly. Moisture in the sample is released only in high temperature condition. Sample contaminates the titration vessel (e.g., lubricating grease).
New Products
Amerlab - Model AC200 M - Fully Automated Controller

Suitable for small lab, 32 x AntonPaar100mL liners , 40 x CEM 55mL or 17 x CEM100mL liners.With full automation: Pre-cleaning, Acid vapor cleaning, Pure water cleaning and Hot air drying. One-Way Vapor (OWV) is an option.
Amerlab - Model AC200 M - Manual Controller

Suitable for small lab, 32 x AntonPaar 100mL liners, 40 x CEM 55mL or 18 x CEM 100mL liners. Add and remove acid manually. Only Acid vapor cleaning process. One-Way Vapor (OWV) is an option.
Amerlab - Model AC200 L - Fully Automated Controller
Amerlab - Model AC200 L - Manual Controller
Technology
Real Temperature Control (RTC) Technology

Visual Check & Manual Adjustment: Constant direct visual check is needed. Direct observation is not possible with the nontransparent PTFE. Frequent manual adjustment of heating power is required to avoid boiling. The efficiency is sacrificed at 5-20 mL/hr due to the limited heating power.
Sub-Boiling Distillation Technology

Sub-boiling distillation has been demonstrated to be the best method of acid purification and acid cleaning. It uses heaters to vaporize the liquid at a temperature typically 5-20...
Model PTC - Heater System

A PTC (Positive temperature coefficient of resistance) refers to materials that experience an increase in electrical resistance when their temperature is raised. Materials which have useful engineering applications usually show a relatively rapid increase with temperature, i.e. a higher coefficient. The higher the coefficient, the greater an increase in electrical resistance for a given temperature increase. A PTC material can be designed to reach a...

Contact supplier

Loading... Drop file here or browse Great, file uploaded. Change File Drop file here or browse

Yes, please send to similar suppliers.