119 products found

products

  • Dri-Prime Centrifugal Pumps

    The advantage of fully automatic, self-priming pumps means these units are always ready to perform, from dry applications up to 28’ of suction lift. These pumps are designed with flexibility in mind and excel in projects involving raw sewage, slurries while also managing solids with exceptional results. The Prime-Guard Controller can be configured for use with floats, a level transducer or pressure transducer.

  • Dri-Prime - Model CD75MA5 - Automatic Centrifugal Pump

    Dri-Prime - Model CD75MA5 - Automatic Centrifugal Pump

    The Godwin Dri-Prime 2'/3' (50mm/75mm) CD75MA5 automatic priming centrifugal pump is the diesel equivalent of the gasoline-powered pump found on small dewatering jobs. Able to prime to 28 feet (8.5M) of suction lift from dry, the CD75MA5 also features indefinite dryrunning capabilities due to the unique Godwin oil bath mechanical seal design. The model CD75MA5 offers flowrates to 370 gallons per minute (23 l/sec.), heads to 110 feet (33.5M), and...

  • Dri-Prime - Model CD80M - Automatic Centrifugal Pump

    Dri-Prime - Model CD80M - Automatic Centrifugal Pump

    The Godwin Dri-Prime 3' (75mm) CD80M automatic priming centrifugal pump is a compact and highly maneuverable portable pumping system that can deliver a maximum of 450 gallons per minute (28.4 l/se.c) and total dynamic heads to 93 feet (28.3M). The CD80M comes standard mounted on a highway trailer or skid mounted, and both include an integral 30 gallon (113.5 liter) fuel tank for overnight running capabilities. A recessed impeller model is also...

  • Dri-Prime - Model CD100M - Automatic Centrifugal Pump

    Dri-Prime - Model CD100M - Automatic Centrifugal Pump

    The Godwin Dri-Prime 4 inch (100mm) CD100M automatic priming centrifugal pump is a highly maneuverable portable trash pump with flow capabilities to 750 gallons per minute (47 liters per second), total dynamic heads to 115 feet (35 meters) and solids handling to 2 inch (50mm) in diameter. The unique Godwin venturi air evacuation system allows the CD100M to prime from dry conditions with suction lifts up to 28 feet (8.5 meters). Perfect in intermittent...

  • Dri-Prime - Model CD103M - Automatic Centrifugal Pump

    Dri-Prime - Model CD103M - Automatic Centrifugal Pump

    The Godwin Dri-Prime 4 inch (100mm) CD103M automatic priming centrifugal pump is a highly maneuverable portable trash pump with flow capabilities to 1,000 gallons per minute (833 Imperial GPM), total dynamic heads to 170 feet (52 meters) and solids handling to 3 inch (75mm) in diameter. The unique Godwin venturi air evacuation system allows the CD103M to prime from dry conditions with suction lifts up to 28 feet (8.5 meters). Perfect in intermittent...

  • Dri-Prime - Model CD150M - Automatic Centrifugal Pump

    Dri-Prime - Model CD150M - Automatic Centrifugal Pump

    The Godwin Dri-Prime 6' (150mm) CD150M automatic priming centrifugal pump is clearly the backbone of the temporary portable pumping industry. With solids-handling to 3' (75mm) in diameter, maximum flows of 1700 gallons per minute (107.3 l/sec.) and 160 feet (48.8M) of total dynamic head, and indefinite dry-running capabilities, the CD150M can be found in a wide variety of applications from straight dewatering to sewage bypassing. Mounted on a highway...

  • Dri-Prime - Model CD160M - Compact Pump

    Dri-Prime - Model CD160M - Compact Pump

    The Godwin Dri-Prime 6' (150 mm) CD160M pump is an extremely powerful yet compact pump with flow capabilities to 1900 GPM (431 m3/h) and discharge heads to 260' (79.2 m). In addition, the CD160M features the unique Godwin high pressure oil bath mechanical seal design that allows for totally dry running for indefinite periods of time while automatically priming and repriming. Able to perform in the toughest conditions, the CD160M can pass a solid to 3'...

  • Dri-Prime - Model CD200M - Automatic Centrifugal Pump

    Dri-Prime - Model CD200M - Automatic Centrifugal Pump

    The Godwin Dri-Prime 8' (200mm) CD200M automatic priming centrifugal pump is clearly a standard for the temporary portable pumping industry. With solids-handling to 3' (75mm), maximum flows of 2300 gpm (145 l/sec.) and 170' (51.8M) of total dynamic head, and indefinite dry-running capabilities, the CD200M can be found in a wide variety of applications from straight dewatering to sewage bypassing. Mounted on a highway trailer, the CD200M is both...

  • Dri-Prime - Model CD225M - Rugged Centrifugal Pump

    Dri-Prime - Model CD225M - Rugged Centrifugal Pump

    The 8' (200mm) CD225M Dri-Prime is an extremely rugged pump, capable of flow rates to 3200 gpm (726.4 M3/hr.), total dynamic heads to 180 feet (54.9M), and solids handling capabilities up to 3-1/8' (75mm) in diameter. The CD225M also features the unique Godwin high pressure oil bath mechanical seal that allows for indefinite dry running, perfect for intermittent flow applications. All of these features come standard on a highly maneuverable highway...

  • Dri-Prime - Model CD250M - Rugged Centrifugal Pump

    Dri-Prime - Model CD250M - Rugged Centrifugal Pump

    An extremely rugged pump, the 10' (250mm) CD250M Dri-Prime pump is capable of flow rates to 3600 gpm (227 l/sec.), total dynamic heads to 180' (54.9 meters), and solids handling capabilities up to 3-1/8' (79mm) in diameter. The CD250M also features the unique Godwin high pressure oil bath mechanical seal that allows for indefinite dry running, perfect for intermittent flow applications. All of these features come standard on a highly maneuverable...

  • Dri-Prime - Model CD300M - Centrifugal Trash Pump

    Dri-Prime - Model CD300M - Centrifugal Trash Pump

    The Godwin CD300M Dri-Prime pump is a 12 inch (300mm) centrifugal trash pump perfect for your biggest jobs. Offering flows to 6,000 gallons per minute (380 liters per second), discharge heads to 200 feet (60M), and solids handling to 3-3/4' (95mm) in diameter, the CD300M moves large volumes of water and provides automatic self-priming to 28 feet (8.5M). For intermittent flows, the double high pressure mechanical seal means the CD300M can run dry...

  • Dri-Prime - Model DPC300 - Automatic Centrifugal Pump

    Dri-Prime - Model DPC300 - Automatic Centrifugal Pump

    The Godwin DPC300 automatic Dri-Prime 12' (300mm) centrifugal pump has gained recognition as the industry leader in high volume bypass pumping over the last fifteen years. With flows to 5,000 gallons per minute (315.5 l/sec.) and solids handling to 3-1/2' (89mm) in diameter, the DPC300 moves large volumes of water while providing the ease of automatic priming to 28 feet (8.5M). The convenience of a low profile discharge flange makes pipe connections...

  • Dri-Prime - Model CD400M - Centrifugal Trash Pump

    Dri-Prime - Model CD400M - Centrifugal Trash Pump

    Godwin’s CD400M Dri-Prime is an 18' x 16' (450mm x 400mm) centrifugal trash pump perfect for your biggest jobs. Offering flows to 10,000 gallons per minute (631 l/sec.), discharge heads to 150' (46M), and solids handling to 5' (125mm) in diameter, the CD400M moves large volumes of water and provides the ease of automatic priming to 28 feet (8.5M). For intermittent flows, the double high pressure mechanical seal means the CD400M can run dry...

  • High Head & Jetting / HL Series Pumps

    AQUATECH’s High Head and Jetting HL series pumps are prime choice for those applications that require high pressure and high volume demands, such as quarry pumps or temporary fire pumps. With both diesel and electrically driven models available, AQUATECH carries options that range from 3” (80mm) to 10” (250mm) outlets with flows from 200 US gal/min to 4000 US gal/min. These are fully automatic, self-priming units that use the PrimeGuard feature, which allows for specific press

  • Dri-Prime - Model HL80M - Centrifugal Pump

    Dri-Prime - Model HL80M - Centrifugal Pump

    The HL80M Dri-Prime 4' x 3' (100mm x 75mm) centrifugal pump is unique in the portable pumping industry. It’s like having two pumps in one. High pressure discharge capabilities to 150 psi (10.3 BAR) make the HL80M perfect for closed system pumping, water main testing, and wellpoint jetting. The HL80M also can be used as a typical open trench solids handling trash pump with no changing of parts. Constructed of hardened alloys for long life in...

  • Dri-Prime - Model HL4M - Automatic Self-Priming Centrifugal Pump

    Dri-Prime - Model HL4M - Automatic Self-Priming Centrifugal Pump

    The Godwin Dri-Prime 4' x 4' (100mm x 100mm) HL4M automatic self-priming centrifugal pump is a compact, high pressure pump perfectly suited for temporary pumping under discharge pressure conditions or high discharge lifts. Capable of generating maximum flows of 1,000 gallons per minute (63.1 l/sec.) and discharge heads to 455 feet (138.7M) or 195 psi (13.4 BAR), the HL4M is used in temporary fire service, quarry and mine dewatering, and as a temporary...

  • Dri-Prime - Model HL5MS - Automatic Self-Priming Centrifugal Pump

    Dri-Prime - Model HL5MS - Automatic Self-Priming Centrifugal Pump

    The Godwin Dri-Prime 6' x 4' (150mm x 100mm) HL5MS automatic priming centrifugal pump is a compact, high pressure pump perfectly suited for temporary pumping under discharge pressure conditions or high discharge lifts. Capable of generating maximum flows of 1000 gallons per minute (63 l/sec.) and discharge heads to 455 feet (138.7M) or 195 psi (13.4 BAR), the HL5MS is used in temporary fire service, quarry and mine dewatering, and as a temporary...

  • Dri-Prime - Model HL5M - Automatic Self-Priming Centrifugal Pump

    Dri-Prime - Model HL5M - Automatic Self-Priming Centrifugal Pump

    The HL5M automatic Godwin Dri-Prime 6' x 6' (150mm x 150mm) centrifugal pump is an extremely powerful yet compact high pressure pump with flow capabilities to 1450 gallons per minute (91.5 l/sec.) and discharge heads to 500 feet (152.4 M). In addition, the HL5M features the unique Godwin high pressure oil bath mechanical seal design that allows for totally dry running for indefinite periods of time while automatically priming and repriming. Able to...

  • Dri-Prime - Model HL6M - Automatic Self-Priming Centrifugal Pump

    Dri-Prime - Model HL6M - Automatic Self-Priming Centrifugal Pump

    The Godwin Dri-Prime 8' x 6' (200mm x 150mm) HL6M automatic priming centrifugal pump is a high pressure discharge pump with maximum flows of 2300 gallons per minute (145 l/sec.) and discharge heads to 320 feet (97.5M) or 135 psi (9.3 BAR). At home in a wide variety of applications, the HL6M has been used in temporary fire service, quarry and mine dewatering, and as a temporary replacement for permanently installed transfer pumps. Like all Godwin...

  • Dri-Prime - Model HL110M - Automatic Self-Priming Pump

    Dri-Prime - Model HL110M - Automatic Self-Priming Pump

    The Godwin Dri-Prime 4' x 3' (100 mm x 80 mm) HL110M pump is a heavy-duty, fully automatic selfpriming pump specifically offered for pumping under extreme high pressure discharge conditions or high discharge lift applications. The HL110M offers flow rates up to 500 GPM (115 m3/h), total dynamic heads up to 615' (185 m) and solids handling up to 0.787' (20 mm) in diameter. Like all Godwin pumps, the HL110M pump includes the Dri-Prime air ejector...

  • Dri-Prime - Model HL130M - Automatic Self-Priming Pump

    Dri-Prime - Model HL130M - Automatic Self-Priming Pump

    The Godwin Dri-Prime 6' x 4' (150mm x 100mm) HL130M is a heavy duty, fully automatic self-priming pump specifically offered for pumping under discharge pressure conditions or high discharge lift applications. The HL130M offers flowrates up to 1,300 gpm (82 l/sec.), total dynamic heads up to 650 feet (198M), and solids handling up to 1-3/8' (35mm) in diameter. Like all Godwin pumps, the HL130M includes the Dri-Prime air ejector priming system for fully...

  • Dri-Prime - Model HL160M - Automatic Self-Priming Pump

    Dri-Prime - Model HL160M - Automatic Self-Priming Pump

    The Godwin Dri-Prime 8' x 6' (200mm x 150mm) HL160M is a heavy duty, fully automatic self-priming pump specifically offered for pumping under discharge pressure conditions or high discharge lift applications. The HL160M offers flowrates up to 2,000 gpm (126 l/sec.), total dynamic heads up to 600 feet (183M), and solids handling up to 1-3/8' (35mm) in diameter. Like all Godwin pumps, the HL160M includes the Dri-Prime air ejector priming system for...

  • Dri-Prime - Model HL225M - Automatic Self-Priming Pump

    Dri-Prime - Model HL225M - Automatic Self-Priming Pump

    The Godwin Dri-Prime 10' x 8' (250mm x 200mm) HL225M is a heavy duty, fully automatic self-priming pump specifically offered for pumping under discharge pressure conditions or high discharge lift applications. The HL225M offers flowrates up to 3,600 gpm (227 l/sec.), total dynamic heads up to 380 feet (116M), and solids handling up to 3' (75mm) in diameter. Like all Godwin pumps, the HL225M includes the Dri-Prime air ejector priming system for fully...

  • Dri-Prime - Model HL250M - Automatic Self-Priming Pump

    Dri-Prime - Model HL250M - Automatic Self-Priming Pump

    The Godwin Dri-Prime 12' x 10' (300mm x 250mm) HL250M is a heavy duty, fully automatic self-priming pump specifically offered for pumping under discharge pressure conditions or high discharge lift applications. The HL250M offers flowrates up to 5,700 gpm (360 l/sec.), total dynamic heads up to 390 feet (118.9M), and solids handling up to 3' (75mm) in diameter. Like all Godwin pumps, the HL250M includes the Dri-Prime air ejector priming system for...

  • Dri-Prime - Model HL260M - Automatic Self-Priming Centrifugal Pump

    Dri-Prime - Model HL260M - Automatic Self-Priming Centrifugal Pump

    The Godwin Dri-Prime 10-inch x 8-inch (250 mm x 200 mm) HL260M automatic priming centrifugal pump is perfect for your biggest jobs. With solids-handling to 2' (50 mm) in diameter, maximum flows of 4,760 GPM(1,081 m3/h) and 500' (150 m) of total dynamic head, and indefinite dry-running capabilities, the HL260M can be found in a wide variety of applications requiring high volume and high head.

  • Electric Submersibles Pumps

    Electric submersible pumps come in a variety of models with specific limitations. Electric submersibles come with the pump configured to single or three phase and with manual or automatic panels. Most submersible pumps do not have variable frequency drives (VFD’s) which allows control of the RPM of the electric motor, so the RPM is fixed. The motor therefore runs at a specific RPM turning the impeller, which throws the fluid out with a consistent force during its run time. Consider the fo

  • Sub-Prime - Model GSP05/10/20 - Electric Submersible Dewatering Pumps

    Sub-Prime - Model GSP05/10/20 - Electric Submersible Dewatering Pumps

    The GSP Sub-Prime line is a selection of portable, electric submersible dewatering pumps available for a wide range of pumping applications on construction, industrial, mining, utility, and municipal job sites. Available in 0.5 hp / 0.4 kW (GSP05), 1 hp / 0.75 kW (GSP10), and 2 hp / 1.5 kW (GSP20) models, the GSP Sub-Prime offers flow rates from 70 through 110 gpm (4.4 through 6.9 l/sec) and maximum heads from 39 to 70 feet (11.9 to 21.3 meters)....

  • Sub-Prime - Model GSP25/GSP35 - Electric Submersible Dewatering Pumps

    Sub-Prime - Model GSP25/GSP35 - Electric Submersible Dewatering Pumps

    The line of Godwin Sub-Prime GSP electric submersible pumps is designed for large dewatering applications. The GSP25 and GSP35 models are capable of maximum flow rates from 254 to 301 gpm (57.7 to 68.3 M3/hr.) and discharge heads to 61 feet (18.3M). Like the small dewatering and trash handling models in the Sub-Prime line, these large dewatering submersible pumps are suited to tough construction, mining and industrial applications. They feature a...

  • Sub-Prime - Model GSP45/GSP60 - Electric Submersible Dewatering Pumps

    Sub-Prime - Model GSP45/GSP60 - Electric Submersible Dewatering Pumps

    The line of Godwin Sub-Prime GSP electric submersible pumps is designed for large dewatering applications requiring high head or high volume. The GSP45 and GSP60 models are capable of maximum flow rates from 250 to 550 gpm (15.8 to 34.7 l/sec) and maximum discharge heads from 66 to 150 feet (20.1 to 45.7M). Like the small dewatering and trash handling models in the Sub-Prime line, these large dewatering submersible pumps are suited to tough...

  • Sub-Prime - Model GSP55/GSP80/GSP130 - Electric Submersible Dewatering Pumps

    Sub-Prime - Model GSP55/GSP80/GSP130 - Electric Submersible Dewatering Pumps

    The line of Godwin Sub-Prime GSP electric submersible pumps is designed for large dewatering applications requiring high head or high volume. The GSP55, GSP80 and GSP130 models are capable of maximum flow rates from 250 to 900 gpm (15.8 to 56.8 l/sec.) and maximum discharge heads from 75 to 262 feet (23 to 80M). Like the small dewatering and trash handling models in the Sub-Prime line, these large dewatering submersible pumps are suited to tough...

  • Sub-Prime - Model GSP160/GSP300 - Electric Submersible Dewatering Pumps

    Sub-Prime - Model GSP160/GSP300 - Electric Submersible Dewatering Pumps

    The line of Godwin Sub-Prime GSP electric submersible pumps is designed for large dewatering applications requiring high head or high volume. The GSP160 and GSP300 models are capable of maximum flow rates from 330 to 1,650 gpm (74.9 to 364.6 M3/hr.) and maximum discharge heads from 115 to 243 feet (35.1 to 74M). Like the small dewatering and trash handling models in the Sub-Prime line, these large dewatering submersible pumps are suited to tough...

  • Sub-Prime - Model GSP600 - Electric Submersible Dewatering Pumps

    Sub-Prime - Model GSP600 - Electric Submersible Dewatering Pumps

    The line of Godwin Sub-Prime GSP electric submersible pumps is designed for large dewatering applications requiring high head or high volume. Specifically, the GSP600 is capable of flow rates to 3,650 gpm (230 l/sec.) and discharge heads to 338 feet (103M). Like the small dewatering and trash handling models in the Sub-Prime line, these large dewatering submersible pumps are suited to tough construction, mining and industrial applications. They...

  • Sub-Prime - Model GST05/10 - Electric Submersible Trash Pumps

    Sub-Prime - Model GST05/10 - Electric Submersible Trash Pumps

    The GST Sub-Prime line is a selection of portable, electric submersible pumps designed for trash laden applications. Standard side discharge and semi-vortex cast iron impeller enable these units to handle up to 1' (25mm) diameter solids. And the fully removable volute makes clean-out fast and easy. The GST Sub-Prime line offers flow rates to 75 gpm (4.75 l/sec) and maximum heads to 48 feet (14.6 meters). Units are available in 0.5 hp / 0.4 kW (GST05)...

  • Sub-Prime - Model GSL30/GSL35 - Electric Submersible Sludge Pumps

    Sub-Prime - Model GSL30/GSL35 - Electric Submersible Sludge Pumps

    The line of Godwin Sub-Prime GSL electric submersible pumps is designed for large sludge or dewatering applications. The GSL30 and GSL35 models are capable of maximum flow rates from 205 to 220 gpm (12.9 to 13.9 l/sec) and discharge heads to 59 feet (18M). Like the dewatering models in the Sub-Prime line, these submersible sludge pumps are suited to tough construction, mining and industrial applications. The design features a side discharge that...

  • Sub-Prime - Model GSL60/GSL80 - Electric Submersible Sludge Pumps

    Sub-Prime - Model GSL60/GSL80 - Electric Submersible Sludge Pumps

    The line of Godwin Sub-Prime GSL electric submersible pumps is designed for large sludge or dewatering applications. The GSL60 model is capable of maximum flow rates from 240 gpm (15.1 l/sec) and discharge heads to 85 feet (25.9M). The GSL80 model is capable of maximum flow rates from 84 to 490 gpm (5.3 to 30.9 l/sec) and discharge heads to 154 feet (47M). Like the dewatering models in the Sub-Prime line, these submersible sludge pumps are suited to...

  • Vacuum Assisted Wellpoint Pumps

    AQUATECH specializes in the supply of vacuum wellpoint dewatering equipment and related turn-key services. Our vacuum assisted wellpoint pumps and dewatering systems are available on an equipment rental and sale basis, and are recognized for their reliability and energy/environmental efficiencies.

  • Model CD225MV - Portable Wellpoint System

    Model CD225MV - Portable Wellpoint System

    The CD225MV is a portable wellpoint system designed for a wide range of on-site dewatering applications. The CD225MV offers flow rates up to 3100 gpm (196 l/sec.), total heads to 180 feet (54.9M), and can handle solids up to 3-1/8' (79mm) in diameter. Based on the popular, industry-standard CD225M Dri-Prime Pump, the CD225MV offers convenient automatic self priming and indefinite dry running capabilities that contractors, municipalities, industry and...

  • Model CD150MV - Portable Wellpoint System

    Model CD150MV - Portable Wellpoint System

    The CD150MV is a portable wellpoint system designed for a wide range of on-site dewatering applications. The CD150MV offers flow rates up to 1960 gpm (123.7 l/sec.), total heads to 140 feet (42.7M), and solids handling up to 3' (75mm) in diameter. Based on the popular, industry-standard CD150M Dri-Prime Pump, the CD150MV offers convenient automatic self priming and indefinite dry running capabilities that contractors, municipalities, industry and...

  • Dri-Prime - Model CD100MV - Portable Wellpoint Pump

    Dri-Prime - Model CD100MV - Portable Wellpoint Pump

    The CD100MV is a portable wellpoint pump designed for a wide range of on-site dewatering applications. Based on the popular, industry-standard CD100M Dri-Prime® Pump, the CD100MV offers flow capabilities to 750 gallons per minute (47 liters per second), total dynamic heads to 115 feet (35 meters) and solids handling to 2 inch (50mm) in diameter along with convenient automatic self-priming and indefinite dry running capabilities. the CD100MV...

  • Temporary High Pressure Fire Pumps

    Temporary High Pressure Fire Pumps

    Godwin’s line of high pressure fire pumps are the perfect solution for temporary, standby fire equipment pumping needs. Fully packaged systems from hose reel to hydrant applications satifsfy even the most sophisticated requirements. Our comprehensive range of Dri-Prime pumps handle flows up to 5,000 GPM (1140 m3/hr.) and pressures to 265 PSI (18 BAR). Materials of construction are specified to suit either fresh water or salt water. To ensure...

  • Dredging Pumps

    When addressing the full scope of dredging operations Aquatech is prepared to manage the most demanding of jobs. We’re equipped with a range of hydraulically-powered pumps and feature industry-leading Dragflow dredging equipment, whose pumps are designed to operate in a variety of applications, from shallow seas to fresh water locations, as well as deep water jobs. The distinctive dredging cutter design of the equipment yields superior results and is able to reach an exceptional solid con

  • Model HY50 A/B - Hydraulic Pumps

    Model HY50 A/B - Hydraulic Pumps

    Main Body: spheroidal cast iron GS500. Motor Housing: cast iron G25. Wearing parts: high chrom. Main Shaft: austempering NiCrMo4 Steel.

  • Model HY50 HC - Hydraulic Pump

    Model HY50 HC - Hydraulic Pump

    Materials: Main Body: spheroidal cast iron GS500. Motor Housing: cast iron G25. Wearing parts: high chrom. Main Shaft: austempering NiCrMo4 Steel.

  • Model HY50-108 A/B - Hydraulic Pumps

    Model HY50-108 A/B - Hydraulic Pumps

    Materials: Main body: spheroidal cast iron GS500. Motor housing: cast iron GS5. Wearing parts: high chrom. Main shaft: austempering NiCrMo4 Steel.

  • Model HY85 HC - Hydraulic Pumps

    Model HY85 HC - Hydraulic Pumps

    Materials: Main Body: spheroidal cast iron GS500. Motor Housing: cast iron G25. Wearing parts: high chrom. Main Shaft: austempering NiCrMo4 Steel.

  • Model HY85/160 HC - Hydraulic Pumps

    Model HY85/160 HC - Hydraulic Pumps

    Materials: Main body: spheroidal cast iron GS500. Motor housing: cast iron GS5. Wearing parts: high chrom. Main shaft: austempering NiCrMo4 Steel.

  • Model EXHY20 - Submersible Dredging Cutter

    Model EXHY20 - Submersible Dredging Cutter

    Hydraulic excavators are designed to let the pump works also in presence of very compact material. Cutters are able to increase solid production and permit to complete the dredging activities even in the most difficoult situations.

  • Model EXHY35 - Submersible Dredging Cutter

    Model EXHY35 - Submersible Dredging Cutter

    Hydraulic excavators are designed to let the pump works also in presence of very compact material. Cutters are able to increase solid production and permit to complete the dredging activities even in the most difficoult situations.

  • Wet-Prime Gas Pumps

    Wet-Prime Gas Pumps

    The Godwin Wet-Primes are portable, gasoline-powered pumps available in dewatering, trash, diaphragm, plastic and pressure models with both Honda® and Subaru Robin® engines. Godwin Wet-Prime pumps are capable of maximum heads to 285' and maximum flows to 425 GPM. Ideal for applications that involve construction dewatering, landscaping and irrigation, farming, remote firefighting and marine construction, the Wet-Prime line is backed by the same...

  • Sound Attenuated

    When the job calls for minimal noise in areas such as residential zones, hospitals or commercial areas, it’s critical to have access to the proper sound attenuated equipment. Aquatech provides a number of options depending on the project specifications.

  • Dri-Prime - Whisper-Pac

    Dri-Prime - Whisper-Pac

    The Whisper-Pac enclosure for Dri-Prime pumps minimizes and reduces sound generated by diesel driven units and is offered for applications where noise levels are a priority. Typically, the Whisper-Pac enclosure can reduce operating noise to as low as 63 dBA at 30 feet (9M). These freestanding enclosures consist of a structural steel frame with 4' thick panels faced with 18 gauge sheet metal (exterior) and 22 gauge perforated, galvanized sheet metal....

  • Dri-Prime - Quiet Vandal-Pac

    Dri-Prime - Quiet Vandal-Pac

    The Quiet Vandal-Pac enclosure is the right choice. The Quiet Vandal-Pac houses the Godwin Dri-Prime pump in a specially designed enclosure that mounts directly to the trailer and allows pumping to continue while at the same time providing equipment protection and keeping engine and other noise to a minimum. The Quiet Vandal-Pac option is available for any Godwin pump model that can be mounted on a 30, 60 or 100 gallon (114, 227 or 379 liter) trailer....

  • Pipes Hose And Fittings

    Pipes Hose And Fittings

    AQUATECH provides a wide range of accessories to support pumping systems. We offer a variety of hose, pipes, fittings and manifolds to cater to header, suction and discharge pumping systems requirements, as well as automated pump controls, variable frequency devices, alarm systems and flow meters.

Products by HÜDIG GmbH & Co KG

  • Dewatering-Submersible Drainage Pumps

  • Minex  - Model 50 Hz - Submersible Drainage Pumps

    Minex - Model 50 Hz - Submersible Drainage Pumps

    Absolutely safe of dry-running damages by the air valve system, control-system of phase, voltage and rotating direction are standard features. A temperature sensor protects against overheating. A remarkable high wear resistance is achieved by the use of polyurethane-coatings, which assure a three-time longer life-time than the use of ordinary rubber diffuser. 

  • Minette Inox  - Model 50 Hz - Submersible Drainage Pumps

    Minette Inox - Model 50 Hz - Submersible Drainage Pumps

    INOX stands for a complete new range of electrical sewage- and slurry-pumps made out of acid-resistant stainless steel. These pumps are engineered for applications which would destroy submersible pumps made out of aluminium within weeks perhaps in days. INOX-pumps are designed for challenging environmental conditions with corrosive water or corrosive slurry how to find in the mining-industry, in power-stations and in other sectors. This range of pumps...

  • Dewatering- Submersible Sludge Pumps

  • Salvador - Submersible Sludge Pumps

    Salvador - Submersible Sludge Pumps

    With the market launch of the new submersible sludge pump range in April 2008 GRINDEX was the trend-setter for the application of modern sludge pumps. The GRINDEX-engineers have chosen a very high aim in the developing of the new range of sludge pumps. Beside the usual configuration of GRINDEX – pumps (air-valve, SMART-motor-protection-system, built-in star-delta-starter in the pump-head of the bigger sizes), the engineers set a great importance...

  • Ecoline - Solid Submersible Sludge Pumps

    Ecoline - Solid Submersible Sludge Pumps

    With the further development of the TOPLINE-range GRINDEX shows again that they are capable to match the pump-design to the needs of the users. The “new small” GRINDEX is called SOLID and is the start of the technical changes in the small sized range. The users are getting together with the SOLID high operational safety due to the protection against dry running. It is the only pump available on the market in this capacity-range equipped...

  • Dewatering- Heavy Duty Slurry Pumps

  • HÜDIG - Model GR-3-2 - Heavy Duty Slurry Pumps

    HÜDIG - Model GR-3-2 - Heavy Duty Slurry Pumps

    These compact-designed pumps are engineered for medium-heavy applications up to a water-depth of 30 m. By the principle of the cutter-system sedimentary material will be raised and a high ration of sediment load can be reached and charged. Extreme wear-resistance chrome-alloyed material (24 – 28 % Cr) makes the GR to a truly TOYO-Heavy Duty Slurry Pump.

  • Model DP-3 - Heavy Duty Slurry Pumps

    Model DP-3 - Heavy Duty Slurry Pumps

    These pumps are available in various metal compositions and on request with a thermo sensor integrated in the motor winding as well with a moisture sensor. Special versions allow applications in great depth and by high temperature.

  • Dewatering- Sewage Vacuum Units

  • Model EVA 180 - Sewage Vacuum Units

    Model EVA 180 - Sewage Vacuum Units

    Sewage Pumps are always subject of high demands.Domestic and industrial or similar sewage have to be reliable disposed. Ordinary waste water pumps or pumps with an open impeller are mostly not sufficient. Powered by electric- or diesel engine is available. Diesel Units can be delivered in a noise-reduced version.

  • Irrigation - Irrigation Pump Units

  • Model HC 910/376/14 - Electro Pump Unit

    Model HC 910/376/14 - Electro Pump Unit

    The unit with pump and motor is mounted on a galvanized skid. The manual pump which is necessary for the bleeding of the pump is installed at side on a mounting bracket. The control-panel is mounted at the front side allowing easy access to the switches.

Products by Dragflow S.r.l.

  • Electric Submersible Slurry Pumps

    Dragflow dredge pumps. Heavy Duty Slurry Pumps.

  • Model EL1204HH - High Head Submersible Heavy Duty Pump

    Model EL1204HH - High Head Submersible Heavy Duty Pump

    EL1204HH is a new revolutionary pump. It introduces the concept that also submersible agitator slurry pumps can have high head. With high head we mean up to 75m (246’). This value makes the EL1 EL1204HH the submersible heavy duty pump with the highest head in the world.

  • Model EL 110 A/B - Electric Pump

    Model EL 110 A/B - Electric Pump

    Main body: hardened material – spheroidal cast iron GS500. Wearing parts: high chrom. Motor housing: cast iron G25. Main shaft: austempering NiCrMo4 Steel.

  • Model EL 110 S A/B - Electric Pump

    Model EL 110 S A/B - Electric Pump

    Materials: Main body: hardened material – spheroidal cast iron GS500. Wearing parts: high chrom. Motor housing: cast iron G25. Main shaft: austempering NiCrMo4 Steel.

  • Model EL 180 A/B - Electric Pump

    Model EL 180 A/B - Electric Pump

    Materials: Main body: hardened material – spheroidal cast iron GS500. Wearing parts: high chrom. Motor housing: cast iron G25. Main shaft: austempering NiCrMo4 Steel.

  • Model EL 180 S A/B - Electric Pump

    Model EL 180 S A/B - Electric Pump

    Materials: Main body: hardened material – spheroidal cast iron GS500. Wearing parts: high chrom. Motor housing: cast iron G25. Main shaft: austempering NiCrMo4 Steel.

  • Model EL 200 A/B - Electric Pump

    Model EL 200 A/B - Electric Pump

    Materials: Main body: hardened material – spheroidal cast iron GS500. Wearing parts: high chrom. Motor housing: cast iron G25. Main shaft: austempering NiCrMo4 Steel.

  • Delivery Hoses & Floaters

  • Dragflow - Dredging Hoses

    Dragflow - Dredging Hoses

    The success of dredging operation depends on type and quality of delivery pipes and floaters that support the discharge line. Dragflow provides two different types pipes: Delivery flexible pipes: delivery flexible pipes, they are subjected to higher abrasion, but guarantee the most handling versatility during dredging operations. Delivery surface pipes: the delivery surface pipes transport the material to the discharge place. Dragflow offers both...

  • Dragflow - Dredging Hoses Floaters

    Dragflow - Dredging Hoses Floaters

    The success of dredging operation depends on type and quality of delivery pipes and floaters that support the discharge line. We supply floaters in two categories: Floaters for flexible pipe: these floaters have a particular structure that permit them to withstand the water pressure due to the depth of the work. Floaters for surface delivery pipe.

  • Hydraulic Slurry Pumps and Diesel/Electric Power Packs

    Dragflow Hydraulic Dredge Pumps line and Diesel/Electric Power Packs.

  • Dragflow - Model HY35 - HY85 - Hydraulic Submersible Dredging Pumps

    Dragflow - Model HY35 - HY85 - Hydraulic Submersible Dredging Pumps

    Dragflow Hydraulic Subersible Dredging Pumps. Characteristics: Pump provided of agitator to stir things up. High abrasion resistance -Wear parts in high chrome. Low rotation speed. Able to handle up to 70% per weight material density. Capacity: up to 1000 cubic meter per hour. Delivery distance: up to 1 km.

  • Hydraulic Excavators and Water Jet Ring

    Hydraulic cutters for Dragflow dredging pumps. Suitable also for deep-sea dredging, up to 100m.

  • Dragflow - High Pressure Water Jet Ring System

    Dragflow - High Pressure Water Jet Ring System

    High pressure water jet ring system can be used in presence of clay materials or with electric pumps, as an alternative or in addition to hydraulic cutters. This system consists of a ring, mounted on the pump filter and a centrifugal pump power of the same horizontal axis (available in electrical and hydraulic version). Jet ring is also available for sea and aggressive water.

  • Dragflow - Hydraulic Submersible Dredging Cutters

    Dragflow - Hydraulic Submersible Dredging Cutters

    Hydraulic excavators are designed to let the pump works also in presence of very compact material. Cutters are able to increase solid production and permit to complete the dredging activities even in the most difficoult situations.

  • Dredges

  • Dragflow - Model DRH Series - Dredges With Steel Cable

    Dragflow - Model DRH Series - Dredges With Steel Cable

    The dredge with steel cables, for being so user friendly, represents the best solution used in many touristic harbours, they find this machine as the best financial compromise between performance and initial investment. This dredge is built with technology that is suitable also for applications  where deep dredging is needed without restrictions of depth. This unit is completely modular, easy to transport and assemble. Dragflow DRH dredge has...

  • Dragflow - Model DRT Series - Dredges With Telescopic Boom

    Dragflow - Model DRT Series - Dredges With Telescopic Boom

    The dredge equipped with a telescopic boom guarantees precision and control. It can be used in operations in which the maintenance of a precise dredging depth is  predetermined. in combination with a powerful monitoring system, allows 'surgical' operations. Perfect examples could be a trade harbours where it is essential to remove a precise polluted layer of the sea floor that will be treated with draining systems. A normal dredging could involve...

  • Dragflow - Model DRS Series - Dredges With Ladder

    Dragflow - Model DRS Series - Dredges With Ladder

    A classic architecture of naval dredging equipment that combines certain advantages of using a submersible dredging equipment: more productivity and less cost. This solution is suitable to perform dredging operations on very compact land. the lifting of material is made by the combined action of the excavators, fixed to the pump at the end of the ladder, that disgregate the layers of sea floor.

  • Remote Controlled Mini Dredge

    Remote Controlled Mini Dredge

    Dragflow versatile electric dredge. Fully wireless remote controlled. Design to fit in 20' container - ready to use. Winches for moring an positioning. Safer because no humans are needed onto the barge. High solid content - up to 70% concentation by weight. Production up to 100 m3/h. Discharge distance up to 300m. Working depth up to 20m. Power from 5 to 18 HP. Possibility to integrate a GPS to keep...

  • Dragflow - Remote Controlled Mini Electric Dredge

    Dragflow - Remote Controlled Mini Electric Dredge

    Design to fit in 20' container - ready to use . Winches for mooring an positioning . Safer because no humans are needed onto the barge . High solid content - up to 70% concentration by weight . Production up to 100 m3/h . Discharge distance up to 300m . Working depth up to 20m . Power from 5 to 18 HP . Possibility to integrate a GPS to keep truck of working activities . In combination with our 3G advanced control panel dredge operation can be...

  • Dragflow - Remote Controlled Modular Electric Dredge

    Dragflow - Remote Controlled Modular Electric Dredge

    Dragflow modular electric dredge. Fully wireless remote controlled. Design to fit in 40' container - ready to use. Winches for mooring an positioning. Safer because no humans are needed onto the barge. High solid content - up to 70% concentration by weight. Production up to 800 m3/h. Discharge distance up to 900m. Working depth up to 20m. Power from 25 to 120 HP. Jet Ring system as an option to ext ract compacted materials. Possibility to integrate a...

  • Dragflow - Portable Remote Controlled, Transportable, Hydraulic Dredge

    Dragflow - Portable Remote Controlled, Transportable, Hydraulic Dredge

    Dragflow Portable Hydraulic Dredge. Fully wireless remote controlled. Design to fit in 40' container - ready to use. Designed to be transported on a standard t ruck/trailer. Winches for mooring an positioning. Safer because no humans are needed onto the barge. High solid content - up to 70% concentration by weight. Production up to 800 m3/h. Discharge distance up to 1,2 km. Working depth up to 20m (an more on demand). Power from 24 to 160 HP....

  • Dragflow - Amphibious Dredges

    Dragflow - Amphibious Dredges

    High versatility work on land and water. Tracked wheels in cooperation with Laurini (Italy). Wide working area thanks to a strong hydraulic crane. Easy to handle: no winches or propeller needed. Comfortable operator cabin. IVECO or CAT Diesel Power Pack for optimum performance. Modular design for Container or standard Truck transportation.

  • Dragflow - Compact Dredges

    Dragflow - Compact Dredges

    Three compact and modular designs: steel cable - telescopic boom - ladder. Design to fit in 40' containers - ready to use. Winches for mooring an positioning. High solid content - up to 70% concentration by weight. Production up to 1400 m3/h. Discharge distance up to 1500m and more with Dragflow boosters. Working depth up to 100m. Power from 50 to 400 HP. Possibility to integrate a GPS to keep t ruck of working activities. In combination with our 3G...

  • Accessories

    Accessories for dredging automation, environmental dredging, turbidity control, long distance.

  • Anti-Turbidity Bell for environmental dredging

    Anti-Turbidity Bell for environmental dredging

    The sea sediments can be polluted by metals, hydrocarbons, bacteria, chemical substances which in most cases are toxic, resilient and accumulate as debries. A digging operation without turbidity limitation of the surrounding waters could cause serious damage to the marine ecosystem. This problem has been solved by Dragflow through the addition of a bell to capture the sediments and prevent water turbidity.

  • Azimutal Stern Thruster

    Azimutal Stern Thruster

    Aimutal stern thruster with hydraulic driving gear provides to the propulsion of the pontoon and acts as a shaft with a rudder angle of  +/-40°.

  • Booster Station

    Booster Station

    Projects that require a very long delivery distance, or to reach a high discharge level, might need a booster station. Submersible dredge pumps can be coupled with booster pumps to cover longer delivery distance. Boosters are powered by diesel, gas engines or electrical motors.

  • Dredging Monitoring System

    Dredging Monitoring System

    Dredging monitoring system allows to see on a pc screen the instant work in progress, with a top and side view of the dredging unit. control tools are available both to the operator on the machine and to distant operators. The terrestrial digital model is updated in real time recording the dredging operation and the extracted material. Several kits are available, starting from the one for tracking position respect to the terrestrial model up to a kit...

  • Hydraulic Oil Spools

    Hydraulic Oil Spools

    Spools permit the recovery of oil hoses. dragflow provides two different types: Spring spools: maxim dredging depth 12m, motorized spools.

  • Stabilizer Spuds

    Stabilizer Spuds

    Coupled with, or in alternative, to swing winches it is possible to have stabilizer spuds moved by hydraulic winches.

  • Winches

    Winches

    The standard cable length of swing winches is 50mts for all the three different type of dredges. On request two additional models are available: Winches with a cable length of 133m. Winches with a cable length of  211m.

  • Dragflow Submersible Dredging Cutters

  • Dragflow - Model EL 100 - Electric Pumps

    Dragflow - Model EL 100 - Electric Pumps

    Dragflow launches on the market the new family of electric pumps EL 100. Throughout these five new pumps from 110 to 200 horsepower (EL110, EL110S, EL180, EL180S, EL200), Dragflow extends its wide range of products, designed and developed to answer all the customer needs, with a capacity up to 1.300 cubic meter per hour. The proposal of these innovative pumps confirm Dragflow as a world leader in the design, production and sales of heavy duty pumps....

  • Dragflow - Model EXEL - Electric Excavators

    Dragflow - Model EXEL - Electric Excavators

    Hydraulic and Electric Excavators are designed to let the pump works also in presence of very compact material.   Cutters are able to increase solid production by increasing the concentration of the slurries and permit to complete the dredging activities even in the most difficoult situations.

  • Model EL 300 A/B - Electric Pump

    Model EL 300 A/B - Electric Pump

    Main body: hardened material – spheroidal cast iron GS500, Wearing parts: high chrom, Motor housing: cast iron G25, Main shaft: austempering NiCrMo4 Steel

  • DRAGFLOW - Dredge Cutterhead

    DRAGFLOW - Dredge Cutterhead

    The DRAGFLOW Dredge Cutterhead is a custom engineered system. DRAGFLOW 's dredging specialists carefully analyze customer requirements and operating conditions to arrive at the design criteria – cutter profile, size, beta, arm quantity and shape, tooth size, tooth orientation. What is more, the combination of the Cutterhead with the agitator avoids any clogging problem at the pump suction. New DRAGFLOW 's Cutterhead can be used with every...

  • Dragflow - Model EL60 RI - No Clog Pump

    Dragflow - Model EL60 RI - No Clog Pump

    Dragflow welcome its newborn No Clog Pump EL60 RI. The first of the upcoming series of Recessed Impeller Pumps. No Clog Pump will present for the first time at Pollutec, the 26th international exhibition of environmental equipments technologies and services (Lyon Eurexpo France, December 2 -5).

  • Dragflow - Agitator for Unique Hi-Chrome Tool

    Dragflow - Agitator for Unique Hi-Chrome Tool

    A pump without Agitator is less efficient. That’s a fact. And not to be forget, it can cause pollution. We care about the Environment. That’s why our pumps come with the agitator. When you use pump without agitator you could not only face clogging, but also create some turbidity and contaminate the area. Meet Dragflow’s Agitator, our unique Hi-chrome tool, that allow to lift settled sediments, that otherwise, without the agitator,...

Products by Xylem, Inc.

  • CD Series

  • Godwin - Model CD300M - Dri-Prime Centrifugal Trash Pump

    Godwin - Model CD300M - Dri-Prime Centrifugal Trash Pump

    The Godwin CD300M Dri-Prime pump is a 12' (300mm) centrifugal trash pump perfect for your biggest jobs. Offering flows to 6,000 gallons per minute (380 liters per second), discharge heads to 200 feet (60M), and solids handling to 3-3/4' (95mm) in diameter, the CD300M moves large volumes of water and provides automatic self-priming to 28 feet (8.5M). For intermittent flows, the double high pressure mechanical seal means the CD300M can run dry...