ANTICOR Sp. z o.o. products

The ANTICOR company has introduced a new anti-corrosion protection for steel pipelines "ANTICORRay WSS60 System" installed under and above the ground, meeting the EN 12068 standard (DIN 30 672-2000), in class C HT60 (high temperature).

ANTICOR Seal 511 - Permanently plastic, sealing mass with high adhesion to concrete, ceramic, plastics and metal surfaces, etc. Used for sealing and filling external and underground electrical cableboxes and cables in protection pipes, etc. Free of components hazardous to human health and natural environment – which confirms the certificate – see downloads. APPLICATION: - Sealing and filling external and underground electrical cable boxes and cables in protection pipes, etc., - Sealing and filling around cable conduits and pipe passes through walls, - Sealing and corrosion protection.

A four-ply laminate, made with 2 layers of aluminium foil (core & outer layers) and 2 layers of polyester film, coated with a special cold weather acrylic pressure sensitive adhesive system which combines superior quick stick. at normal temperatures with superior low temperature performance below freezing. The construction of this specialty laminate makes it highly puncture and tear resistant as well as flame retardant. Water Vapor Permeability of zero perm. This tape is primarily used as a facing for insulation. It is also used as a low temperature vapour barrier joint closure system. Min. applying temperature: -30 to 100 degrees (C).

The Bristle Blaster Industrial Pneumatic is an IN-LINE drive unit which is distinguished by patented innovations (the patented air cooling system increases the service life of the flexible Bristle Blaster belts, the patented Accelerator bar is the basis for achieving roughnesses on steel or stainless steel and other materials (40- 120 µm) as well as surface cleaniness according to DIN EN ISO 8501-1 SA 2.5 / SA 3, as are also achieved for conventional blasting.) The special designed gear reduction increases the torque at 2,300 rpm. The low operating speed of 2,300 rpm and the light construction (1.2 kg) ensure a high degree work safety and easy, flexible handling. The IN-LINE design of the Bristle Blaster Industrial Pneumatic allows the highest possible efficient operation in difficult to reach areas and in places where blasting is not possible, is not allowed or is not economical.

System ANTICOR Plast in class A30 according to EN 12068 standard. Holds the certificate of the DVGW Institute and the attestation of the National Institute of Hygiene. Class A means low mechanical strength, while class 30 means continuous working temperature up to 30°C.

Cold applied bitumen monotape-system according to EN 12068 standard, modified by elastomeric. Class C means high mechanical strength, while class 30 means continuous working temperature up to 30°C.

Cold applied PE monotape-system according to EN 12068 standard. Class C means high mechanical strength, while class 50 means continuous working temperature up to 50°C.