Analog Devices, Inc. (ADI) products

The TMC2300 low voltage stepper motor driver is intended for battery-operated, space and standby-power critical driver applications. Its silent drive technology StealthChop™ enables non-bugging motion control for portable, home and office applications. A highly efficient power stage, boosted by an internal charge pump for best in-class RDSon resistance, provides high motor current from a tiny package even at low supply voltages. With this, dual AA batteries can be drained down to typically 2.0V (voltage must not drop below 1.8V, provide sufficient supply buffer capacitors).

The AD74115 is a versatile single-channel, software-configurable input and output device tailored for industrial control applications. It features multiple functionalities integrated into one chip, including analog output, analog input, digital output, digital input, resistance temperature detector (RTD), and thermocouple measurement capabilities. Communication is handled via a Serial Peripheral Interface (SPI), with digital inputs and outputs accessible through either SPI or GPIO pins to support higher speed data rates. The device boasts a 16-bit sigma-delta ADC and a 14-bit DAC, with a highly accurate 2.5V on-chip reference that serves both DAC and ADC. When paired with the ADP1034 power management unit, the AD74115 offers programmable power control on the positive analog supply (AVDD), optimizing power solutions for end applications. It also includes an on-chip charge pump for unipolar operations, enhancing its adaptability for various industrial control scenarios. The AD74115 is the go-to solution for engineers looking for integrated, high-precision control systems.

The TMCM-3110 is a triple axis stepper motor controller/driver module for sensorless load dependent current control. The device is powered by Trinamic StallGuard2™, CoolStep™ and SpreadCycle™ technology and has a trapezoidal ramp generator. The TMCM-3110 is capable of driving up to 4A of current from each output (with proper heatsinking). It is designed for an operating voltage of 9...52V. The device provides a RS485, CAN, USB and 3 encoder interfaces. An integrated protocol processor supplies a high level TMCL/ CANopen communication. All you need to get started is a power supply and Trinamic`s free and easy to use TMCL-IDE. This graphical user interface allows quick setup and supports the use of commands in direct mode, monitors real-time behavior visualized in graphs, and logs and stores data.

The TMCM-3212 is a triple axis stepper motor controller/driver module for sensorless load dependent current control. The device is powered by Trinamic StallGuard2™, CoolStep™, SpreadCycle™, StealthChop™ and DcStep™ technology and has a SixPoint™ ramp generator. The TMCM-3212 is capable of driving up to 4.2A of current from each output (with proper heatsinking). It is designed for an operating voltage of 17...53V. The device provides a RS485, CAN, USB and 3 encoder interfaces. An integrated protocol processor supplies a high level TMCL/ CANopen communication. All you need to get started is a power supply and Trinamic`s free and easy to use TMCL-IDE. This graphical user interface allows quick setup and supports the use of commands in direct mode, monitors real-time behavior visualized in graphs, and logs and stores data.

The MAX4364 is a high-performance, ultra-small audio power amplifier specifically designed for portable audio devices equipped with internal speakers. This amplifier delivers impressive output power, providing 1.4W from a 5V supply and 500mW from a 3V supply into an 8Ω load. Featuring a low total harmonic distortion plus noise (THD+N) of 0.04% at 1kHz and a high power supply rejection ratio (PSRR) of 68dB at 217Hz, the MAX4364 ensures superior audio clarity and minimal interference. Its efficient shutdown mode requires only 10nA of supply current, promoting energy conservation. The device includes internal DC bias generation, clickless operation, short-circuit, and thermal-overload protection to increase reliability. It operates stably in unity-gain configuration with gain set via two external resistors, making it versatile for various applications. Encased in an 8-pin SO package, the MAX4364's sleek design reduces external component count by eliminating the need for output-coupling capacitors.

Analog Devices offers ultralow jitter clock distribution products that fan out given signals for wireless infrastructure, instrumentation, broadband, ATE, and other applications demanding subpicosecond performance. Our clock products are ideal for clocking high performance analog-to-digital converters (ADCs) and digital-to-analog converters (DACs). ADI clock ICs integrate PLL cores, dividers, phase offset, skew adjust, and clock drivers in small chip scale packages.